arten Multi 120 16W Push Button Dimmable Lamp Instruction Manual
- September 24, 2024
- ARTEN
Table of Contents
arten Multi 120 16W Push Button Dimmable Lamp
IMPORTANT SAFETY INSTRUCTIONS
- Read all instructions.
- Licensed electrician for installation only
- Always ensure the power is OFF and the fitting has cooled down before performing any maintenance, cleaning, changing the globe or adjustment to the fitting.
- Do not install any luminaire near the heat source and ensure the product has enough space for heat dissipation.
- Do not exceed the nominal supply voltage or amperage ratings.
- To avoid injury or damage to the fitting, please ensure that power leads and screws are secure before connecting power.
- Please refer to IP-rating of luminaire when deciding the location of installation.
- Storage Conditions: Cool & dry conditions.
DIMENSION
INSTALLATION INSTRUCTIONS
For color changeable model (controlled by slide switch in lamp) please select light color before installation, see picture.
The ARIAL luminaire is available with the following controls:
- ON/OFF
- TRIAC
- DALI
- PUSH DIM
This product ARIAL Multi 120 contains a light source of energy efficiency class D.
This product ARIAL Multi 150 contains a light source of energy efficiency class C.
You can directly choose the power from the luminaire before installation.
ARIAL Multi 120
- 6W – 1920lm
- 18W – 2160lm
- 20W – 2400lm
- 22W – 2640lm
- 24W – 2880lm
- 26W – 3120lm
- 28W – 3360lm
- 30W – 3600lm
- 32W – 3840lm
- 34W – 4080lm
- 36W – 4320lm
ARIAL Multi 150
- 16W – 2400lm
- 18W – 2700lm
- 20W – 3000lm
- 22W – 3300lm
- 24W – 3600lm
- 26W – 3900lm
- 28W – 4200lm
- 30W – 4500lm
- 32W – 4800lm
- 34W – 5100lm
- 36W – 5400lm
Synchronisation of PUSH DIM drivers:
Press and hold the button until all lights are ON. The press should be >15 seconds. Then switch all lights OFF with a short press. This will bring all lights back into synchronisation again.
CUSTOMER SUPPORT
Arten Oy – info@arten.fi – www.arten.fi