BH T51 5.5 Inch Triple 2RU Triple 2RU Rack Mount Monitor User Manual

BH T51 5.5 Inch Triple 2RU Triple 2RU Rack Mount Monitor

Specifications

• Screen Size: 5.5-inch
• Mounting: Triple 2RU Rack-mount
• Resolution: FHD 1920×1080 IPS
• Input Options: VIDEO, AUDIO, HDMI, 3G-SDI
• Features: Three-color Tally indicator, Custom buttons, Custom 3D-LUT, Advanced functions

Product Usage Instructions

Caution

1. Use only the provided adapter or a qualified one.
2. Avoid extreme temperatures and humidity.
3. Avoid exposure to strong light.
4. Avoid heavy impact or dropping.
5. Do not use chemical solutions for cleaning; use a soft cloth instead.
6. Do not attempt to repair or disassemble the unit yourself.

Power Input Ways
There are two ways to power the monitor:

• A. Direct plug-in DC power input port with a standard DC5.5*2.1m adapter.
• B. Via 4-pin XLR interface power supply.

Connection Instructions

1. Connect the monitor to a DC12V power supply for automatic turn-on.
2. Connect signals for each monitor separately for display.

Front Panel Instructions:

• Tally indicator for mode and input signal selection.
• Menu button for navigation and confirmation.
• Custom function buttons for shortcuts.
• Earphone jack port available.

Rear Panel Instructions

• Various input ports including 3G/SDI, CVBS, AUDIO, HDMI, USB, TALLY.
• Power input options through DC 12V or 4-pin XLR interface.

FAQ

• Q: Can I use any adapter with the monitor?
  A: It is recommended to use the provided adapter or a qualified one to avoid damage to the monitor.

• Q: Is it safe to clean the monitor with chemical solutions?
  A: No, please only use a clean soft cloth to maintain the brightness of the surface.

• Q: Can I disassemble the monitor for repair?
  A: It is advised not to take apart or repair the unit yourself to prevent damage to the product.

5.5-inch Triple 2RU
Rack-mount Monitor

User Manual

Foreword
Thank you for purchasing our triple rack-mount monitor, please read this manual carefully before using the unit, have a nice experience.

Caution

1. Please use the adapter attached in the accessory, if necessary, please use qualified adapter.
2. Please do not store or use in too cold, too hot or humid place.
3. Please keep the monitor away from the strong light while using this product to ensure the image effect and long-term use.
4. Please avoid heavy impact or drop onto the ground.
5. Please do NOT use chemical solutions to clean this product. Please wipe the monitor with a clean soft cloth to maintain the brightness of the surface.
6. No adjustable components in the monitor. Please do not take apart or repair the unit by yourself, to avoid the damage of the product.

Function Feature

• Triple rack mount LCD monitor, compact thin and lightweight design, which make it suitable for installing where the space is limited and also could be installed in the standard 19-inch rack.
• FHD1920x1080 IPS, view details with confidence
• Three-color Tally indicator, enhance team cooperation
• With VIDEO, AUDIO, HDMI, 3G-SDI input, suitable for a variety of signals.
• Custom buttons, could set the custom F button function as customers operating habit.
• Load custom 3D-LUT, preview film look
• All waves accurately analysis, save budget
• With advanced functions like Center Marker, Safe Frames, Check Field, Focus Assist, Over Exposure, Audio Meters, Image Flip, P2P, Image Freeze, etc.
• 3.5mm headphone jack output

Product Instructions

Front Panel

| Previous item selection/parameters increasing after enter the menu;

Volume increasing adjustment when menu without display

⑤| ****| Next item selection/parameters decreasing after enter the menu;

Volume decrease adjustment when menu without display

---|---|---
⑥| ****| Custom function shortcut button

**** Menu return/exit

⑦| F2| Custom function shortcut button
⑧| **| ON/Standby button
⑨| **| Earphone jack port

