onn 100135446 Small Wi-Fi Speaker User Guide
- September 19, 2024
- Onn
Table of Contents
100135446 Small Wi-Fi Speaker
“`html
Specifications
- Model: Small Wi-Fi Speaker
- Power Source: USB charging device with 5V DC output
- Connectivity: Wi-Fi, Bluetooth
- Features: Wi-Fi indicator, Source button, Play button, Power
button, Battery indicator, Bluetooth indicator, Volume control
knob
Product Usage Instructions
Safety Precautions
Ensure compliance with FCC regulations for safe usage of the
device. Follow specific operating instructions to maintain RF
exposure compliance.
Operation
First Time Setup
-
Charge the device using a 5V DC output USB charging
device. -
Power On: Press and hold the power button for
2 seconds until you hear the device power on. -
Power Off: Press and hold the power button for
2 seconds until you hear the device power off.
Pairing (Bluetooth Mode)
Single Device Connection:
-
When powered on, the speaker will enter Wi-Fi mode
automatically. -
Press the source button once to enable Bluetooth mode
(Bluetooth indicator will flash). -
Locate “onn. Wi-Fi Speaker S” on your Bluetooth device and
connect to it.
Multipoint Connection (Two Devices):
- Press and hold the source button for 2 seconds.
- Pair your second Bluetooth device with the speaker.
Pairing (AirPlay Mode)
-
When powered on, the speaker will enter Wi-Fi mode.
-
Select “onn Wi-Fi Speaker S” from your device’s Wi-Fi searching
list and connect to it. -
Follow on-screen instructions to complete setup for
AirPlay.
FAQ
Q: How do I know if my speaker is in Wi-Fi mode or Bluetooth
mode?
A: The Wi-Fi indicator will be lit when in Wi-Fi mode, while the
Bluetooth indicator will be flashing when in Bluetooth mode.
Q: What should I do if my speaker is not connecting to my
Bluetooth device?
A: Make sure the speaker is in pairing mode and within range of
your device. Restart both devices and try pairing again.
“`
95±1mm
USER GUIDE
Small Wi-Fi Speaker
Contents & Information
INFORMATION Features
OVERVIEW SAFETY PRECAUTIONS OPERATION CLEANING & CARE
Cleaning SPECIFICATIONS TROUBLESHOOTING
100135446_EN_02282024
95±1mm
Features
· Multi-room Wi-Fi streaming- Play different audio content on different
speakers simultaneously · Bluetooth wireless technology streams audio from all
you devices · Broadcast mode- Stream high quality audio from anywhere in the
house without calls or interruptions · Party Sync modes-Can pair with other
onn. speakers · Apple AirPlay2 multi-room streaming- can pair with other onn
Wi-Fi speakers or AirPlay speakers · Power sound in portable, compact design ·
IP67 Waterproof · 10W RMS output /40W peak output(4×RMS) · Broadcast mode
compatible mode:100135446, 100136627, 100136628 · Up to 15 hours of playtime ·
Charging cable: 60cm
Overview
1
2
1 . Wi-Fi SPEAKER 2 . CHARGING CABLE 3 . USER GUIDE
USER GUIDE Small Wi-Fi Speaker
3
100135446_EN_02282024
12 3 45
6
1 . Wi-Fi indicator 2 . Source button 3 . Play button
7
4 . Power button 5 . Battery indicator 6 . Bluetooth indicator 7 . Volume
control knob
Safety Precautions
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: — Reorient or relocate
the receiving antenna. — Increase the separation between the equipment and
receiver. — Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. — Consult the dealer or an
experienced radio/TV technician for help. This device complies with part 15 of
the FCC Rules. Operation is subject to the following two conditions: ( 1 )
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
WARNING:
Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Warning:
Changes or modifications to this unit not espressly approved by the party
responsible for compliance could void the user´s authority to operate the
equipment. Need help? We’re here for you every day from 7 a.m.-9 p.m. CST.
Give us a call at 1-888-516-2630.
Produced for Walmart Inc., Bentonville,AR 72716
RF Exposure Compliance This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. End user must follow the
specific operating instructions for satisfying RF exposure compliance. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio
waves established by the Federal Communications Commission (USA). These
requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The
highest SAR value reported under this standard during product certification
for use when properly worn on the body.
Ver.00 02/28/24
FCC ID: 2ALVK-ONN100135446
For product assistance WE CAN HELP
1-888-516-2630
7 DAYS/WEEK 7:00am- 9:00pm CST
THIS GUIDE CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Find more at
Front
760mm
Operation
FIRST TIME SETUP
Device may need to be charged before use.
CAUTION Only use a USB charging device that is 5V DC output.
1. POWER ON Press and hold power button for 2 seconds until you hear “power
on”.
