SHARP 4T-C65GU8500X Led Backlight Monitor User Guide
- September 25, 2024
- Sharp
Table of Contents
- 4T-C65GU8500X Led Backlight Monitor
- Specifications:
- Product Usage Instructions:
- Package Contents:
- Installation Steps:
- Cleaning and Maintenance:
- Safety Precautions:
- Q: Can I use liquid cleaners to clean the monitor?
- Q: How should I position the monitor during assembly?
- Q: What should I do if I encounter an issue with the
4T-C65GU8500X Led Backlight Monitor
“`html
Specifications:
- Model: KSETLA937WJN1
- Type: LED Backlight Monitor
- Models Available: 4T-C65GU8500X, 4T-C75GU8500X
Product Usage Instructions:
Package Contents:
- Monitor
- Batteries x2 & Remote Control
- Stand Supports x2
- Quick Start Guide For Stand
- Stand Base
- Terminal Cover
- Supports Screws x4 & Base Screws x6
Installation Steps:
1. Assemble a Simple Table:
Place the packing case face up and follow the instructions to
position the packing materials correctly.
2. Lay Down the Monitor:
Ensure the screen faces down when taking out or assembling the
monitor. Remove the bottom packing material after laying down the
monitor.
3. Installation of Stand Supports:
Fix each stand support by fastening two stand screws
vertically.
4. Installation of Stand Base:
Use the top left/right packing material as a jig to position the
Stand Base correctly. Fix each Stand Support and Stand Base with
provided screws.
Cleaning and Maintenance:
Avoid using liquid cleaners, aerosol cleaners, or chemical
cloths on the product. Take care near children and pets. Do not
touch the screen directly.
Safety Precautions:
Avoid touching the screen directly to prevent damage. Refer to
qualified service personnel for any maintenance needs. Keep away
from non-insulated dangerous voltage areas.
FAQ:
Q: Can I use liquid cleaners to clean the monitor?
A: It is not recommended to use liquid cleaners as they may
damage the product. Use a soft, dry cloth for cleaning.
Q: How should I position the monitor during assembly?
A: Make sure to lay down the monitor with the screen facing down
and follow the provided instructions for correct assembly.
Q: What should I do if I encounter an issue with the
product?
A: If you experience any problems with the product, please
contact qualified service personnel for assistance.
“`
KSETLA937WJN1
LED BACKLIGHT MONITOR
4T-C65GU8500X 4T-C75GU8500X
https://global.sharp/restricted/support/aquos/emanual/asia/pdf/gu/android11/Index.html
SHARP 4T-C65GU8500X 4T-C75GU8500X N080105-003402-002 2024-05-14
CONTENT
PREPARATION ………………………………………………………………………………………………………………………………. 1 WARNING AND
PRECAUTION …………………………………………………………………………………………………….. 4 TERMINAL DIAGRAM
…………………………………………………………………………………………………………………… 7 TERMINAL CONNECTION
……………………………………………………………………………………………………………. 8 REMOTE CONTROL
……………………………………………………………………………………………………………………… 9 MONITOR SET FUNCTION AND
INDICATOR ……………………………………………………………………………… 10 BASIC OPERATION
……………………………………………………………………………………………………………………… 11 END USER LICENSE AGREEMENT
…………………………………………………………………………………………….. 12 TROUBLE SHOOTING
………………………………………………………………………………………………………………….. 15 SPECIFICATION
…………………………………………………………………………………………………………………………… 17 LICENSE
……………………………………………………………………………………………………………………………………….. 19 RESTRICTED SUBSTANCES
AND ITS CHEMICAL SYMBOLS ………………………………………………….. 20
monitor 4). Accessories may vary depending on the region or model.
1. Open the package. 2. Take out the monitor. 3. Install the monitor stands.
4. Connect the power cord.
Batteries x2 & Remote Control
Stand Supports x2
Quick Start Guide For Stand
Stand Base
Terminal Cover
Terminal Cover Installation
Supports Screws x4 & Base Screws x6
1. Take out the terminal cover from the top left/right packing material.
terminal cover
Quick Start Guide For Stand
4T-C75GU8500X use top left packing material 4T-C65GU8500X use top right
packing material
(“TR” / “TL” is written on it)
¸Please use “TR” / “TL” packing material when installing monitor stand. 2.
Place the terminal cover on the corresponding position of the rear shell, and
promote the terminal cover in the direction of the opposite arrow. The sound
of the buckle sounds indicate that it has been installed.
terminal cover the arrow
1
1. Assemble a simple table
Side packing material
Side packing material 4T-C75GU8500X use top left packing material 4T-
C65GU8500X use top right packing material
(“TR” / “TL” is written on it)
1 . Place the packing case face up. 2 . Put the two side packing materials into the left and right side of the packing case. 3 . Please put the top right/left packing material (TR/TL) into the middle position in the packing case. (The putting position as shown in the left image)
2. Lay down the monitor
When taking out the monitor or assembling the monitor, make sure to put the monitor with the screen facing down.
screen
Make sure that the bottom packing material is put close to the simply
assembled table. After laying down the monitor, take away the bottom packing
material. 3. Installation of Stand Supports Fix each stand support by
fastening two stand screws.
Packing Case
Detail image
Stand Support NOTE: Please install the stand supports vertically.
2
Stand Supports
4. Installation of Stand Base
Stand Base
Packing Case
4T-C75GU8500X use top right packing material 4T-C65GU8500X use top left packing material
(“TR” / “TL” is written on it)
1 . Use Top left/right packing material (TL/TR ) as a jig and put it on the floor with the side with the yellow
sticker facing up and in the direction of the below illustration.
2 . Insert Stand Base in the slit of Top left/right packing material (TL/TR).
The side with the arrow mark is the back side of Stand Base.
3 . Fix each Stand Support and Stand Base with three screws provided.
Stand Base
CAUTION
· When installing stand supports and the stand base, please tighten it. ·
After fixing, please shake to confirm whether all the screws are tightened. 5.
Stand up the monitor 1 . Holding up the monitor, remove Top left/right packing
material (TL/TR ).
c±At least three people are needed for this work. 2 . Stand up the monitor.
Note: the hand position when holding the monitor.
Be careful not to touch the screen when holding the monitor.
