Pinolino 675708 Cot Bed Instruction Manual

: June 12, 2024
: Pinolino

Table of Contents

Product specifications
Accessories for this product
Other products from this program
Components
Hardware
Additional necessary tools
Persons needed for assembly
Assembly
Conversion into junior bed
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Pinolino 675708 Cot Bed Instruction Manual

IMPORTANT, KEEP FOR FUTURE USE:
READ CAREFULLY.

Thank you for choosing Pinolino! We have produced this article with great care and according to strict requirements of European safety standard. Please read the set-up instructions carefully and check the delivered parts’ completeness. In case of improper handling or installation and especially changes to the construction the guarantee will be lost.

Safety advice:
Please check regularly that all screws and fasteners are tight and tighten them if necessary. Plastic bags and any plastic packaging have to be removed immediately or need to be kept out of children’s reach. During installation, place a suitable base underthe parts in orderto protect the product and yourfloor from damage. To avoid damaging the product, do not use an electric screwdriverfortightening the screws! Please make sure that the mattress support is set in the right position, so that the child will not fall. The lowest position is the safest position. As soon as the child can sit up, the mattress base should only be used in this position. To prevent the child from falling out, the cot should no longer be used ifthe child is able to climb out ofthe cot. The mattress must be chosen so that the depth ofthe cot (mattress upper surface to top edge ofthe bed frame) will be at least 50 cm in the lowest position ofthe mattress support and at least 20 cm in its highest position. The maximum thickness ofthe mattress forthis bed must be 10 cm. The mattress size should be 140 cm x 70 cm, or at least 139 cm x 68 cm. The size of mattress must ensure that the gap between the mattress and the side ends is no more than 30 mm, howeverthe mattress is positioned. One of the bedsides has three removable bars, which can be detached. To pull out the removable bars, first push them upwards and then take them out on a side. Mounting is done in reverse order. To avoid impermissible opening dimensions, all removable bars must be removed when a removable baris removed

Warning

Be aware of the risk of open fire and other sources of strong heat, such as electric barfires, gas fires, etc. in the near vicinity of the cot.
Do not use the cot if anypart is broken, torn ormissing and use onlyspare parts approved bythe manufacturer.
Do not leave anything in the cot or place the cot close to another product, which could provide a foothold or present a danger of suffocation or strangulation, e.g. strings, blind/ curtain cords, etc.
Do not use more than one mattress in the cot.

Product specifications

Product size
Carton

Accessories for this product

Mattress for cots
Cover for cots
Canopy for cots
Fitted sheets for cots

Other products from this program

Changing unit wide

Components

2 x AO Top plate
**2 x AU Lower plate

**

1 x BO Bedside without mobile bars
1 x BM Bedside with mobile bars
**2 x KU Lower slat

**

**2 x D Auxiliary bedside

**

1 x C Mattress support
**2 x Q Transversal slat

**

**4 x F Leg

**

Hardware

**12 x WBS Rod

**

**12 x W 14/9 Bolt

**

**12 x WB 8/10 Grub screw

**

**8 x WDH 8/35 Dowel

**

**8 x WDH 8/40 Dowel

**

**8 x N Bolt

**

**8 x VF 6/60 Round-head screw

**

**14 x VF 6/50 Round-head screw

**

**4 x EML 57×11 Metallic hardware for mattress support

**

**4 x VF 6/40 Round-head screw

**

**1 x WI 4 Hex key

**

Additional necessary tools

Persons needed for assembly

The assembly must necessarily be carried out by 2 adults!

Assembly

Please set up the article in numerical order. Please, insert the dowels in the correct position! Please note that all dowels should be at first advanced in the deeper hole up to marking
Please assemble the mattress support with the staples / screws upwards. Place the mattress support on the metallic hardware and fix it with the screws.

Assembly of the canopy frame (not included in the purchased package; optional accessory)

Should you have a canopy with support foot, please consider its positioning as it is shown here.

Conversion into junior bed

If your child no longer needs the bedsides with bars, you can convert the cot into a junior bed.
Please assemble the mattress support with the staples / screws upwards. Place the mattress support on the metallic hardware and fix it with the screws.

Product notice:
This item is partly made of wood. Irregularities in structure and colour are typical characteristics of the natural raw material and do not constitute a defect. In the manufacture of our products we only use oils, lacquers, and glazes that are harmless to health and especially suitable for children. Sometimes, there might be a development of unpleasant smells from the brand- newfurniture due to the production process. In this case, we recommend airing the room several times a day. The smell is harmless. Further information regarding care and cleaning can be found on www.pinolino.de.

Get 10 years warranty!
Go straight up to warranty.pinolino.com and register your Pino lino product.
After registration you are eligible for 10 years warranty.

How can we help you?
It is very important to us that we can help you quickly and directly. If you need help with a Pinolino product, need a spare part for a single component or if you need screws, please fill in the form on www.pinolino.de/ servicefall.