FEUR2024 Ultra Low Noise Mic/Line/USB Mixer

Product Information

Specifications

• Model: Ultra low noise 8,12,16,24 Channel Mic/Line/USB
  Mixer

• Channels: 8, 12, 16, 24

• Input: Mic/Line/USB

• Noise Level: Ultra low noise

Product Usage Instructions

A. Mono Input Channel Section

Use this section to connect your microphones or line-level
instruments to the mixer. Adjust the gain and EQ settings for each
channel as needed.

B. Master Section

Control the overall output level of the mixer using the master
section. Adjust the main volume and monitor levels here.

C. Effect Section

Apply built-in effects to your audio signals using this section.
Adjust parameters such as reverb, delay, and chorus to enhance your
sound.

D. MP3 Player Section

Connect your MP3 player or other audio sources to play music
through the mixer. Use the controls to adjust playback volume and
EQ settings.

E. Mixer Output Section

Connect your mixer to external speakers or recording devices
using the output section. Adjust output levels and monitor signals
here.

F. Rear View Section

Refer to the rear view section for information on input/output
ports, power connections, and any additional features located at
the back of the mixer.

G. Installation

Follow the installation instructions provided in the manual to
set up the mixer in your desired location securely.

H. Connections

Learn how to make proper connections between your audio sources,
microphones, instruments, and external devices using the mixer’s
various input and output ports.

I. Appendix

Refer to the appendix for additional information,
troubleshooting tips, and advanced usage guidelines for the
mixer.

FAQ

Q: How do I adjust the EQ settings on a specific channel?

A: To adjust the EQ settings on a specific channel, locate the
dedicated EQ controls for that channel on the mixer. You can
typically adjust parameters such as bass, midrange, and treble to
tailor the sound to your preference.

Q: Can I connect a guitar directly to this mixer?

A: Yes, you can connect a guitar to this mixer using a suitable
cable. Make sure to select the appropriate input (mic/line) and
adjust the gain accordingly to achieve optimal signal levels.

CONTENTS

A.MONO INPUT CHANNEL SECTION B.MASTER SECTION C.EFFECT SECTION D.MP3 PLAYER SECTION E.MIXER OUTPUT SECTION F.REAR VIEW SECTION G.INSTALLATION H.CONNECTIONS I. APPENDIX
Ultra low noise 8,12,16,24 Channel Mic/Line/USB Mixer
8,12,16,24 Mono Input Channels with XLR and Un/Balanced Line,INSERT Inputs 2/4 groups with INSERT jack 2/3/4 Aux Send per channel for external effects and monitoring AUX1-2 equip with Pre/Post fader switch(Optional function with difference model) Foot switch jack,Monitor jack,CD/TAPE input and output Low Cut switch on each channel. Effect send to AUX with individual volume control knobs(Optional function) Long LED Light with switch(Optional function with difference model) Mp3 player with LCD,recording and Bluetooth.(Optional function with difference model) +48V Phantom Power with main switch Uitra- musical 4-band EQ on all channels Peak LEDs on all Channels, Built in 200 kinds DSP effect processorwith LCDdislay. 4 Highly accurate 10 segment Bargraph Meters for GROUP and MAIN L/R outputs Built-in switching power supply.(External adapter is optional with difference model)

1-2
3
4-6
7
8
9
9
10-11
12

SAFETY

INSTRUCTIONS

CAUTION:To reduce the risk of electrical shock,do not remove the cover (or back).No user serviceable parts inside; refer servicing toqualified personnel.

WARNING:To reduce the risk of fire or electricalshock,do not expose this appliance to rain or moisture.

This symbol,wherever it appears,alerts you to the presence of uninsulated dangerous voltage inside the enclosure -voltage that may be sufficient
to constitute a risk of shock.

CAUTION
RISK OF ELECTRIC SHOCK D0 NOT OPEN
This symbol,wherever it appears,alerts you to important operating and maintenance instructions in the accompanying literature.Read the manual.

–

FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>