Pinolino 14 00 61 G Wardrobe Light Instruction Manual
- June 3, 2024
- Pinolino
Table of Contents
Pinolino 14 00 61 G Wardrobe Light
Assembly plan
Armoire ‘Light’ grandee
Dear clients,
We are glad that you have chosen this premium product. We, the Pimolin staff,
have manufactured this item with greatest care. The materials that were used
are eco-friendly and comply with the strict European safety standards.
To spare you unnecessary effort, carefully read the assembly instructions
first. Check whether you have all the parts and study the illustrations
carefully before you start the assembly. Improper handling or assembly and
especially construction alterations will void all warranty claims.
Safety requirements
Please check regularly that the screws are well tightened. Please set up the
wardrobe so that it is standing against the wall.
Please use only the enclosed hex key and a screwdriver for the assembly.
To avoid damaging the product, do not use an electric screwdriver for
tightening the screws!
Warning:
Take into consideration the risks of open fires and other strong heat sources
e.g. electric heaters, gas stoves etc. in the close proximity of the wardrobe.
Synthetic bags or other synthetic elements / wrappings should be immediately
removed or kept out of the reach of children.
Keep the assembly plan and the hex key for future disassembly or assembly.
Please note:
Use only original accessories and spare parts from the producer or from the
providers.
Assembly instructions
Please take into consideration that the parts should be assembled on an even,
flat surface. Make sure that the article is not inclined.
In order to protect the article and the floor, we recommend using the
packaging of the article as underlay during the assembly.
Maintenance
Wipe with a clean, wet cloth. Also find details on
www.pinolino.de.
What else you should know:
In producing our furniture and toys we only use materials, oils, varnishes and
glazes that do not pose a health hazard and are appropriate for children’s
furniture. As a result of the production process, new furniture can sometimes
retain a specific odor. To counter this harmless inconvenience we recommend
repeated venting.
For service cases:
If, despite constant supervision of the production process, a flaw should turn
up, please mark the respective part clearly in this assembly plan. Print the
Customer Service contact form from our website, www.pinolino.de. Shortly
describe the flaw or the problem. Send the complete assembly plan, a copy of
the receipt and the Customer Service contact form, which you have filled in,
with the specification of the serial number (it can be found on the packaging,
on the assembly instructions and on the article), to our address below.
WITHOUT RECONSIGNMENT OF THIS ASSEMBLY PLAN AND OF THE RECEIPT, POSSIBLE
COMPLAINTS WILL NOT BE TAKEN INTO CONSIDERATION.
Product specifications
Product size
Pack
Other products from this program 
Cot bed
Changing unit wide
Components
Hardware
Additional necessary tools
Persons needed for assembly
The assembly must necessarily be carried out by 2 adults! Eccentric cam WE 10 without border
Eccentric cam WE 15 with border
Assembly
- Please set up the article in numerical order. Please, insert the dowels in the correct position! Please note that all dowels should be at first advanced in the deeper hole up to marking.
Warning
- Screw the back panel only after having convinced yourself that the wardrobe is assembled in a r ight angle.
- The door must be adjusted as follows:
-
The door must be adjusted as follows:
-
Chevelle set vis non comprises dams la livraison.
- Check the wall to determine whether the wall plug is suitable for it
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>