Jabra ELITE8ACTIVE Elite 8 Active Instruction Manual
- September 23, 2024
- Jabra
Table of Contents
Jabra ELITE8ACTIVE Elite 8 Active
Say hello to a more sustainable product
IT products are associated with many sustainability risks throughout their
life cycle. Human rights violations are common in the factories. Harmful
substances are used both in products and their manufacture. Products can often
have a short lifespan because of poor ergonomics, low quality, and when they
are not able to be repaired or upgraded.
This product is a better choice. It meets all the criteria in TCO Certified,
the world’s most comprehensive sustainability certification for IT products.
Thank you for making a responsible product choice, that helps drive progress
towards a more sustainable future!
Criteria in TCO Certified have a life-cycle perspective and balance
environmental and social responsibility. Conformity is verified by independent
and approved verifiers that specialize in IT products, social responsibility
or other sustainability issues. Verification is done before and after the
certificate is issued, covering the entire validity period. The process also
includes ensuring that corrective actions are implemented in all cases of
factory non-conformities. Last but not least, to make sure that the
certification and independent verification is accurate, both TCO Certified and
the verifiers are reviewed regularly.
Want to know more?
Read information about TCO Certified, full criteria documents, news, and
updates at tcocertified.com. On the website, you’ll
also find our Product Finder, which presents a complete, searchable listing of
certified products.
Welcome
Thank you for using the Jabra Elite 8 Active. We hope you will enjoy it! Here
are some key features you will benefit from the Jabra Elite 8 Active:
- Ultra-durable to protect against dust, water & sweat
- Secure in-ear fit with Jabra ShakeGrip™
- Adaptive Hybrid ANC auto-filters unwanted noise, even in windy environments
- Spatial Sound powered by Dolby*
- Stable connection with your Smartwatch while you exercise
Compatibility and availability may vary by device, application, and content. Compatible with smartwatches supporting Bluetooth profiles HFP, A2DP and AVRCP.
Overview
Wireless charging case
Included accessories
Optional accessories
Optional accessories are available at jabra.com/accessories
How to wear
Insert each earbud into your ear and ensure the microphones are pointed towards your mouth.
Changing EarGels
For optimal audio and ANC experience, it is recommended to try on all EarGel sizes. The fit should feel light and comfortable and you may need a different size EarGel for each ear. The medium EarGels are pre-mounted on the earbuds.
How to charge
Get up to 8 hours on a single charge with ANC on, with a total charge of up to 32 hours with the charging case. If you use the earbuds without ANC and HearThrough, you’ll get even more battery, with up to 14 hours in the earbuds and a total of 56 hours with the charging case.
Charging the earbuds
Place the earbuds in the charging case and close the lid. It takes up to 3 hours to fully recharge the earbuds.When the charging case is opened, the LED inside the charging case will light up red, yellow or green to indicate the battery status of the earbuds. The LED on the front of the charging case indicates the battery status of the charging case.
Fast charge the earbuds
When the earbuds are at low battery, placing them in the charging case for 5
minutes will fast charge the earbuds and give up to 1 hour of battery. Fast
charging the earbuds requires that the charging case has a minimum of 30%
battery.
You can see the current battery status of the earbuds and charging case using
the Jabra Sound+ app.
Charging the charging case using USB
It takes up to 3 hours to fully charge the earbuds and the charging case using a USB-C charging cable.
The charging case uses the standard USB voltage of 5V +- 0.25V. It is not recommended to charge the earbuds using a power supply with a higher voltage.
Charging the charging case using the Jabra wireless charging pad
Place the charging case in the center of the Jabra wireless charging pad. The LED on the charging case will flash to indicate the charging case is placed correctly. It takes up to 3 hours to fully charge the earbuds and the charging case.
What the LEDs mean
Note: When fully charged, the LEDs on the charging case and wireless charging pad will turn off.
How to pair
Pairing with a mobile device
- Power on the earbuds by removing them from the charging case. Alternatively, press the Left and Right buttons simultaneously to power the earbuds on.
- Wear the earbuds and press and hold (3 sec) the Left and Right buttons simultaneously until you hear the pairing notification. The earbuds will now be ready to pair.
- Follow the voice-guided pairing instructions to pair with your mobile device.
How to use
Power the earbuds off/on
- To power off the earbuds, place them in the charging case.
- To power on the earbuds, remove them from the charging case.
- Alternatively, the earbuds can be manually powered off by pressing the Left and Right buttons on the earbuds simultaneously. To power on, press and hold (2 sec) the Left or Right buttons until you hear a tone in each earbud.
Music controls
Most functions can be reassigned using MyControls in the Jabra Sound+ app.
Call controls
Most functions can be reassigned using MyControls in the Jabra Sound+ app.
ANC, HearThrough and Voice assistant controls
Most functions can be reassigned using MyControls in the Jabra Sound+ app.
Adaptive Hybrid ANC
Adaptive Hybrid ANC automatically reduces the level of surrounding noise, adapts depending on the shape of your ear and placement of the earbuds, and adjusts in windy environments to provide an optimal ANC experience.
ANC sound mode can be turned off using the Jabra Sound+ app.
HearThrough
HearThrough lets you hear surrounding sounds through the earbuds while wearing them. The earbuds automatically adapt in windy environments to ensure an optimal HearThrough experience.
HearThrough sound mode can be turned off using the Jabra Sound+ app.