Rear Panel

(optional）

| IN (SDI serial data input) OUT(SDI serial data output)
---|---|---
④| CVBS| IN(Composite video broadcast signal input)

OUT(Composite video broadcast signal output)

⑤| AUDIO| L(Audio signal left stereo input)

R(Audio signal right stereo input）

⑥| HDMI| IN(High definition multimedia interface input) OUT(High definition multimedia interface output)
⑦| USB| Firmware update,LUT file importing port
⑧| TALLY| TALLY indicator input port

Power Input Way
There are two ways of power supply to our monitor:

• The direct plug-in DC power input port supply. You can use the standard DC5.5*2.1m DC power adapter, power input polarity as shown below:
• Via 4 pin XLR interface power supply.
  Polarity of the 4-pin XLR power input as shown below, please note the polarity of the power input, otherwise it may damage monitor.

TALLY Indicator Connection

Operation Instruction

1. After connecting to the DC12V power supply, the three monitors automatically turn on
2. Connect the signal for each monitor separately, the screen will display the connected video image
3. Press “MENU” key enter to main menu, press or button to select the first level menu, press “MENU” key to confirm after selecting and enter the second level menu
4. Press button to selection the function of second level menu, press “MENU” key to confirm after selecting and enter the third level menu
5. Press button select open/close function or select the needed parameters, press “MENU” key to confirm after selecting.
6. Press ****key to return/exit menu

Remark: the buttons on each monitor are independently control

Menu Function Instruction

Functional Assist

  All Waves

| On, Off

After turning on, waveform, vector, histogram and

embedded audio will be shown.

---|---

  Waveform

| On, Off

Mode：RGB、YUV、Y

This essential feature assists with the calibration of professional video cameras. It shows the overall brightness of the image assisting the video professional in correcting exposure. The waveform feature also checks the evenness of the lighting when lighting a chromakey or background.

Waves Trans.：Off, 25%, 50%, 75%

  Vector

| On, Off

shows how saturated the image is and where the pixels in

the image land on the color spectrum.

     Histogram| On, Off

Mode ： RGB1 、 RGB2 、 Y

RGB Histogram:It can display the graphic of color tone distribution, can intuitively display the exposure status of the image, and display overlapping histograms in red, green, and blue channels Y Histogram: A quantitative tool to check the picture brightness, display different color for different brightness.

Focus Assist

| On, Off

Color： （Red, Green, Blue）

Peaking Level：you can adjust the peaking level after turning on（1～10）

It highlights the areas that are in focus so you are able to quickly focus the camera and not miss crucial shots.

---|---

    Embedded Audio

| On, Off

The Audio Level Meters provide numerical indicators and headroom levels. The audio meter is green, and will turn yellow when exceeds -20dB, and turn red when exceeds

-9dB.

The Audio Level Meters provide numerical indicators and headroom levels.

    Over Exposure| On, Off

Exposure Level： you can adjust the exposure level after turning on （10~100）

Areas of the image over a certain threshold are filled with a striped pattern to dramatically highlight areas where too

much light is falling on the image sensor.

Check Field

| On, Off

Mode：Red, Green, Blue, Mono

When enabled, hue and saturation adjusted quickly and

accurately

False Colors

| On, Off

An image that depicts an object in colors that differ from

those a photograph (a true color image) would show.

     Time Code

(Only under SDI signal)

| On, Off

Mode: LTC, VITC

Mark

Display

User

    LUT| On, Off

After the LUT Switch is turned on, you can use the Lut (SLOG2, SLOG3, LOGC, VLOG).

Lut Import ： Confirm

**Lut Table**

**** Show the 4 built-in Lut and the custom load Lut (up to 32）

---|---
     Display Adjustment| Backlight ： 0~100

**** Adjust the screen brightness

**Brightness ： 0~100**

| Adjust the image brightness

Contrast ： 0~100

Adjustment of the ratio between the brightest and darkest parts of the image . When adjusting, pay attention to the sense of hierarchy in the image. If the proportion is too large or too small, it can cause the image to lose its colorful appearance.

