RadiusShop MP10200S 7.5 inch Wheel Rollator Bariatric User Manual
- September 25, 2024
- RadiusShop
Table of Contents
RadiusShop MP10200S 7.5 inch Wheel Rollator Bariatric User Manual
Parts of the product
Specification of the product
Product
dimension
| Product dimension
folded
| Handle height
adjustment
| Weight
Capacity
| ****
Seat Height
| Seat
Dimensions
| Backrest
Height
| Wheel
diameter
---|---|---|---|---|---|---|---
6807381020mm| 755225900mm| 823-1020mm| 500 LBS| 550mm| 550*380mm| 828mm|
7.5 inch
Installation the product
Assemble handles and height adjustment The rollator is delivered largely
pre-assembled remove the lever from the frame, insert the handles into the
tube on the frame position of the handles at the desired height.
The handles are correctly adjusted when you are at the same height as your
wrists, fix the height by inserting the lever and tighten it, and make sure
that both handles are at the same height.
Assemble the shopping basket
Folding the seat forward, hang the hooks of the shopping basket in the frame, and Do not transport too heavy loads (Maximum weight for the basket is 5kg).
Assemble the backrest
The backrest should only be installed when the rollator is in a safe position and the brakes are activated for the backrest, proceed in reverse order.
Parking brakes
To apply the parking brake, press the brake lever down. To release it, apply
the brake as usual.
Caution! Never apply the parking brake while in motion.
To reduce walking speed, use the lever on the handle
To do this, pull the handle upwards towards you with your fingers.
Folding rollator
To transport or store your rollator to save space, you can fold it up and fold the seat up. Take out the shopping basket and pull up the cross braces, the rollator will fold up.
Unfold rollator
Position your rollator in front of you and apply the brakes.
The rollator unfolds by gently pressing the handles Press the cross brace down
and fold the seat surface down.