Stand Base
CAUTION
· After the installation is complete, if you find that the monitor is tilted,
please loosen the screws slightly to go back to the step 3 (Installation of
Stand Supports) and make the monitor shift to the horizontal, and then tighten
the screws again.
3
· Stand base must be attached to prevent the monitor set from falling down and
cause injuries. · Cleaning — Unplug the AC cord from the AC outlet before
cleaning the product. Use a soft damp cloth to clean
the product. Do not use liquid cleaners, aerosol cleaners or chemical cloth to
clean it, as such materials may damage the product.
· Water and moisture — Do not use the product near water, such as bathtub,
washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement.
· Do not place vases or any other water-filled containers on this product. The
water may spill onto the product causing fire or electric shock.
· Stand — Do not place the product on an unstable cart, stand, tripod or
table. Doing so can cause the product to fall, resulting in serious personal
injuries as well as damage to the product. Use only a cart, stand, tripod,
bracket or table recommended by the manufacturer or sold with the product.
When mounting the product on a wall, be sure to follow the manufacturer’s
instructions. Use only the mounting hardware recommended by the manufacturer.
· When relocating the product placed on a cart, it must be moved with utmost
care. Sudden stops, excessive force and uneven floor surface can cause the
product to fall from the cart.
· Ventilation — The vents and other openings in the cabinet are designed for
ventilation. Do not cover or block these vents and openings since insufficient
ventilation can cause overheating and/or shorten the life of the product. Do
not place the product on a bed, sofa, rug or other similar surface, since they
can block ventilation openings. This product is not designed for built-in
installation; do not place the product in an enclosed place such as a bookcase
or rack, unless proper ventilation is provided or the manufacturer’s
instructions are followed.
· The LCD panel used in this product is made of glass. Therefore, it can break
when the product is struck forcefully or with a sharp object. If the LCD panel
is broken, be careful not to be injured by broken glass.
· Heat sources — Keep the product away from heat sources such as radiators,
heaters, stoves and other heat-generating products (including amplifiers).
· To prevent fire, never place any type of candle or naked flames on the top
or near the monitor set. · To prevent fire or shock hazard, do not place the
AC power cord under the monitor set or other heavy items. · Do not place heavy
objects on this product or stand on it. Doing so could cause injury if the
product overturns.
Take special care near children and pets.
· The LCD panel is made with extremely high precision technology, and has
99.99% or more effective pixels. The 0.01% or less missing pixels or those
that are always lit is not a malfunction.
·
CAUTION
This lightning flash with arrowhead symbol within an equilateral triangle is Intended to alert the user to the presence of non-insulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
To reduce the risk of electric shock. Do not remove cover (or back). No user serviceable parts inside. Refer
to qualified service personnel. The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance instructions in the literature accompanying
the appliance.
·
Protective earthing terminal. The apparatus should be connected to a mains socket outlet with a
protective earthing connection.(Only for Class I appliance)
· If the apparatus doesn’t have the symbol in its rating label and its power cord has three pins, it means protective earthing connection is needed. The apparatus should be connected to a mains socket outlet
with a protective earthing connection.(Only for Class I appliance)
Precautions when transporting the monitor
When transporting the monitor, never carry it by holding or otherwise putting
pressure onto the display. Be sure to always carry the monitor by two people
holding it with two hands — one hand on each side of the monitor.
· Do not display a still picture for a long time, as this could cause an
afterimage to remain. · Install the product on the place where the AC cord can
be unplugged easily from the AC outlet or from the AC
INPUT terminal on the rear of the product.
· Do not install the monitor in a location in which it will be subject to
water drops such as underneath an air conditioning unit or in the vicinity of
a humidifier. · Water drops falling onto the monitor and water entering inside
it may result in fire, electric shock, or malfunctions. · We recommend that
you install the monitor at least 1m away from the outlet of an air
conditioner. ¸ Please dispose monitor properly when disposed. Please call The
Environment Protection Administration’s resource recycling toll-free hotline
0800-085-717, consult the resource recycling industry for more infomation or
related questions, or contact and request the located City Sanitation to clean
up. 4
Positioning the monitor
Install Display on solid horizontal surface such as a table or desk. For
ventilation, leave a space of at least 10cm free all around the set. To
prevent any fault and unsafe situations, please do not place any objects on
top of the set.
Fix the rear of enclosure to wall(only for some countries)
Warning: Stability Hazard A monitor set may fall, causing serious personal
injury or death. Many injuries, particularly to children, can be avoided by
taking simple precautions such as: – ALWAYS use cabinets or stands or mounting
methods recommended by the manufacturer of the monitor set. – ALWAYS use
furniture that can safely support the monitor set. – ALWAYS ensure the monitor
set is not overhanging the edge of the supporting furniture. – ALWAYS educate
children about the dangers of climbing on furniture to reach the monitor set
or its controls. – ALWAYS route cords and cables connected to your monitor so
they cannot be tripped over, pulled or grabbed. – NEVER place a monitor set in
an unstable location. – NEVER place the monitor set on tall furniture (for
example, cupboards or bookcases) without anchoring both the furniture and the
monitor set to a suitable support. – NEVER place the monitor set on cloth or
other materials that may be located between the monitor set and supporting
furniture. – NEVER place items that might tempt children to climb, such as
toys and remote controls, on the top of the monitor or furniture on which the
monitor is placed. If the existing monitor set is being retained and
relocated, the same considerations as above should be applied.
Mounting on a Wall
An optional wall mount can be used with your monitor. Consult with your local
dealer to purchase the recommended wall mount bracket. Carefully attach the
wall mount bracket at the rear of the monitor. Install the wall mount bracket
on a solid wall perpendicular to the floor. If you are attaching the monitor
to other building materials, please contact qualified personnel to install the
wall mount. Detailed instructions will be included with the wall mount. Please
use a wall mount bracket where the device is adequately secured to the wall
with enough space to allow connectivity to external devices.
To prevent product damages or personal injuries, please make sure that the
monitor screen is kept upright, or tilted upward or downward within the angle
range of 0°~5°while mounting the monitor onto the wall.
In case of exceeding the above angle range (0°~5°) of tilting downward, please
purchase the auxiliary accessories from the local dealer to mount the monitor
for safe installation and usage. Otherwise, it will not be covered by the
warranty and the user should be liable for all consequences and
responsibilities.
5
Disconnect the power before moving or installing the monitor. Otherwise
electric shock may occur.
