THE ORIGINAL GRANITE BRACKET B07KPNCXMF 49 Inch Double Island Support Bracket Installation Guide
- September 24, 2024
- THE ORIGINAL GRANITE BRACKET
Table of Contents
THE ORIGINAL GRANITE BRACKET B07KPNCXMF 49 Inch Double Island Support
Bracket
Product Information
Specifications:
- Product Name: Double-Sided Island Countertop Support Bracket
- Designed for: Countertops with overhang on both sides of the cabinet
- Manufacturer: Original Granite Bracket
- Contact: 888-584-1112
Product Usage Instructions
Safety Instructions:
- Use the correct tools.
- Wear safety goggles & proper safety equipment.
- Follow fixtures, power tools & paint manufacturers’ instructions & user manuals.
- Use common sense & follow good construction practices.
- Consult a professional when installing brackets for load-bearing applications.
- Ensure the bracket has a substructure capable of supporting it & any additional weight.
- When in doubt, consult a professional installer.
Installation Steps:
-
Step #1: Installation Guide:
Measure 3-6 inches from the outer edge of the cabinet to place the first bracket. Then place brackets every 16-20 inches apart for countertop protection. -
Step #2:
Rout or chisel a 2.5-inch wide by 0.5-inch deep section at the top of the cabinet on both sides. This pocket will allow the Double Sided Island Bracket to sit flush with the top of the cabinet.
NOTE: The bracket must be flush with the cabinet for the countertop to sit level & to protect it. -
Step #3:
Once the pocket is made in the cabinet, simply insert the Double Sided Island Support Bracket. -
Step #4:
Using a level, ensure your brackets are level; use shims where necessary until the brackets are completely level. -
Step #5:
Place your countertop on top of the cabinet & brackets. -
Step #6:
Check again that the countertop is level. Once level, caulk around the brackets with clear silicone to hold your countertop securely in place.
Frequently Asked Questions (FAQ):
-
Q: Can this bracket be used for heavy stone countertops?
A: It is recommended to consult with a professional to ensure the bracket can support heavy stone countertops effectively. -
Q: Can I install this bracket on my own?
A: While DIY installation is possible, consulting a professional installer is recommended, especially for load-bearing applications.
The Double Sided Island Support Bracket is a hidden countertop support bracket designed to give support to a countertop that has an overhang on both sides of the cabinet.
WATCH OURINSTALLATION VIDEO
https://originalgranitebracket.com/pages/installation-videos.
SAFETY INSTRUCTIONS
- Use the correct tools.
- Wear safety goggles& proper safety equipment.
- Follow fixtures, power tools & paint manufacturers’ instructions& user manuals.
- Use common sense & follow good construction practices.
- Consult a professional when installing brackets for load-bearing applications.
- Be sure the bracket has a substructure that can support the bracket & any other additional weight that may be added to it.
- When in doubt, consult a professional installer.
Installat ion Guide
-
Step #1:
Measure 3″-6″ from the outer edge of the cabinet to place the first bracket. Then place brackets every 16″-20″ apart for countertop protection. -
Step #2:
Rout or chisel a 2.5″ wide by 0.5″ deep section at the top of the cabinet on both sides. This “pocket” will allow theDoubleSided Island Bracket to sit flush with the top of the cabinet.- NOTE: The bracket must be flush with the cabinet for the countertop to sit level and protect the countertop.
-
Step #3:
Once the “pocket” is made in the cabinet, simply insert the Double Sided Island Support Bracket. -
Step #4:
Using a level, make sure your brackets are level; use shims where necessary until the brackets are completely level. -
Step #5:
Place your countertop on top of the cabinet & brackets. -
Step #6:
Check once again, that the countertop is level. Once level, caulk around the brackets with clear silicone to hold your countertop securely in place.