watchgas PDM PRO CO2 Sustainable Single Gas Detector Owner’s Manual

watchgas PDM PRO CO2 Sustainable Single Gas Detector

Product Specifications

• Size: Compact
• Weight: Lightweight
• Sensor Technology: NDIR sensor
• Temperature: Operating range
• Humidity: Operating range
• Alarm Type: High Alarm, Low Alarm, TWA Alarm, STEL Alarm, Over range Alarm, Battery low warning, Calibration due warning
• Alarm Signal: Acoustic: 90dB @ 10cm, Visual: Red flashing LED’s, Vibration alarm
• Display: LCD Display
• Calibration: Manual 2-point calibration
• Data Log: Stores up to 64000 data points
• Event Log: Stores 30 most recent events (overwriting)
• Operating Time: 14 days
• Battery Charging Time: 100 minutes
• Measuring Range: 0-5%vol CO2 or 0-50000ppm CO2
• Sensor Resolution: 0.01 vol% or 100 ppm
• Housing: Rubber enclosed polycarbonate
• IP-Rating: IP67
• Response Time T90: 60 seconds
• EMI/RFI: EMC directive (2014/30/EU)
• Sensor Life: 5 years (expected)
• Safety Certifications: ATEX: Non-ATEX CE: 2014/30/EU RoHS 2
• Warranty: 24 Months factory warranty
• Included Accessories: Calibration Cap, USB-C charger (Usable worldwide), User Manual, Factory calibration certificate

Product Usage Instructions

Wearing and Securing the Detector
The PDM PRO CO2 is designed to be easy to wear. It comes with a strong metal clip that allows you to secure it to your shirt, belt, or helmet for convenience.

Data Logging and Calibration
The detector features fully-fledged data logging capabilities where readings are stored at one-minute intervals for future reference. It is also easy to manually bump test and calibrate the device for accurate results.

Charging and Battery Life
The PDM PRO CO2 has a battery life of up to 14 days and can be fully recharged in just 100 minutes. Make sure to utilize the included USB-C charger for efficient charging.

Alarm Signals and Display
The detector provides various alarm types including High Alarm, Low Alarm, TWA Alarm, STEL Alarm, Over range Alarm, Battery low warning, and Calibration due warning. These alarms are indicated through acoustic signals, visual cues like red flashing LEDs, and vibration alerts.

Maintenance and Sensor Life
The detector’s sensor life is expected to be around 5 years. Regular maintenance includes manual two-point calibration and ensuring proper storage and handling to maximize sensor performance.

Frequently Asked Questions (FAQ)

• How often should I calibrate the PDM PRO CO2?
  It is recommended to perform a manual two-point calibration regularly to ensure accurate readings. The frequency of calibration may vary based on usage and environmental conditions.

• Can I replace the battery and sensor of the PDM PRO CO2?
  Yes, the PDM PRO CO2 features a replaceable battery and sensor, allowing for easy maintenance and extended product lifespan.

• What is the measuring range of the PDM PRO CO2?
  The detector can measure CO2 concentrations in the range of 0-5%vol or 0-50000ppm CO2 with high resolution for precise monitoring.

KEY FEATURES

• Rugged, durable, impact-proof housing
• 14 days of battery life, full recharge in 100 minutes
• Event log that stores 30 most recent events
• Data log with a capacity of up to 64,000 data points
• Replaceable battery and sensor

APPLICATION EXAMPLES

• Food and beverage industries
• Laboratories
• Health Science
• Refrigeration
• Packaging industry
• Replaceable battery and sensor

INTRODUCTION

• The PDM PRO CO2 is a single gas sustainable gas monitor designed to detect Carbon Dioxide (CO2) in the ambient environment. The PDM PRO CO2 is sustainable, hence its battery and sensor can be replaced. When the device is turned on, the PDM PRO CO2 continuously monitors ambient air for the presence of CO2 and alerts the user to potentially unsafe exposure with LED, vibrating and audible alarms. After use the instrument can be turned off. With an excellent battery life of 14 days and a recharge time of only 100 minutes, the PDM PRO CO2 offers great versatility for any user.
• The PDM PRO CO2 is easy to wear. It is fitted with a strong metal clip to conveniently se-cure it to a shirt, belt or helmet. The fully-fledged data logging means readings are stored at one-minute intervals for future reference. The PDM PRO CO2 is easy to manually bump test and calibrate.

DETECTOR SPECIFICATIONS

Alarm, Battery low warning, Calibration due warning

ALARM SIGNAL

| Acoustic: 90dB @ 10cm Visual: Red flashing LED’s Vibration: Vibration alarm
DISPLAY| LCD Display
CALIBRATION| Manual 2-point calibration
DATALOG| Stores up to 64000 datapoints
EVENT LOG| 30 Most recent events (overwriting)
OPERATING TIME| 14 days
BATTERY CHARGING TIME| 100 minutes
MEASURING RANGE| 0-5%vol CO2 or 0-50000ppm CO2
SENSOR RESOLUTION| 0.01 vol% or 100 ppm
HOUSING| Rubber enclosed polycarbonate
IP-RATING| IP67
RESPONSE TIME T90| ≤ 60sec
EMI/RFI| EMC directive (2014/30/EU)
SENSOR LIFE| 5 years (expected)
SAFETY CERTIFICATIONS| ATEX: Non-ATEX

CE: 2014/30/EU RoHS 2

WARRANTY| 24 Months factory warranty

INCLUDED ACCESSORIES

| Calibration Cap

USB-C charger (Usable worldwide) User Manual

Factory calibration certificate

SENSOR SPECIFICATIONS

SENSOR

| DETECTABLE GAS RANGES|

RESOLUTION

|

ARTICLE NUMBER

---|---|---|---
WatchGas PDM Pro CO2 NDIR sensor| 0-5% vol CO2

0-50000 ppm CO2

| 0.01 %vol 100 ppm|

7192008

ORDER INFORMATION FOR ACCESORIES

ACCESSORIES

The PDM PRO CO2 comes complete with the following items:

• Calibration adapter
• Manual

FOR MORE INFORMATION

• www.watchgas.com
• info@watchgas.com

ABOUT COMPANY

• WatchGas
• Klaverbaan 121
• 2908 KD Capelle aan den IJssel
• The Netherlands
• www.watchgas.com
• info@watchgas.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>