Remove the stand before installing the monitor on a wall mount by performing
the stand attachment in reverse.
If you install the monitor on a ceiling or slanted wall, it may fall and
result in severe injury. Use an authorized wall mount and contact the local
dealer or qualified personnel. Otherwise it is not covered by the warranty. Do
not over tighten the screws as this may cause damage to the monitor and void
your warranty. To prevent injury, this apparatus must be securely attached to
the floor/wall in accordance with the installation instructions. Use the
screws and wall mounts that meet the following specifications. Any damages or
injuries by misuse or using an improper accessory are not covered by the
warranty.
Spacer (Not included) Side view Front view
10mm
10mm
8mm 18mm
Note: 1. The picture are only reference. 2. The top two screws that fix the
wall mount are needed two spacers also. It is a small hollow pillar with a
height of 10 mm and a spacer hole diameter of 8 mm.Place the spacers so that
the screw holes on the rear cabinet and the holes on the spacer overlap.
Precautions For Using Remote Control
Use the remote control by pointing it towards the remote sensor. The items
between the remote control and the remote sensor will interfere the normal
operation. Do not make remote control vibrate violently. Also, do not splash
liquid on the remote control, also do not put the remote control in high
humidity place. Do not place remote control under direct sunlight which will
cause deformation of the unit by heat. When the remote sensor is under direct
sunlight or strong lighting, the remote control will not work. If so please
change the lighting or monitor’s position, or operate the remote control
closer to the remote sensor. Before Bluetooth searching, please make sure you
have turned external Bluetooth devices in the pairing mode. For the Bluetooth
remote control supplied with the monitor (may not be available), you can press
BACK and HOME buttons together to open its pairing mode. For other Bluetooth
devices, please read their own instruction manuals for opening the pairing
mode.
Precautions For Using Battery
Improper using of the battery will cause leakage. So please do as the
following methods and use carefully. Please note the batteries’ polarity, to
avoid short circuit. When the battery’s voltage is insufficient which affect
the use range, you should replace new battery. Remove the batteries from the
remote control unit if you do not intend to use it for a long time. Do not use
different types of batteries (for example, Manganese and Alkaline batteries)
together. Do not put the battery into fire, and charge or decompose the
battery. Please dispose of batteries in compliance with relevant environmental
protection regulations. WARNING: The batteries (battery pack or batteries
installed) shall not be exposed to excessive heat such as sunshine, fire or
the like.
6
TERMINAL DIAGRAM
Note: The pictures are only reference. Terminal quantities and names may vary
depending on the region or model. monitor (rear view)
7
TERMINAL CONNECTION
Note: 1). Terminal quantities and names may vary depending on the region or
model. 2). External equipments and cables shown herein are not supplied with
the monitor. 3). To avoid product damage or personal injury, please make sure
that you have disconnected the monitor power cord before connecting the
external devices.
AV IN
Receive analog audio and video signals
AV IN
from external AV devices.
USB
Connect a USB storage device.
USB
HDMI
Receive digital audio and video signals
HDMI
from external HDMI devices.
DIGITAL AUDIO OUT
Use an optical cable to output your monitor’s audio signal to a compatible
digital audio receiver.
DIGITAL AUDIO OUT
LAN
Wired network port.
LAN
8
REMOTE CONTROL
Note: 1). The image, buttons and functions of remote control may vary
depending on the region, model or source. 2). You can press the MIC button to
quickly pair the Bluetooth remote control with your monitor set. 3). Fast boot
standby state: State that the monitor quickly stands up Shut down standby
state: State that the power consumption is reduced
1. POWER ( ): Turn on the monitor, short press to fast boot standby state;
long press to turn the monitor to shut down standby state
2. MUTE ( ): Mute or restore the monitor sound.
3. Application Buttons: Access specific applications quickly and directly.
4. Favorite Button:
1
2 *How to assign an app or a system function
· Press Favorite button to display Daily Key.
3
· Select an app or a system function to assign to Daily Key.
*When an app or a system function is assigned
4 · Short press Favorite button to open the app or the system function you
5
assigned.
7
6 · Long press Favorite button to display Daily Key screen.
8 5 & 6. Teletext Buttons · TEXT: Access or exit the teletext menu.
9
10 · REVEAL: Display or hide the concealed information.
· INDEX: Display index page.
12
· HOLD: Hold the teletext page on screen without updates or changes.
11
7. Media Player Buttons
· Play/Pause ( ): Start or pause the playback.
· Fast Backward ( ): Fast backward the playback.
13
14 · Fast Forward ( ): Fast forward the playback.
15
8. MIC ( ): Start using the near field voice function.
17
16 · Short press MIC button to wake up the voice assistant.
· Long press MIC button to start receiving your voice command. After
your speaking, release MIC button to run voice function.
18
19 9. ACCOUNT ( ): Sign in with your Google account to get
the entertainment you love. 20 10. Dashboard ( ): Access the dashboard of your Google.
11. UP/DOWN/LEFT/RIGHT ( / / / )
Navigate the menu to select the content you need.
21
· Press UP/DOWN button to switch channels.
12. OK: Confirm, enter or execute the selected itemor access
22
23 the channel list.
24 13. BACK ( ): Return to upper-level content, or exit the current screen.
14. GUIDE ( ): Switch to the monitor mode.
15. HOME ( ): Access the home screen.
16. INPUT/ SOURCE( ): Access the source menu.
17. EXIT: Exit the current operation. 18. Volume Up/Down (VOL +/-): Adjust the sound volume. 19. Program Up/Down (P / ): Switch channels.
20. FAV: Access the list of favorite channels.
21. Number Buttons (0~9): Select the channel directly, or input a number.
22. INFO: Access the INFO interface.
23. AD: Adjust audio settings including audio language, sound tracks, audio type, and so on
24. Color Buttons (R/G/Y/B):
Execute the prompt function in specific mode.
9
MONITOR SET FUNCTION AND INDICATOR
Note: 1). The colour of indicators lit in various modes or circumstances may
vary depending on the region or model. 2). The voice function may not be
available depending on the region, model or language.
1. monitor Control Button( )
- In fast boot standby state , which is less energy saving,
press monitor control button, which is on monitor
bottom to turn on the monitor in a short time.
