Atlantik Elektronik LD230EKS-FPN4 23 Inch Interactive Smart Shelf Screen User Manual
- September 21, 2024
- Atlantik Elektronik
Table of Contents
LD230EKS-FPN4 23 Inch Interactive Smart Shelf Screen
“`html
Product Information:
Specifications:
- Product Name: 23-inch Interactive Smart Shelf Screen (ISS)
- Version: Ver.1.0
- Model: LD230EKS-FPN4 CMMI ID
Product Usage Instructions:
1. Pre-installation Instructions:
Before opening the product packaging, inspect the packaging box
and install it on a flat surface near a wall with an outlet. Follow
these steps:
-
Open the box according to the direction of the arrow.
-
Remove the cushioning material from the top surface.
-
Take the products out one by one from the second layer.
-
When transporting the product, secure it with both hands and
avoid pressure on the screen. -
Place the product on a flat surface with the front of the
screen facing downwards.
2. Installation Precautions:
Install the product on the wall according to the instructions to
avoid damage. Ensure:
- No obstacles obstruct the product’s input terminal.
- Sufficient space is secured before installation.
- No objects are on top of the wireless antenna.
- Use three M3x6mm screws to securely fix the mounting base to
the product.
Frequently Asked Questions (FAQ):
Q: What should I do if the product does not operate
normally?
A: If the product does not operate normally even after following
the instructions, please contact the service center for
assistance.
Q: Can I use a wall mount bracket with this product?
A: Yes, a wall mount bracket is available for separate purchase
and can be easily installed for vertical or horizontal installation
of the product.
“`
23-inch Interactive Smart Shelf Screen (ISS)
Version Ver.1.0
Change history
Date January 23, 2024
Page /
Description First issued
Model: LD230EKS-FPN4 CMMI ID :
Product User Manual (V1.0)
Before using the product, please read the instruction manual in detail.
(Hereinafter, this product will be referred to as ISS.)
Table of Contents
1. Key Safety Points …………………………………………… 2 2. Components ………………………………………………… 2
3. Pre-installation considerations ……………………………3 4. Installation Precautions
…………………………………… 3 5. Product Description ………………………………………… 4 6. External Device
Connection ……………………………… 5 7. System Description ………………………………………… 6 8. FCC
Warning ………………………………………………… 9 9. Environmental Hazardous Substances (RoHS)
…………9 Appendix 1 …………………………………………………………10 Appendix 2 …………………………………………………………11
1. Key Safety Information
·Before using this product, please read the instructions ca refully and keep
the manual well.
·Before using the product, please read the instructions th oroughly and
familiarize yourself with the operating proce dures. Failure to follow the
operating procedures may res ult in injury to the user or others and property
damage.
·Do not use the product in places close to water or install it in high-
temperature environments.
·Do not place the product in environments exposed to dir ect sunlight or
install it near heating devices or open flam es. (For example: radiators,
electric heaters, gas ranges, etc.)
·Ensure that there is sufficient ventilating space of about 10cm around the
product to allow normal operation and h eat dissipation, and to prevent
overheating.
·Please do not place the product on vibrating or shaky sh elves or on unstable
places such as tables, moving carts, etc. People may get injured or even die.
And the product may fall and be severely damaged.
·When installing the product, ensure there is enough spa ce to connect the
power cable to the outlet so that it will n ot be stepped on or pressed.
·Do not connect multiple products or other electronic devi ces to a single
outlet at the same time.
·Do not use unapproved power cables or other devices b y connecting them to
the product.
·Use products from designated parts suppliers only.
·Clean with a dry cloth, and turn off the power of the prod uct before
cleaning.
·Store this product and packaging materials such as EPE air caps and
protective panels out of the reach of children.
·Do not attempt to repair or disassemble the product your self. If you
disassemble the product, there is a risk of elec tric shock or other hazards.
Ignoring this warning could re sult in death or serious injury. Seek
assistance from the s eller or service center.
Warning: When using a Class 1 adapter, connect it to a grounded power outlet.
If it does not operate normally even after following the inst ructions in this
manual, please contact the service center.
2. Components
Check the product packaging box and if there are any mis sing items, please
inquire the store where you purchased it. The actual product may differ from
the images.
ISS x 6 units
1
2
3. Pre-installation Instructions
Opening the packaging box
Before opening the product packaging, inspect the packaging box and install it
on a flat surface near a wall with an outlet. Place the product packaging box
with the side that has the arrow mark facing upwards.
1. Open the box Order according to the
direction of the arrow.
2. The top surface of the opened box is as follows.
3. Remove the cushioning material from the top surface.
4. Take the products out one by one from the second layer.
5. Remove the c from the product.
Picture
Carry
When transporting the product, be sure to secure it with both hands. When holding the product, do not apply pressure to the screen. Avoid applying force or using sharp and pointed objects on the screen.
Put
When placing the product, make sure the front of the screen faces downwards as shown in the picture below. Do not stand the product upright. Do not support the product by its edges.
