sidharvey R92MSN0401412A Single Stage Gas Furnace Owner’s Manual

sidharvey R92MSN0401412A Single Stage Gas Furnace

Product Information

Specifications

• Model: R92MSN

• Heating Input (BTUH):

  • R92MSN0401412A: 40,000
  • R92MSN0601714A: 60,000
  • R92MSN0801716A: 80,000
  • R92MSN1002120A: 100,000

• AFUE (up to): 92.1%

• Cooling Capacity CFM range @ 0.5 in. W.C.:

  • 195-1090 for 40,000 BTUH model
  • 200-1340 for 60,000 BTUH model
  • 270-1790 for 80,000 BTUH model
  • 295-1870 for 100,000 BTUH model

• Operating Dimensions: 35 x 14-3/16 x 29-1/2 inches (889 x 361 x
  750 mm) for 40,000 BTUH model

• Shipping Weight: 122 lbs (55 kg) for 40,000 BTUH model

Product Usage Instructions

Installation
Follow the installation guidelines provided in the user manual.
Ensure proper ventilation and clearances are maintained.

Operation
Turn on the gas supply and power to the furnace. Set the desired temperature on the thermostat to activate the heating function.

Maintenance
Regularly clean or replace air filters to ensure efficient operation. Schedule annual professional maintenance to keep the furnace in optimal condition.

Troubleshooting
If the furnace is not heating properly, check for error codes o the display panel and refer to the troubleshooting section of the manual. Contact a professional if issues persist.

FAQ
Q: Can this furnace be used in mobile homes?
A: Yes, with the appropriate conversion kit, this furnace can be installed in manufactured (mobile) homes. However, additional fees may apply in certain regions.

R92MSN
Up to 92.1% AFUE,
Single-Stage, Gas Furnace

Efficiency/Performance

• Multi 18-speed, constant torque (MCT) ECM blower motor
• Enhanced diagnostics with easy to read 3 digit display for faults and status
• Up to 92.1% AFUE in upflow, horizontal and downflow positions
• Single-stage gas valve
• Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
• Approved for manufactured housing/mobile home applications with accessory (order separately)
• Select sizes approved for twinning, refer to accessory kit listing
• All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

Reliability/Durability

• Flame roll−out sensors standard

• Adjustable heating blower OFF delay

• Factory set blower ON delay

• RPJ® primary heat exchanger

• Stainless steel secondaryheat exchanger
  High temperature limit control designed to prevent overheating

• Direct ignition with Silicon Nitride ignitor

• High-quality, corrosion-resistant, one-piece steel cabinet

Easy-to-Install and Service

• Direct vent (2-pipe), single-pipe venting, or ventilated combustion air
• 24 VAC humidifier terminal, electronic air cleaner terminal
• 35” (889mm) high, for ease of installation
• Simplified, factory installed internal condensate drain system
• Quarter turn knobs for easy door removal and secure attachment
• Convertible to propane with gas conversion accessory kit
• Four position − upflow/downflow/horizontal (left/right) installation
• Twelve different venting configurations
• Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)
• Concentric vent available
• On-board NFC antenna makes setup a tap away when using the service technician app
• Slide out heat exchanger and blower assembly

Limited Warranty*

• 20-year heat exchanger limited warranty
• Five-year parts limited warranty – With timely registration, an additional five-year parts limited warranty
• For residential applications only. See warranty certificate for complete details and restrictions, including warranty coverage for other applications.

For California Residents: If installed with a manufactured (mobile) home conversion kit in SCAQMD: This furnace does not meet the SCAQMD Rule 1111 14 ng/J NOx emission limit, and thus is subject to a mitigation fee of up to $450. This furnace is not eligible for the Clean Air Furnace Rebate Program: www.CleanAirFurnaceRebate.com

Illustrations and photographs are only representative. Some Product models may vary

Use of the AHRI Certified TM Mark indicates a manufacturer’s participation in the program. For verification of certification for individual products, go to www.ahridirectory.org

Unit Performance DataCERTIFIED

Model Number| Heating Input (BTUH)| AFUE (up to)| Cooling Capacity CFM range @ 0.5 in.

W.C. (125 Pa)

| Operating Dimensions Height x Width x Depth inches (millimeters)| Shipping Weight lbs (kg)
---|---|---|---|---|---
Upflow/H| Downflow
R92MSN0401412A| 40,000| 92.1%| 92.1%| 195-1090| 35 x 14-3/16 x 29-1/2 (889 x 361 x 750)| 122 (55)
R92MSN0601714A| 60,000| 92.1%| 92.1%| 200-1340| 35 x 17-1/2 x 29-1/2 (889 x 445 x 750)| 136 (62)
R92MSN0801716A| 80,000| 92.1%| 92.1%| 270-1790| 35 x 17-1/2 x 29-1/2 (889 x 445 x 750)| 144 (65)
R92MSN1002120A| 100,000| 92.1%| 92.1%| 295-1870| 35 x 21 x 29-1/2

(889 x 533 x 750)

| 160 (73)

References

• ahridirectory.org

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>