- In shut down standby state, which is more energy saving,
press monitor control button, which is on monitor
bottom to turn on the monitor in a standard time. *In working status:
When short press monitor control button the keypad
menu will appear on the bottom of screen.Then select
keypad menu by pressing monitor control button shortly.
12 3 4
5
4
6
Long press monitor control button to execute the keypad
menu you selected.
Note: Long press monitor control button to turn the monitor to shut down standby state when keypad menu isn’t displayed.
2. Remote Sensor Receive the signal transmitted by the remote control.
3. Power Indicator Indicate the status of the monitor power. Lit in red:
fast boot standby state / shut down standby state Unlit: working mode /
power off.
4. Hands free MIC Microphones of Hands free MIC voice function. It is best to
keep yourself within 3 meters away from the Hands free MIC while using the
Hands free voice function.
5. Hands free indicator Indicate the status of Hands free MIC voice function.
- Lit in white: Hands free MIC are turned on,and Hands free MIC voice function is being used. Unlit: Hands free MIC voice function is not being used. Lit in orange: Hands free MIC are turned off. 6. Switch of Hands free MIC Turn on or turn off Hands free MIC switch, which is on monitor bottom. Only after turning on the Hands free MIC, successfully connecting your monitor to the network and signing in to your Google account, you can start to use the Hands free MIC voice function by saying the hotword: “Ok Google” or “Hey Google”.
“Google Assistant is not available in certain languages and countries. Availability of services varies by country and language. Find out more at https://support.google.com/assistant”
Note: If you select “No thanks”, how can you set to “Yes, I’m in” without reset the monitor? Please use the following procedure 1. From the ACCOUNT ( ): , select “Manage accounts” > “Google Assistant” > “Hands-free MIC”. 2.Turn on the Hands-free MIC. 3.Use the far field voice function by saying the hotword: “Ok Google” or “Hey Google” and choose the “Yes, I’m in”.
10
VOICE CONTROL MIC ON RC
1
1. Voice control MIC
Microphone of voice function.
It is best to keep your mouth within 5 centimeters away from the microphone while
using the voice function.
2
2. MIC button of voice function
Press to start using the voice function. Only after successfully connecting your monitor
to the network, pairing the Bluetooth remote control with your monitor and signing in to
your Google account, you can press MIC button to start using the voice function.
Pair Bluetooth® remote control with your monitor
For the remote control supplied with your monitor, please
finishpairingwithyour monitor before using it for function. The pairing can be
done by just pressing the MIC button on any interface, or at the first step of
“Initial Settings”, or in “Settings”. In settings, please refer to the
following steps to pair the remote control: 1. Select Dashboard button < >icon
Remotes & Accessories Pair accessory. 2. PressBACK and HOME buttons
simultaneously until there shows the name of your Bluetooth remote control on
the monitor searching interface. 3. Press OK button to start pairing. 4. It
will show “Paired” after Bluetooth remote control is paired with the monitor
successfully.
BASIC OPERATION
1 . Stand the remote control upside down as shown in the right illustration
and press lightly the part marked with . 2 . Pressing down, pull the remote
control from the both sides to remove the back cover. (It may be hard at
first, so please pull with a little force.) 3 . Place two AAA size batteries
in the remote control’s battery compartment, making sure to match the polarity
markings inside the compartment. (Make sure to put batteries in the minus (-)
side at first.)
3 “AAA” size battery
WARNING: A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
11
END USER LICENSE AGREEMENT
1. General Please read this agreement carefully before using this monitor.
Using this monitor indicates your acceptance of this agreement. We reserve all
rights not expressly granted to you in this End User License Agreement. The
End User License Agreement (“EULA”) is a legal agreement between you(user of
this monitor) and us (the monitor manufacturer) for the monitor software,
owned by us, third-party providers or third-party licensors. The monitor
software includes software for this monitor, including updated or modified
software, provided by us or third parties, whether stored on media or
downloaded to this monitor via any method, but not open source software.
2.Software License You can ‘ t use the monitor software except specified
herein. We and third-party licensors grant you a limited license to use the
monitor software only on this monitor. The monitor software may create data
files automatically and you agree that any such data files should be deemed as
a part of the monitor software. The monitor software is licensed as a single
product, and you should not separate its component parts for use on other
devices unless expressly authorized by us. The software of a third party may
be accompanied by a separate license, in which case you agree that such third-
party license will govern your use of such third-party software . You agree
not to modify, reverse engineer, decompile or disassemble the monitor software
in whole or in part, or to use the monitor software in whole or in part for
any purpose other than allowed under this EULA . In addition , you should not
monitor software. You shall not (1) bypass, modify, defeat or circumvent any
of the functions or protections of the monitor software or any mechanisms
operatively linked the monitor software; or (2) remove, alter, cover or deface
any trademark or notices on the monitor software. We and third-party licensors
retain all rights that this EULA does not expressly grant to you. This monitor
contains open source software which is subject to open source licenses. Some
GPL executables and LGPL / MPL libraries used in this monitor are subject to
the GPL2.0/LGPL2.1/MPL1.1 License Agreements. We hereby offer to deliver, upon
request, a copy of the complete corresponding source code for the copyrighted
open source software packages used in this monitor for which such offer is
requested by the respective licenses. This offer is valid for a period of
three (3) years from the date the distribution of this monitor by us. To
obtain the source code, please contact our service center. 3. Software Updates
or Modifications We, or third parties may update or modify the software from
time to time, for example, but not limited to, for the purposes of error
correction, improvement of features and enhancement of security features. Such
updates or modifications may change or delete the nature of features or other
aspects of the monitor software, including features you may rely on. The
updated or modified software will be provided to you by us or third parties
through the network or other methods. And you may have the right to decide
whether or not to accept or install such updates or modifications according to
your actual need. Generally, as for updates or modifications provided by us,
we recommend you to accept or install them for better use of this monitor, and
for some system-critical updates or modifications provided by us, which may
decide whether or not this monitor can be used normally and continuously, we
may automatically download and install such updates or modifications in this
monitor without asking for your acceptance. As for updates or modifications
provided by third parties, you decide completely at your own discretion, risk
or liability.Please do not turn off this monitor during software updating ,
otherwise it may cause serious problems for which you should be responsible by
yourself. 4. Network-Based Services and Contents This monitor has the smart
feature which provides access to selected application services ( the services
) from third-party providers. The smart feature requires a network connection.
