Maxsun MS-Challenger B760ITX D5 8 Pin plus 12V CPU Power Connector and 24 Pin Motherboard Owner’s Manual

MS-Challenger B760ITX D5 8 Pin plus 12V CPU Power Connector and 24 Pin

Motherboard

Specifications

1.1 Motherboard Hardware Specifications

• Motherboard: Mini-ITX (170*170mm)

• CPU: Supports LGA1700 slot, 8+1 phase power supply; TDP: PL1
  168W; PL2 241W

• RAM: 2* DIMM DDR5 memory slots, Maximum capacity 96GB, Supports
  dual-channel memory technology, Supports 4800Mhz/XMP/OC memory
  frequencies

• Display: Shared display memory technology, 2 DP1.4 display
  ports, 1 HDMI 2.0 display interface, 1 HDMI 1.4 display
  interface, Extended 1 PCIEX16 5.0 slot

• Interface: Supports AMD and NVidia discrete graphics cards

• Audio: Integrated REALTEK ALC897 HD Audio Codec

• Network: 1 Realtek RTL8125BG 2.5G LAN, 1 INTEL i219V 1Gb
  LAN

• SSD: 1x M.2_SSD_A Front Socket M.2 slot, 1x M.2_SSD_B backside
  slot, 4x SATA 3.0 ports

• USB: Onboard USB pins (5 ports total), Rear USB ports (6 ports
  in total)

• In-board sockets: Various pins for system fan, CPU fan, front
  control panel, front audio, TPM_SPI, Debug, CASE_OPEN, SPDIF,
  5V_ARGB

• Power Hardware monitoring: Voltage monitoring, Temperature
  monitoring, Fan monitoring, Intelligent fan speed control

• Operating system: Support Windows 10 64bit, Windows 11
  64bit

1.2 Motherboard I/O Interface Function Description

• A: DP port DP1.4 port, supports up to 4096×2160@60Hz
  resolution, for connecting to DP monitor port.

• B: DP port DP1.4 port, supports up to 4096×2160@60Hz
  resolution, for connecting to DP monitor port.

• C: HDMI port HDMI 2.0 port, supports up to 4096×2160 @60Hz
  resolution for connecting to HDMI monitor ports.

Product Usage Instructions

Installation Guidelines:

1. Ensure a minimum distance of 20cm between the radiator of the
   equipment and your body.

2. Properly install the CPU in the LGA1700 slot.

3. Insert the RAM modules correctly into the DIMM DDR5 memory
   slots.

4. Connect the necessary power cables to the motherboard.

5. Install any additional hardware components as needed.

Connection Setup:

1. Connect the display monitors to the designated DP and HDMI
   ports based on desired resolutions.

2. If using discrete graphics cards, ensure proper installation
   and connection.

3. Connect audio devices to the integrated HD Audio Codec.

4. Establish network connections using the LAN ports.

5. Add storage devices to the available M.2 and SATA slots.

Peripheral Connections:

1. Connect USB devices to the onboard and rear USB ports for data
   transfer.

2. Utilize the various in-board sockets for fan control, audio
   connections, power monitoring, and more.

Frequently Asked Questions (FAQ)

Q: Can this motherboard support more than one graphics

card?

A: Yes, this motherboard supports both AMD and NVidia discrete
graphics cards for multiple GPU configurations.

Q: What is the maximum RAM capacity supported by this

motherboard?

A: The motherboard supports a maximum RAM capacity of 96GB
across two DIMM DDR5 memory slots.

MS-Challenger B760ITX D5
Manual
VER:A0
Edited on February 28, 2024 Editing Department: Technology Department
1/5

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
2/5

Specifications

1.1. Motherboard hardware specifications

Motherboard Mini-ITX(170*170mm)

