Ticova C9 Ergonomic Office Chair Instruction Manual
- June 17, 2024
- Ticova
Table of Contents
Ticova C9 Ergonomic Office Chair Instruction Manual
STEP :1 Assemble bve legs and leg core using M6 * 18mm screws(A) Make sure the holes of leg and leg core are aligned.
- Please do not remove black plastic parts in the legs.
STEP : 2 Assemble the wheels, leg cover and gaslight.
STEP : 3 Connect the armrests and seat using M6 18mm screws(A). Make
sure the armrest bracket is tilting front while assembly There are L/R symbols
on the armrests. The left armrest is in white bag and the right armrest is in
blue.
STEP : 4 Assemble the mechanism using M6 * 18mm screws(A) .
STEP: 5 Connect the back and mechanism using M8*20mm screws(B) .
STEP : 6 Put the gaslight into mechanism hole.
Attention
- Please keep the allen key. If the chair is noisy, shaky or uneven, please tighten the screws, especially for the chair leg screws.
- Please sit deeper and raise lumbar support to experience stronger lumbar support.
STEP
|
Legs 5pcs| | | Legcore Tpcs
---|---|---|---|---
Leg cover 1pcs| | | Gaslight ~ 1pcs
Wheels 5pcs| | | Seat 1pcs
| (A)M6*18 20+4|
(C)5mm
| Headrest 1pcs| | | Back 1pcs
| (B)M820 3+1| | | | [Right Armrest
*Left Armrest
| Armrest 2pcs
-
Raise the seat: Turn the handle clockwise and stand up.
Lower the seat: Tum the handle clockwise and sit down.
Lock tilting:Push in the handle Unlock tilting:Pull out the handle and lean back until a ‘click’ sound -
Tum clockwise to increase back tilt tension
Turn anticlockwise to decrease back tilt tension
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>