Your ability to access the services, and the quality of the services
presented, are subject to your network provider’s service and terms as well as
the network speed you use. The contents, including but not limited to data,
music, sound, audio, images, graphics, likenesses, software, text, video,
messages, tags or other materials, provided by third-party providers, and the
availability of the services are at the sole discretion and under the control
of third-party providers. The contents and the services of each third-party
provider are provided pursuant to the terms and conditions of that third-party
provider. The services and the contents are only used for your own personal,
private viewing, and shall not be used for any viewing or exhibition for which
(or in a venue in which) an access, or viewing fee is charged, or for any
public exhibition or viewing. The services and the contents are not available
in all languages or in all countries or regions. Third parties make no
representation that the services and the contents are appropriate or available
for use in any particular location. To the extent you choose to use or access
the services and the contents, you do at your own initiative and are
responsible for compliance with any applicable laws, including but not limited
to applicable local laws and privacy and data collection laws. Some web pages
or videos may not be supported due to network failure, difference of regions
or service interruption, which has nothing to do with this monitor. Some
models may support apk installation by yourself, when using this feature, you
should ensure the correctness, security, compatibility and legality of the apk
and should be responsible for any obligations thus resulted in. Some models
may support installing and using file manager application by yourself, when
using this feature, you should not revise or delete a system file,
12
otherwise it will cause function failure or data loss of this monitor, and you
should be responsible for any obligations thus resulted inobligations thus
resulted in. The services and the contents are controlled by third-party
providers by means of network and transmission facilities, which are subject
to alteration, suspension, removal, termination or interruption, or invalid
access at any time without further notice in that the manufacturer is unable
to control or to be informed of the aforesaid change. We make a further
declaration that we disclaim any responsibility or liability arising from
customer’s failure to use the network application services and contents caused
by, including but not limited to, failure of network connection or
communication lines, technological updates, or the alteration, suspension,
interruption, termination, disabling, or removal of any services or contents
by the network application providers etc. 5. Content Rights We are not
responsible for the contents you may access as a part or via your use of the
services that were created by or are owned by a third party. Any
responsibility or liability for the contents shall remain solely with the
creator, owner or licensor of such third-party content, and not with us. You
understand, acknowledge and agree that the contents are protected by the
proprietary and intellectual property rights of the creator, owner or licensor
of such third-party content. You must not modify, reverse engineer, copy,
rent, lease, loan, sell, resell, re-transmit, distribute, trade, publicly
display or create derivative works of any third-party content, either in whole
or in part, without obtaining a license from the creator, owner or licensor.
The content creator, owner or licensor may use Microsoft PlayReady content
access technology (“PlayReady”) to protect their intellectual property,
including copyrighted content. This monitor uses PlayReady technology to
access PlayReady-protected Content and/or WMDRM-protected Content (“WMDRM”
means Microsoft Window Media digital rights management technology). If this
monitor fails to properly enforce restrictions on Content usage, the content
creator , owner or licensor may require Microsoft Corporation (“Microsoft”) to
revoke this monitor’s ability to consume PlayReady-protected Content.
Revocation should not affect unprotected Content or Content protected by other
content access technologies. The content creator, owner or licensor may
require you to upgrade PlayReady to access their Content. If you decline an
upgrade, you will not be able to access content that requires the upgrade. The
content creator, owner or licensor may use Widevine DRM content access
technology to protect their intellectual property, including copyrighted
content. This monitor uses Widevine DRM technology to access Wldevine DRM-
protected Content. If this monitor fails to properly enforce restrictions on
Content usage, the content creator, owner or licensor may require Widevine
Technologies (a company) to revoke this monitor’s ability to consume Widevine
DRM-protected Content. Revocation should not affect unprotected Content or
Content protected by other content access technologies. The content creator,
owner or licensor may require you to upgrade Widevine DRM to access their
Content. If you decline an upgrade, you will not be able to access content
that requires the upgrade. 6. Use by Minors If you are a parent or guardian
permitting a person under the legal age of majority (“Minor”) to use the
services or the contents, you agree to :(1) supervise the Minor’s use of the
services or the contents. (2) assume all risks associated with the Minor’s use
of the services or the contents, including receipt and transmission of
information and materials via the services, and the transactions made for
diaital aoods, the services and the contents.(3) assume any liability
resulting from the Minor’s use of the services and the contents. (4) be bound
by this EULA for the Minor’ s access and use of the services and the contents.
7. Privacy Policy We don’t collect or use any personal information by this
monitor. However, when you access the applications provided by third-party
providers over which we have no control, third parties may collect or receive
certain information through the use of Cookies or other similar technologies.
We are not responsible for the security or privacy of any information
collected by third parties. You should exercise caution and review the privacy
statements applicable to the third-party services you use. For example, but
not limited to, when you watch a video or access the services or contents
provided by a thirdparty provider. That provider may collect or receive
information about this monitor (its IP address, device identifies, etc.), the
requested transaction (your request to buy or rent the video), your use of the
services and contents, and so on. To allow you to access, browse or use the
services and the contents, third parties may require you to establish a user
account for which you must provide them with your true, accurate, current and
complete information about yourself. You are responsible for maintaining the
confidentiality of any or all of your passwords associated with any such
account. Third parties may charge fees for access to their contents or
services, and in no event will you be charged for access to any portion or all
of the contents and services unless the third-party provider obtains your
prior agreement to pay such charges. If you don’t consent to such charges, you
may not have access to paid contents or services for which such charges apply.
When you use the monitor software or access the services , third parties may
collect data from, control, and/or monitor this monitor, or other devices
running or interacting with this monitor. We are not responsible and liable
for any activities between you and third parties.