When placing the product, lay it on a flat surface with a protective film or
table mat, with the front of the screen facing downwards. Refer to the
illustration. Do not place objects on or apply pressure to the back cover of
the product. The internal mechanism of the product may be damaged.
4. Installation Precautions
Install the product on the wall according to the instructions to avoid damage.
We recommend having the installation done through a certified installation
company.
When using the product vertically or horizontally, ensure that obstacles do
not obstruct the product’s input terminal. Otherwise, the product may not
operate normally. Ensure sufficient space is secured before installation to
place the product. Please refer to the last page of this manual for detailed
product dimensions.
3
WLan Antenna
The product has a WLan connection antenna on the top. When installing the product, ensure that there are no objects on top of the wireless antenna, and that there are no metal objects or devices around the product. Otherwise, the wireless signal may be weak or may not be received at all.
Rear screw hole
There are three screw holes on the back of the product, which can be used for installation. Use three M3x6mm screws (maximum torque 4kgf-cm) to securely fix the mounting base to the product.
Caution: The product may fall and cause injury to others. Note: A wall mount bracket is available for separate purchase and can be easily installed.
5. Product Description
External terminal description
The table and figure below describe the location and function of the product’s
external terminals.
Terminal
Function
DC PWR IN
Connect the adapter to supply power to the product.
: DC Power
Micro USB*1 (OTG)
Connect the product to a computer via the USB cable to debug it.
Type-C USB *1 (HOST)
Connect external storage devices or peripherals such as a mouse and keyboard via the US B Type-C.
EARPHONE
Connect a 3-pole earphone compatible with CTIA standards for audio output.
TF RESET
Insert a Micro SD card through the TF (Micro SD card slot) to expand the
device’s storage c apacity. (Max. 256G)
1. Press briefly for 1 second to turn off the screen. 2. Press and hold for 3
seconds to turn the product off and enter standby mode. 3. Press and hold for
7 seconds to force a reboot.
4
Power Connection Precautions
1. Connect the Type-C connector of the adapter to the “DC PWR IN” port of the
product. 2. Plug the power cable into the outlet. Once the power is connected,
the product will turn on automatically. If the adapter plug is loose, current
noise may occur. Do not repeatedly plug in and unplug the adapter. Caution: ·
The adapter may vary depending on the country of purchase. · In any situation,
use a power cable that is suitable for the alternating current
voltage of the power outlet and conforms to the safety standards of the
country/region of the material, which is approved by the safety standards. ·
Use a certified AC/DC adapter. Warning: If the AC power cable is disconnected,
first remove the adapter from the outlet. When using this product, please use
the following adapter. Use a UL-certified product marked with “Class 2” or
“LPS” or “PS2” which is rated DC 12V, 3A or higher.
6. External Device Connection
Caution: Before connecting, turn off the power to all devices, and after
connecting, turn on the power to all devices.
Description of external terminals
1. Connect a Micro USB / Type-C USB or USB HUB to the product. * When
connecting a flash memory drive, keyboard, or mouse, the product’s flash
memory and the video/image files on the drive will be displayed automatically.
Caution: The product supports the video/image file formats below only through
the Micro-USB / Type-C USB terminal. ( JPEG,BMP,GIF,PNG,MPEG-2, GOOGLE VP8,
H.263, MOTION JPEG, MPEG4(H.264, H.265), MPEG4-Visual, VP9, MPEG Audio, WAV
Audio, OGG Audio, FLAC Audio, MIDI Audio, AAC )
5
7. System Description
Setting
You can adjust many settings of the product using the Settings menu.
1. Select the “All Applications” button on the right side of the main screen
to go to the “All Applications” menu. Enter. Or slide up from the bottom of
the screen. (Figure 1) 2. Select “Settings” from the “All Applications” list.
(Figure 2)
Network Connection
After connecting the power to the product, please follow the steps below to
connect to the wireless router.
1. Select the “All Applications” button on the right side of the main screen
to go to the “All Applications” menu. Enter. Or slide up from the bottom of
the screen. (Figure 1) 2. Select “Settings” from the “All Applications” list.
(Figure 2) 3. Select “Network & Internet” from the “Settings” menu. (Figure 3)
4. Select “Wi-Fi”. (Figure 4) 5. Make sure the switch is enabled. (Figure 5)
6. Select the SSID of the router you want to connect to. To connect to an
encrypted wireless hotspot, you must enter the hotspot password. 7. Return to
the “All Applications” list. Please select the “Lightning” application from
the “All Applications” menu. Please select the “Lightning” application from
the “All Applications” menu. Open the web page and check if you are properly
connected to the wireless internet. (Figure 6)
Bluetooth Connection Setup
1. Select “Connected device” from the “Settings” menu. (Figure 7) 2. Select
“Connection Preferences” in the “Connected devices” item on the “Settings”
menu. Select “Connection Preferences” in the “Connected devices” item on the
Settings menu. (Figure 8) 3. Select “Bluetooth” and activate the switch.
(Figure 9) 4. Check if the switch is activated, then select “Pair new device”.