Size

CPU

Supports LGA1700 slot

Intel® 14th, 13th, 12th Processors

8+1 phase power supply; TDP: PL1 168W; PL2 241W

Chipset

Intel® B760 High Speed Chipset

RAM

2* DIMM DDR5 memory slots

Maximum capacity 96GB

Supports dual-channel memory technology

Supports 4800Mhz/XMP/OC memory frequencies

Display

Shared display memory technology based on display capabilities with integrated graphics

processor

2* DP1.4 display ports supporting up to 4096×2160@60Hz resolution

1* HDMI 2.0 display interface, support up to 4096×2160@60Hz resolution

1* HDMI 1.4 display interface, support up to 4096×2160@30Hz resolution

Extended 1* PCIEX16 5.0 slot

Interface

Supports AMD and NVidia discrete graphics cards

Audio

Integrated REALTEK ALC897 HD Audio Codec

Network

1* Realtek RTL8125BG 2.5G LAN

1* INTEL i219V 1Gb LAN

1* M.2_WIFI slot (KEY_E): supports PCIE×1/CNVio2/USB channel for installing wireless

SSD

1x M.2_SSD_A Front Socket M.2 slot with Gen4 x4 support

1x M.2_SSD_B backside slot M.2 slot with Gen4 x4 support

4x SATA 3.0 ports

USB

Onboard USB pins (5 ports total):

1* USB3.2 Gen2 Type-C (10G) front port

1* USB3.2 Gen1 (5G) connector pin, supports 2 additional USB3.2 Gen1 ports

1* USB 2.0 connector pin to support 2 additional USB 2.0 ports

Rear USB ports (6 ports in total):

2* USB3.2 Gen1 Type-A (5G) ports

4* USB2.0 Type-A ports

In-board

1* COM pin

sockets

3* sets of system fan pins, 1 set of CPU fan pins

1* set of chassis front control panel pins (F_PANEL)

1* set of front audio pins F_Audio

1* set of TPM_SPI pins, support external TPM2.0 module or SPI burn-in function (BIOS

burn-in)

1* set of Debug pins

1* set of CASE_OPEN pins

3/5

Power Hardware monitoring
Operating system ESD protection
Package

1 set of SPDIF pins
1 set of 5V_ARGB pins
1 24-PIN motherboard ATX power
1 8-PIN motherboard ATX power
Voltage monitoring
Temperature monitoring
Fan monitoring
Intelligent fan speed control (supported by the motherboard, intelligent fan speed control also
requires fan support)
Support Windows 10 64bit, Windows 11 64bit
Ubuntu 64bit support Air discharge ± 8KV Class C
±6KV Class B Contact discharge ± 6KV Class C
± 3KV Class B Tested with the whole machine well grounded Single piece packaging weight:736.2g Packing quantity: 20PCS Outer box size:505(L)mm425(W)mm*337(H)mm Full box gross weight16.8kg

1.2 Motherboard I/O interface function description

A: DP port DP1.4 port, supports up to 4096×2160@60Hz resolution, for connecting to DP monitor port.
B: DP port DP1.4 port, supports up to 4096×2160@60Hz resolution, for connecting to DP monitor port.
C: HDMI port HDMI 2.0 port, supports up to 4096×2160 @60Hz resolution for connecting to HDMI monitor ports.
D: HDMI port HDMI 1.4 port, supports up to 4096×2160 @30Hz resolution for connecting to HDMI monitor ports.
4/5

E: 2-layer USB 2.0 interface Supports up to 480Mb theoretical transfer speed and is backward compatible with USB1.1 standard for
connecting USB TYPE A devices. F: Audio
Audio-in connector (blue) for receiving audio input devices, such as cell phone audio input. Audio-out connector (light green) for accessing audio output devices, such as headphones, speakers and other external amplification devices. Audio-Microphone connector (pink) for accessing audio input devices such as microphones and other radio devices. G: Intel 1Gb LAN Network cable interface for accessing the network cable to connect the host system to the network.
H: Realtek 2.5Gb LAN Network cable interface for accessing the network cable to connect the host system to the network.
I: 2-layer USB 2.0 interface Supports up to 480Mb theoretical transfer speed and is backward compatible with USB1.1 standard for
connecting USB TYPE A devices. J: Layer 2 USB3.2 GEN1 Type-A connector
Supports up to 5Gb theoretical transfer speed and is backward compatible with USB 1.1 standard for connecting USB TYPE A devices. K: CLR_CMOS shortcut button.
5/5

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>