13
8. Disclaimer of Warranty THE MONITOR SOFTWARE, THE SERVICES AND THE CONTENTS
ARE PROVIDED TO YOU “AS IS” AND “AS AVAILABLE” AND WITHOUT WARRANTIES OF ANY
KIND. WE, THIRD-PARTY PROVIDERS AND THIRD-PARTY LICENSORS DISCLAIM ALL
WARRANTIES AND CONDITIONS, EXPRESS ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF NON-INFRINGEMENT, TITLE, MERCHANTABILITY, AND FITNESS
FOR A PARTICULAR PURPOSE. WE, THIRD-PARTY PROVIDERS AND THIRD-PARTY LICENSORS
DO NOT WARRANT THAT THE MONITOR SOFTWARE, THE SERVICES OR THE CONTENTS WILL
MEET YOUR REQUIREMENTS , OR THAT THE OPERATION OF THE MONITOR SOFTWARE THE
SERVICES OR THE CONTENTS WILL BE UNINTERRUPTED OR ERROR FREE. FURTHERMORE, WE,
THIRD-PARTY PROVIDERS AND THIRD-PARTY LICENSORS DO NOT WARRANT OR MAKE ANY
REPRESENTATIONS OR CONDITIONS REGARDINGTHE USE OR THE RESULTS OF THE USE OF
THE MONITOR SOFTWARE, THE SERVICES OR THE CONTENTS IN TERMS OF THEIR
CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY US SHALL CREATE A WARRANTY OR CONDITION, OR IN
ANY WAY CHANGE THIS DISCLAIMER OF WARRANTY AND CONDITION. SHOULD THE MONITOR
SOFTWARE, MEDIA ON WHICH THE MONITOR SOFTWARE IS FURNISHED, THE SERVICES OR
THE CONTENTS PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY
SERVING, REPAIR OR CORRECTION. YOU UNDERSTAND, ACKNOWLEDGE, AND AGREE THAT THE
SERVICES CONTENTS AND RELATED SOFTWARES ARE PROVIDED BY THIRD-PARTY PROVIDERS
OVER WHICH WE HAVE NO CONTROL. THE SELECTION, PROVISION, QUALITY, PICTURE SIZE
AND AVAILABILITY OF SUCH CONTENTS OR SOFTWARE ARE THE SOLE RESPONSIBILITY OF
SUCH THIRD-PARTY PROVIDER OR OTHER THIRD-PARTY PROVIDERS. YOU AGREE TO COMPLY
WITH ANY AND ALL TERMS AND CONDITIONS THAT THE THIRD-PARTY MAY SET FOR ITS
SERVICES, CONTENTS ANO SOFTWARE. YOU UNDERSTAND, ACKNOWLEDGEA, AND AGREE THAT
ANY CONTENTS OR SOFTWARE DOWNLOADED OR OTHERWISE OBTAINED THROUGH USE OF THE
SERVICES IS DONE AT YOUR OWN DISCRETION AND RISK, AND YOU SHOULD BE SOLELY
RESPONSIBLE FOR ANY CONSEQUENCES THAT RESULTS, INCLUDING ANY DAMAGE OR HARM
CAUSED BY ANY VIRUS, SPYWARE, WORM OR MALWAER. 9. Limitation of Liability TO
THE EXTENT PERMITTED BY APPLICABLE LAW , WE SHALL NOT BE LIABLE TO YOU,
WHETHER IN CONTRACT, TORT (INCLUDINGNEGLIGENCE), OR ANY THEORY OF LIABILITY,
AN WHETHER OR NOT THAT THE POSSIBILITY OF SUCH DAMAGES OR LOSSES HAS BEEN
NOTIFIED TO US, FOR THE FOLLOWING CIRCUMSTANCES : (1). ANY INDIRECT,
INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES. (2). ANY LOSS OF
INCOME, BUSINESS, ACTUAL OR ANTICIPATED PROFITS, OPPORTUNITY, GOODWILL, OR
REPUTATION (WHETHER DIRECT OR INDIRECT). (3). ANY DAMAGE TO OR CORRUPTION OF
DATA (WHETHER DIRECT OR INDIRECT). (4). ANY LOSS OR DAMAGE AS A RESULT OF: (A)
USE YOU MAKE OF THE SERVICES. (B) ANY RELIANCE PLACD BY YOU ON THE
COMPLETENESS, ACCURACY OR EXISTENCE OF ANY ADVERTISING. (C) ANY RELATIONSHIP
OR TRANSACTION BETWEEN YOU AND AN THIRD-PARTY PROVIDER OF ANY SERVICE OR
CONTENT, INCLUDING ADVERTISERS AND SPONSORS WHOSE ADVERTISING IS MADE AVAILABL
ON OR VIA THE SERVICES. (D) ANY CHANGES TO THE SERVICES, OR ANY PERMANENT OR
TEMPORARY CESSATION IN THE PROVISION OF THE SERVICES OR ANY PORTION THEREOF .
10. Dispute Resolution If a dispute, controversy or difference arising in any
way from this EULA or your use of the monitor software is not amicably
settled, it shall be subject to the non-exclusive jurisdiction of the courts
of the jurisdiction where you are a resident. Notwithstanding the foregoing,
we may apply for injunctive remedies (or an equivalent type of urgent legal
relief) that we deem necessary or appropriate in any jurisdiction. 11.
Applicable Law and Severability This EULA is governed by the laws of the
jurisdiction where you are a resident, without regard to its conflict of law
provisions. If any provision of this EULA is held to be void, invalid,
unenforceable or illegal, the other provisions shall remain in full force and
effect. 12. Termination This EULA is effective until terminated. Your rights
under this EULA will terminate automatically or otherwise cease to be
effective without notice from us if you fail to comply with any items of this
EULA. Upon termination of this EULA, you shall cease all use of the monitor
software, and you will have no recourse against us, third-party licensors or
third-party providers. 13. Entire Agreement and Governing Language This EULA
is the entire agreement between you and us relating to the monitor software
and supersedes all prior or contemporaneous oral or written communications,
proposals and representations with respect to the monitor software or any
other subject matter covered by this EULA. Any translation of this EULA is
provided only for your convenience or local requirements. The English version
of this EULA shall govern in the event of contradiction or dispute between
English and any non-English versions .
14
TROUBLE SHOOTING
Before calling a service technician, please check the following table for a
possible cause of the symptom and some solutions.
General Problem / Solution
Remote control does not work Change the batteries. Check if batteries are
installed correctly. Check if main power is connected. Check if there are some
items between remote sensor and remote control. Poor Signal This is usually
caused by interference from electronic equipments or radio interference
sources.