Saturation ： 0~100

Adjustment of color concentration

Tint ： 0~100

---|---

  Color Adjustment

| Color Temp. ： 5600K, 6500K, 9300K, User

Under the User , the red, green and blue of the image can be adjusted (0~255)

Shortcut Key

| All Waves, Waveform, Vector, Histogram, Embedded Audio, Center Marker, Safe Frames, Nine Grid, Focus Assist, False Colors, Over Exposure, Anamorphic, Image Freeze, Check Field, Zoom, Image Flip, Aspect Ratio

To set the 2 shortcut custom button F1, F2 on the panel e.g.: Press MENU button enter menu ,  ,

button select User and press “MENU” button to confirm. Then select Shortcut Key and press “MENU” to

confirm, select F1 and confirm to pop-up function items， then select one of them and press to confirm, the cursor will be changed to gray color after confirmed.Same setting for F2

System

How to Load LUT

Prepare tool: USB flash driver, mini USB to USB cable

1. USB flash driver format FAT32
2. Max Files Limit Maximum 32 Lut files 4.3 File requirements
   • The LUT file format suffix should be .cube
   • Single file not exceeded to 7.9Mb
   • Support LUT-3D-Size 16,17,32,33,64,65

Remark : LUT file name must be English or Arabic numerals

Steps for loading

1. Make sure USB flash driver insert to the mini USB to USB can and connect with the USB interface of monitor.

2. Enter main menu –LUT–Lut Import — press the “MENU” key
   Confirm to import the 3D LUT file, the monitor will auto detect the USB flash driver.
   If there is valid lut file in USB flash driver, the monitor will load LUT files and show “[n] name. The [n] shows the quantity number. The “name” should in LUT files’ name. If load successful, the screen will show “complete[n]”. [n] Stands for the quantity number for lut files should under 32.

   • PS: How to clear up the imported LUTs?
     Insert a empty USB flash driver to the monitor, enter main menu
     –LUT–Lut Import — press the “MENU” key Confirm, the imported LUTs will be clear up.

Support Signal Formats

HDMI

| 1080i(60/59.94/50）

1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF)

 | 4K UHD 3840×2160p (30/29.97/25/24/23.98 Hz)
 | 4K 4096×2160p (24Hz)
 | 720p (60/59.94/50/30/29/25/24/23.98)
SDI| 1080i (60/59.94/50)
 | 1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF)

Parameters

Trouble Shooting

If there is any problem when using the unit, please try following ways to inspect and solve. Please contact us if you still can not solve it or have other problems.

Without image display                                              Trouble shooting

◆  Video cable off or connect incorrectly| Check the quality of the cable, make

**** sure the correct input interface

---|---
**** ◆  Without video signal input| Check the signal source and output

**** interface connect is correct or not

◆  Monitor is not be powered on| Check whether the power is connected
◆  Supply voltage instability| The power adapter plug is poor connected with the socket
◆  self-contained power supply, polarity connect inversely| **** Reference “Power Input Way” and reconnect

Image/color display abnormal                                Trouble shooting

environment to try again
◆  Video input signal amplitude too low| Check signal source video output, or

**** change signal source and have a try.

◆  Menu color saturation adjustment closing| Enter menu to check color, or reset to factory settings
◆  Check Field set in mono or black & white| **** Reset Check Field, back to the color
◆  Image deformation| Reset the image ratio

Earphone without sound                                            Trouble shooting

◆  Audio cable off or connection properly| Confirm connected with the corresponding input port
---|---
◆  Volume adjustment was closed| Reset the volume control and adjust to a proper position.
◆  HDMI cable poor Connected| Check the quality of cable, or change cable and have a try
◆  No sound after switch video signal| Check whether there is an AUDIO signal input in AV Mode.

Remark:

• If there are still other problems, please contact with our related technical persons.
• If there are changes without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>