Sidetone
- Sidetone enables you to hear your own voice when you are on a call. The benefit of Sidetone is that it enables you to determine how loud you are speaking.
- The earbuds automatically adapt in windy environments to ensure an optimal Sidetone experience.
- Sidetone is on by default during calls and can be turned on/off and adjusted using the Jabra Sound+ app.
- By default, Sidetone cannot be turned on/off using the earbuds. However, it can be added to the earbuds using MyControls in the Jabra Sound+ app.
Automatic volume adjustment
During a call, the volume will gradually increase when going from a quiet environment to a noisy environment. The volume adjustment happens automatically in the earbuds.
Mono earbud use
The right or left earbud can be used individually for music playback or for calls. To activate mono earbud mode, place the unused earbud into the charging case. The used earbud will automatically switch to HearThrough.
The left and right earbuds will automatically relink when both are placed in your ears and switch back to the previous sound mode used.
Auto-pause music and calls
- When one of the earbuds is removed from your ear, music will automatically pause.
- To resume the music, return the earbud to your ear within 60 seconds. After 60 seconds, the music can be manually resumed by pressing the Right button.
Auto-pause music and calls can be configured in the Jabra Sound+ app.
Sleep mode
To conserve battery, the earbuds will automatically power off when they are
disconnected from your mobile device for 15 minutes and are not in the
charging case, or when they have been inactive for 30 minutes.
To exit sleep mode, press and hold (1 sec) the button on each earbud.
Alternatively, place the earbuds in the charging case and then remove them
from the charging case.
Sleep mode can be configured in the Jabra Sound+ app.
Spatial Sound
Spatial Sound optimizes your audio for the most immersive, lifelike sound
experience. The compatibility and availability of Spatial Sound may vary by
device, application, and content.
Spatial Sound is off by default and it can be configured using the Jabra
Sound+ app.
MyControls
MyControls is a feature in the Jabra Sound+ app that enables you to reassign any function to each of the earbud buttons, offering you the flexibility to configure the earbuds precisely to your personal preference.By default, the functions listed below cannot be controlled using the earbuds; however, these functions can be added to the earbuds using MyControls in the Jabra Sound+ app.
- Sidetone on/off
- Hold current call and answer incoming call
- Switch between held call and current call
Multiple call handling
The earbuds can accept and handle multiple calls at the same time.
Voice assistant
Voice assistant settings can be configured using the Jabra Sound+ app.
Audio notifications
The earbuds indicate factory reset, battery level, pairing and Bluetooth connection status using audio notifications. You can select between tone or voice notifications using the Jabra Sound+ app.The supported languages are English, French, German, Japanese, Mandarin Chinese and Korean.
Update firmware
- The Jabra Elite 8 Active can be updated to the latest firmware version using the Jabra Sound+ app.
- If notifications are enabled in the Jabra Sound+ app, you will receive an automatic notification when a firmware update is available.
- If an error occurs during the firmware update, the LED on the charging case will flash red. To complete the update, connect the charging case to a power supply, remove the earbuds from the charging case and then place the earbuds back in the charging case and close the lid. The firmware update will restart.
Reset the earbuds
Resetting the earbuds clears the list of paired devices and resets all settings.
- Place both earbuds in the charging case.
- Press and hold (10 sec) the Left and Right buttons on the earbuds simultaneously until the LED inside the charging case flashes pink.
- Close the lid of the charging case for 5 seconds to complete the reset.
The earbuds will need to be re-paired with your mobile device. Remember to delete/forget the pairing in the Bluetooth menu on your mobile device.
Applications and firmware update
Jabra Sound+
Jabra Sound+ is a mobile application that allows you to configure and update the Jabra Elite 8 Active based on your needs.
Support
FAQ and technical specifications
The Jabra Elite 8 Active FAQ, cerfications and technical specifications are available at jabra.com/support
How to care for your earbuds
- Always store the earbuds in the charging case and safely protected.
- To prevent the depletion of the battery lifetime or capacity, avoid storing the earbuds in hot or cold environments, such as a closed car in summer, or in winter conditions.
- It is recommended to store the earbuds between -20°C and 45°C (-4°F and 113°F).
- Do not store the earbuds for extended periods of time without recharging them (max. three months).
- If the earbuds or the charging case become dirty, it is recommended to clean them with a soft, lint-free cloth that has been dampened with clean water.
- The charging case uses the standard USB voltage of 5v +- 0.25v. It is not recommended to charge the earbuds using a power supply with a higher voltage.
Replacement accessories
Replacement or additional accessories can be purchased online at jabra.com/accessories
Using replacement earbuds
- Place the replacement earbuds into the charging case and close the lid.
- Open the charging case lid and remove the earbuds.
- Wear the earbuds and follow the voice instructions to pair with your mobile device.
- Update the earbud firmware using the Jabra Sound+ app.
Using a replacement charging case
Before using a replacement charging case for the first time, it will need to be synced with your current earbuds and charged for 1 hour.
- To begin syncing, place your current earbuds inside the replacement charging case and close the lid for 10 seconds.
- I f the LED on the charging case flashes pink this indicates that the firmware is being updated.
- Wait until the LED stops flashing pink before opening the charging case.
© 2023 GN Audio A /S. All rights reserved. Jabra® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license.
Made in China
MODEL: OTE190R / OTE190L / CPB190
Declaration of Conformity can be found on www.jabra.com/doc
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>