Picture and Sound / Solution
No picture, no sound Check the signal source. Plug another electrical device
into the outlet to check if it is working or turned on. Check if power plug is
in good contact with the outlet. No sound, picture OK If no sound, unmute the
sound or increase the volume. Open the sound menu and adjust Balance’. Abnormal picture For no color or bad picture quality, you may: 1. Adjust the color option in menu settings. 2. Keep the monitor at a sufficient distance from other electronic products. 3. Try another channel. Bad monitor signal (Display mosaic or snowflakes) 1. Check the signal cable and adjust the antenna. 2. Fine tune the channel. 3. Try another channel. Multimedia Player / Solution This file is invalid’ /`Unsupported audio’ appears , or audio is normal but
video is abnormal, or video is normal but audio is abnormal The media file
maybe damaged, check if the file can be played on the PC. Check if video and
audio codec is supported.
Network / Solution
Network failure Check if the router works well. Make sure the monitor has
connected to the router successfully.
Browser / Solution
Web page can not be displayed completely Some third-party extensions of the
current web page may not be supported, and please close the current web page.
Browser is forced to be shut down The current web page may include too many
contents which cause there isn’t sufficient memory and the browser is closed.
15
Password / Solution
If you forget the password, clear the password using the following procedure.
- From the Dashboard, select “Settings” > “System” > “About” > “Reset” >
“Factory reset”, and then press ENTER/OK. 2. When you perform a reset, the
monitor will be returned to the factory preset values, and you need to set the
password again.
NOTE 1. As a precautionary measure, make a note of your password, and keep it in a safe place.
monitor
16
Item
Model
4T-C65GU8500X
LCD panel Resolution
Video colour system
Audio amplifier
Terminals Wi-Fi Protocol
HDMI 1 HDMI 2 HDMI 3 AV IN USB USB LAN (10/100 BASE-T)
OPTICAL DIGITAL AUDIO OUT
Wi-Fi Security Bluetooth
OSD language
Power requirement
Power consumption (Standby) Dimensions without stand
W x H x D (mm)
with stand W x H x D (mm) Weight without stand (with stand) Operating
temperature
164 cm 8,294,400 pixels (3840 x 2160) PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
Total 30W (15W x 2) HDMI 4K, ALLM, eARC/ARC HDMI 4K, ALLM/VRR (120P) HDMI 4K,
ALLM/VRR (120P)
3.5 mm jack (AUDIO in, VIDEO in) USB 2.0 (DC5V 500mA output) USB 2.0 (DC5V
500mA output) Network connector
Optical S/PDIF digital audio output
IEEE 802.11 a/b/g/n/ac 2T/2R Dual Band WPA3-Personal, WPA2-Personal, WPA-
Personal V2.1 + EDR / 4.2 / 5.1 English/Simplified Chinese/Traditional
Chinese/ Portuguese/French/Spain AC 110V, 60Hz 240W (0.5W)
1450 x 844 x 73
1450 x 895 x 300
24.2 kg (29.8 kg) 0°C to + 40°C
17
Item
Model
4T-C75GU8500X
LCD panel Resolution
Video colour system Audio amplifier
Terminals
Wi-Fi Protocol Wi-Fi Security Bluetooth
HDMI 1 HDMI 2 HDMI 3 AV IN USB USB LAN (10/100 BASE-T)
OPTICAL DIGITAL AUDIO OUT
OSD language
Power requirement
Power consumption (Standby) Dimensions without stand
W x H x D (mm)
with stand W x H x D (mm) Weight without stand (with stand) Operating
temperature
189 cm 8,294,400 pixels (3840 x 2160) PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
Total 30W (15W x 2) HDMI 4K, ALLM, eARC/ARC HDMI 4K, ALLM/VRR (120P) HDMI 4K,
ALLM/VRR (120P)
3.5 mm jack (AUDIO in, VIDEO in) USB 2.0 (DC5V 500mA output) USB 2.0 (DC5V
500mA output) Network connector
Optical S/PDIF digital audio output
IEEE 802.11 a/b/g/n/ac 2T/2R Dual Band WPA3-Personal, WPA2-Personal, WPA-
Personal V2.1 + EDR / 4.2 / 5.1 English/Simplified Chinese/Traditional
Chinese/ Portuguese/French/Spain AC 110V, 60Hz 360W (0.5W)
1672 x 968 x 72
1672 x 1021 x 332
34.5 kg (42.0 kg) 0°C to + 40°C
18
Google TV is the name of this device’s software experience and a trademark of
Google LLC. Google, YouTube, Chromecast built-in are trademarks of Google LLC.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress
and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc. Dolby, Dolby Vision IQ, Dolby Vision, Dolby Atmos, Dolby
Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing
Corporation. Manufactured under license from Dolby Laboratories. Confidential
unpublished works. Copyright © 1992-2022 Dolby Laboratories. All rights
reserved. The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc.
19
RESTRICTED SUBSTANCES AND ITS CHEMICAL SYMBOLS
Equipment nameLED monitor Type designation (Type)4T-C65GU8500X / 4T-C75GU8500X
Restricted substances and its chemical symbols
Unit Lead (Pb)
Printed Circuit Board
Rear Cabinet
Panel
—
Electric Current Wires
Other Wiring Material —
Mercury (Hg)
Cadmium (Cd)
Hexavalent chromium
(Cr +6)
Polybrominated Polybrominated
biphenyls diphenyl ethers
(PBB)
(PBDE)
Acceseories (Example
Remote control etc. ) —
Note “Exceeding . wt %” and “exceeding . wt %” indicate that the percentage
content of the restricted substance exceeds the reference percentage value of
presence condition.
Note “” indicates that the percentage content of the restricted substance does
not exceed the percentage of reference value of presence.
Note The “-” indicates that the restricted substance corresponds to the
exemption.
20
SHARP CORPORATION
4T-C65GU8500X 4T-C75GU8500X
https://global.sharp/restricted/support/aquos/emanual/asia/pdf/gu/android11/Index.html
…………………………………………………………………………………………………………………………..1
…………………………………………………………………………………………………………..4
……………………………………………………………………………………………………………………….. 7
……………………………………………………………………………………………………………………….. 8
…………………………………………………………………………………………………………………….9
……………………………………………………………………………………………………………………….. 10
………………………………………………………………………………………………11
…………………………………………………………………………………………………………………….12
…………………………………………………………………………………………………….13
…………………………………………………………………………………………………………………….16
…………………………………………………………………………………………………………………………..18
…………………………………………………………………………………………………………………………..20
…………………………………………………………………………………………………. 21
3010 221
1). 2). 3). 4).
1. 2. 3. 4.