(Figure 10) 5. Select the device to pair. (Figure 11)
System Language Settings
Change display language in the “Settings” menu:
1. Select “Languages & Input” in “System” from the “Settings” menu. (Figure
12) 2. Select “Languages” from the “Languages & Input” menu. (Figure 13) 3. To
add a desired language, select “Add a language”. (Figure 14) 4. Use the “Bar”
icon on the right side of the menu to drag the desired language to the top
from the list of default languages.
Installed applications
1. Select the “All Applications” button on the right side of the main screen
to go to the “All Applications” menu. Enter. or slide up from the bottom.
(Figure 1) 2. Select “Explorer” from the “All Applications” menu. (Figure 15)
3. Locate the location of the program installation file in the “Explorer”
menu. After finding it, select the corresponding file. (Example, QQ) (Figure
16) 4. Select the “Install” button in the confirmation message that appears on
the screen. Start the installation of the program. (Figure 17) 5. After the
installation is complete, select the “Open” button to run the program. (Figure
18) 6. After installing the application, you can run the program from the “All
Applications” screen. (Figure 19)
6
Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure
9
7
Figure 10 Figure 11 Figure 12 Figure 13 Figure 14 Figure 15 Figure 16 Figure
17 Figure 18 Figure 19
8
8. FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions. (1) This device does not cause harmful
interference. (2)This device must accept any interference received, including
interference that may cause undesired operation. Unauthorized changes or
modifications not expressly approved by the party responsible for compliance
could invalidate the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures. – Change the direction or position of the receiving antenna. – Increase the distance between the equipment and the receiver. – Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. To comply with FCC RF exposure guidelines, this equipment must be installed and operated with a minimum distance of 20cm between the radiator and your body. Use the supplied antenna only.
9. Hazardous Substances in Electrical and Electronic Equipment (RoHS)
components
PCB Cable Plastic Metal parts Display Panel
lead (Pb)
X O O X O
mercury (Hg)
O O O O O
Hazardous substances
cadmium (Cd)
hexavalent
polybrominated
chromium (Cr6+) biphenyls (PBB)
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
polybrominated diphenyl ethers
(PBDE) O O O O O
This part indicates that the content of hazardous substances contained in all
homogeneous materials of the part is below the restriction requirements
specified in the standard GB/T 26572 [Requirements for Concentration Limits
for Certain Restricted Substances in Electrical and Electronic Products]. X:
Indicates that the content of hazardous substances contained in one or more of
the homogeneous materials of the part exceeds the restriction requirements
specified in GB/T 26572-2011. The data in this table has been provided by a
professional certification agency.
: This product has passed the Japanese TELEC certification and meets all the
requirements of the certification. : To better care for and protect the Earth,
when the user no longer needs the product or when the product’s life has
ended, please comply with relevant laws and regulations on recycling of waste
electronics and deliver it to a local manufacturer that is qualified for
recycling, which is recognized by the state.
Appendix 1.
Caution: The following are the specifications for the product. For reference only, if you have any questions, please
contact the supplier.
1. Display
2. Touch
size
23 inch
backlight
LED
liquid cryst
al
display area Resolution Brightness
585.562(H) 48.187(V) [mm] 1920 158 700cd/m2
viewing angle
89° (Contrast Ratio 10) (typi cal) )
Injection rate 60Hz
3. System Configuration
touch pane l
touch techno logy
driving meth od
touch metho d
support syst em
LG Incell USB Free drive fingers or a capacitive pen Android
4. Rated conditions
Android
Android version
Central Processing U nit
ROM
RAM
Android 11 RK3566W 32G ROM 2G RAM
5. Usage environment
rated conditi
ons
Input voltage
consumption
standby power consum ption
power supply interface
110V~220V 50/60Hz <36W 0.5W Type-C
6. Bluetooth
usage en vironmen
t
operating temperatur e
operating humidity storage temperature
storage humidity service life
0 ~ 45
10% RH ~ 80% RH -20 ~ 60 10% RH ~80% RH 50000 hour
7. Product size
operating freq uency
Bluetooth: 2402-2480MHz WiFi: IEEE 802.11a/b/g/n/ac/ax 2.4GHz/5GHz
modulation sc GFSK, Pi/4 DQPSK, 8DPSK, D
BT
heme
SSS, OFDM
Antenna desi gnation
Internal Ant.
Antenna Gain 3dBi
9
10
Appendix 2.
How to Use the MobileRC_Client App
1. Select “MobileRC_Client” from the “All Applications” menu. (Figure 20) 2.
Activate the camera on your mobile phone and scan the QR code to proceed app
authentication. (Figure 21) 3. After verifying with your mobile phone, press
the “Next” button. (Figure 21) 4. Click the options button at the top right.
(Figure 22) 5. If not authenticated, click “Host QRCode” and proceed to step 2
after downloading the mobile app. (Figure 23, 24) 6. If the product and mobile
phone are already paired via Bluetooth, select the paired device; if not,
press “Scan for devices” to create a new connection. (Figure 25)
Figure 20
Figure 21
Figure 22
Figure 23
Figure 24
Figure 25
11
12