2. POWER OFF Press and hold power button for 2 seconds until you hear “power
off “.
PAIRING (Bluetooth mode)
One device connect to speaker
1. When you first power on, this speaker will
enter into Wi-Fi mode automatically.
X1 press, you will see
bluetooth indicator flash. 2. Find “onn. Wi-Fi Speaker S” on your
onn. Wi-Fi Speaker S
BT device and connect it.
Two devices connect to speaker(multipoint connection)
1. Press and hold source button 2 sec, now you can find it from your 2nd
Bluetooth
PAIRING ( AirPlay mode)
1. When you first power on, this speak will enter into Wi-Fi mode. 2. Find
“onn Wi-Fi Speaker S” from your device in Wi-Fi searching list and select it.
WLAN
Edit
WLAN onn Wi-Fi Speaker S
3. Set up to join”XXX”. 4. Select and go to next, it takes 13-15 seconds to join network. 5.Select this speaker from your AirPlay picker list.
Cancel AirPlay Setup Next
NETWORK
XXX
Speaker Name onn. Wi-Fi Speaker M
Cancel AirPlay Setup Done
Setting up this AirPlay speaker to join “XXX”
Tuesday, January 23
17:50
PHONE CALLS
Control Action ×1 press
Press and hold
Result Answer incoming call End current call Reject incoming call
PLAY MUSIC
Control Action
Result
×1 press
Play/pause
×2 press
To next song
×3 press
To previous song
Rotate Clockwise Increase volume
Clockwise
Reduce volume
OTHER OPERATION
Control Action
Result
Hold 2 sec ×2 Press
Power on/power off Broadcast
×1 press
Switch different mode
Hold 2 sec
Multipoint connection
Hold 5 sec
Reset Wi-Fi/BT pairing
BROADCAST
Enter broadcast When this speaker connect to a Bluetooth device
×2 press power button to entry into BIS mode
you will hear”Broadcast”
then × 2 press other speakers
they can connect together.
CHARGE
It is recommended that you use the provided charging cable
connect USB-A end to 5V power adapter or other devices
connect USB-C end to the charging port of it.
Note: Device may take up to 3 hours to get fully charged when
at 0% battery.
×2 Press
×2 Press
About 3 hours
100136628
100136627
Exit broadcast
X2 Press power button *Sync mode compatible mode list:
10035446 100136627 100136628
10035446
(5V 2A) Charging: Battery indicator is flashing
Fully charged: Battery indicator states on
Cleaning & Care
CLEANING
1. Wipe down surface with a light cloth 2. Never use abrasive pads to clean
device 3. Avoid using liquids to clean device
Specifications
Weight 0.701lb
Product Dimensions (L x W x H) 4.06 x 1.84x 4.02 inches
Color Rich black
Troubleshooting
Problem
Prevenon/Soluon
·Ensure Bluetooth funcon is acvated on Bluetooth device.
·Ensure you have paired your unit with Bluetooth device.
Cannot find “onn.Wi-Fi Speaker M ” on Bluetooth device
·Ensure this speaker is in Bluetooth mode, press and hold Source buon 2s(you hear “Bluetooth Pairing” tone) to enter into Bluetooh pairing. ·Ensure this speaker is in Bluetooth mode, press and hold Source buon 5s(you hear “Bluetooth Reset” tone) to clean pairing records and entry Bluetooh pairing. ·Factory Reset:Press and hold Source buon and Play buon 3s, this speaker will power off. Then power on and enter into Bluetooth mode to pairing.
·Ensure Wi-Fi funcon is acvated on iPhone/iPad/Mac device.
Cannot find “onn Wi-Fi Speaker M ” on Wi-Fi searching list
·Ensure this speaker enter into Wi-Fi mode.
·Ensure this speaker is under AirPlay network configuraon mode, press and hold
Source buon 5s(you hear “Wi-Fi Reset” tone) to clean AirPlay network
configuraon records. ·Factory Reset:Press and hold Source buon and Play buon
3s, this speaker will power off. Then power on and enter into Wi-Fi mode to
pairing.
·Ensure this speaker is on the same network as iPhone/iPad/Mac device.
Cannot find “onn Wi-Fi Speaker M ” on AirPlay picker list
Sound is not produced
·Ensure this speaker connect Wi-Fi successfully,you hear “AirPlay ready” tone
and Wi-Fi indicator states on. ·Re-configure the network:Press and hold Source
buon 5s(you hear “Wi-Fi Reset” tone). ·Factory Reset:Press and hold Source
buon and Play buon 3s, this speaker will power off. Then power on and enter
into Bluetooth mode to pairing. ·Ensure this speaker is under Bluetooth
pairing or AirPlay pairing, and select the correct input source.
·Adjust the volume control knob.
Cannot power on
·Charge baery.
Back
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>