2
,
x2
1. /
Quick Start Guide For Stand
x4 x6
4T-C75GU8500X 4T-C65GU8500X
TR/TL
TR/TL 2.
1
4T-C75GU8500X 4T-C65GU8500X
TR/TL
. . ./ (TR/TL)
2
4T-C75GU8500X 4T-C65GU8500X
TR/TL
./TL/TR
./ (TL/TR)
.
· · 5. ./ (TL/TR)
.
· 3
3
· · —
· —
· · —
· · — / · · — · · · · 99.99% 0.01%
·
RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.
SHARP
·
I
· I
— · · AC INPUT
·
· · 1m
0800-085-717
NCC3.8.2: – – –
4
10
/
– – – – – – – – –
SHARP SHARP
10
10 (4 )
10
10
0°~5°
(0°~5°)SHARP
5
/
10mm
8mm 18mm
10mm
E
D
1. 2. 10mm 8mm
BACKHOME
6
7
895
:mm 4T-C65GU8500X
1450 1429
448
4T-C75GU8500X
1672 1651
551
929
804
958
834
475
500
475
48
355
300
61 179
300
536
600
536
48
420
400
332
1021
63 138
8
1). 2). 3).
USB
USB
USB
DVD
STB
USD
HDMI
HDMI
HDMI
/ DVD
9
1). 2).MIC 3).
1. ( )
2. ( )
1
2 4.
3
· Daily Key
· Daily Key
4 *
5 7
REVEAL
INDEX
HOLD
TEXT
6 ·
· Daily Key
8 5 6
· TEXT
9
10 · REVEAL
· INDEX 12 · HOLD
11
· / ( )
· ( )
· ( )
13
14 8. MIC( )
15
· MIC
17
16 · MIC MIC
18
9. ( ) Google 19
10. ( ) Google
20 11. /// ( / / / )
· UP/DOWN/
12. OK
21
13. ( )
14. ( )
22
AD
23 15. ( )
16. / ( ) 24 17. EXIT
18. / (VOL +/-)
19. / (P / )
20. FAV
21. (0~9)
22. INFO INFO
23. AD
24. (R/G/Y/B)
10
1). 2).
1. ( )
12 3 4
5
4
6
- 3. / /
4. 3 5. * 6. Google Ok GoogleHey Google
Google / / https://support.google.com/assistant
No thanksYes, I’m in 1.ACCOUNT( )Manage accounts>Google AssistantGoogle > Hands-free MIC 2.Hands-free MIC 3.Ok GoogleHey GoogleYes, I’m in
11
1
5
2
2. MIC
MIC
Google MIC
Bluetooth®
MIC Initial SettingsSettings Settings 1.Dashboard < > Remotes & Accessories
Pair accessory 2.BACKHOME 3.OK 4.Paired
. . . (-)
Recycle the battery
3
12
1. EULA 2. EULA (1) (2) EULA GPL LGPL / MPL GPL2.0/LGPL2.1/MPL1.1 (3) 3. 4.
APK (Android Package) APK
13
5. Microsoft PlayReady PlayReady PlayReady PlayReady / WMDRM WMDRM Microsoft
Window Media Microsoft CorporationMicrosoft PlayReady PlayReady DRM Widevine
DRM Widevine DRM Widevine Technologies Widevine DRM Widevine DRM 6. (1) (2)
(3) (4) EULA 7. Cookie IP /
14
8. 9. (1). (2). (3). (4). () 10. EULA 11. EULA EULA 12. EULA EULA EULA EULA
13. EULA EULA EULA EULA
15
/
/
1. 2. 3. 1. 2. 3.
/
This file is invalid/Unsupported audio
/
/
16
/
1. Settings>System>About>Reset>Factory reset ENTER/OK 2.
- 1. 2. 3. OSD USB
17
HDMI 1 HDMI 2 HDMI 3 AV IN USB USB LAN (10/100 BASE-T)
Wi-Fi Wi-Fi OSD
W x H x D (mm)
x x
4T-C65GU8500X
164 cm 8,294,400 (3840 x 2160) PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 30W (15W x
2) HDMI 4KALLMeARC/ARC HDMI 4KALLM/VRR (120P) HDMI 4KALLM/VRR (120P) Ø 3.5mm
USB 2.0DC5V 500mA USB 2.0DC5V 500mA S/PDIF
IEEE 802.11 a/b/g/n/ac 2T/2R WPA3-PersonalWPA2-PersonalWPA-Personal V2.1 + EDR
/ 4.2 / 5.1 /////
AC 110V, 60 Hz 240W (0.5W)
1450 x 844 x 73
1450 x 895 x 300
24.2 kg (29.8 kg) 0°C to + 40°C 480i, 480p, 720p, 1080i, 1080p, 2160p
18
HDMI 1 HDMI 2 HDMI 3 AV IN USB USB LAN (10/100 BASE-T)
Wi-Fi Wi-Fi OSD
W x H x D (mm)
x x
4T-C75GU8500X
189 cm 8,294,400 (3840 x 2160) PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 30W (15W x
2) HDMI 4KALLMeARC/ARC HDMI 4KALLM/VRR (120P) HDMI 4KALLM/VRR (120P) Ø 3.5mm
USB 2.0DC5V 500mA USB 2.0DC5V 500mA S/PDIF
IEEE 802.11 a/b/g/n/ac 2T/2R WPA3-PersonalWPA2-PersonalWPA-Personal V2.1 + EDR
/ 4.2 / 5.1 /////
AC 110V, 60 Hz 360W (0.5W)
1672 x 968 x 72
1672 x 1021 x 332
34.5 kg (42.0 kg) 0°C + 40°C 480i, 480p, 720p, 1080i, 1080p, 2160p
19
HDMIHDMI High-Definition Multimedia InterfaceHDMI HDMI HDMI Licensing
Administrator, Inc. DolbyDolby Vision IQDolby VisionDolby AtmosDolby Audio
double-D Dolby Laboratories Licensing Corporation Dolby Laboratories Copyright
© 1992-2022 Dolby Laboratories
20
4T-C65GU8500X / 4T-C75GU8500X
(Pb)
(Hg)
(Cd)
(Cr+6)
(PBB)
—
—
(:)
—
(PBDE)
1 0.1 0.01
2 3
21
SHARP CORPORATION
: : 167
: 0809-090-510
,
: 0809-090-510
: 09:00~21:00
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>