5TH WHEEL ES14, ES09 Electric Scooter User Manual
- September 23, 2024
- 5TH WHEEL
Table of Contents
ES14, ES09 Electric Scooter
Specifications
- Model: ES14
- Electric Scooter
- Wheel Size: 10 inches Inner Honeycomb Tyres
- Motor: Hub Motor
- Brakes: Rear Disc Brake, Disc Brake
- Battery: Built-in Lithium Battery
- Features: LED Display, LED Headlight, Turn Signal, Folding
Mechanism, Front fork shock absorption, Charging Port,
Kickstand
Product Usage Instructions
1. Safety Precautions
Caution: The brake may become hot during use. Do not touch it
after use. Always wear shoes when riding the scooter.
2. Starting and Operating the Scooter
-
Press the power key to turn on the scooter.
-
For safety, slide the scooter to 2mph to activate the
throttle. -
The scooter cannot be ridden in walking mode but can be
pushed. -
Do not attempt to start the scooter while it is charging.
3. Assembly Instructions
-
Unfold the folding mechanism of ES14 and lower the
kickstand. -
Insert the handlebar into the scooter bar and connect the line
connector securely. -
Use the tools provided to tighten the screws for
stability. -
Check that the power switch works correctly after
assembly.
FAQ
Q: Can I modify or transform the scooter?
A: No, do not modify or transform the vehicle in any way
including the steering tube, sleeve, stem, folding mechanism, or
rear brake as it may compromise safety.
Q: What should I do if any items are missing or damaged in the
package?
A: If any items are missing or damaged, please contact email:
aftersales@invanti.com for assistance.
25.Caution, the brake may become hot in use. Do not touch after use.
26.Eliminate any sharp edges caused by use.Do not modify or transform the vehicle, including the steering tube and sleeve, stem, folding mechanism and rear brake.
2 Introduction to Functions
1. Product Overview Turn Signal
LED Display
Rear Disc Brake LED Headlight
Folding Buckle
Scooter Bar
27.The user has the obligation to always wear shoes when riding.
28. In any case, anticipate your trajectory and your speed while respecting
the code of the road, the code of the sidewalk and the most vulnerable. If
any, local special laws and regulations should be
observed during riding of this product.
8
Folding Switch
Folding Mechanism
Front fork shock absorption
Hub Motor
Charging Port Rubber Pedal
Rear Fender
Taillight License Plate Frame Disc Brake
10 inches Inner Honeycomb Tyres
Kickstand Built-in Lithium Battery
10 inches Inner Honeycomb Tyres
*The accessories and any additional items which are not approved by the manufacturer shall not be used.
9
Accessories
Model No. ES14 Original Instructions
User Manual of 5TH WHEEL Electric Scooter
V1.0
The picture is for reference only. Before using the product, please read this manual. IMPORTANT! Read carefully and keep for future reference.
Manual
M5*12 Screw×4
Foot brace Screwdriver silicone cover×2
Power Cable
Note: Please check out all the items in the package carefully. If anything is missing or damaged, please contact email: aftersales@invanti.com
3 Product Display
Unfolded status
Product Contents User Manual M5*12 Screw Screwdriver
Quantity 1 4 1
Folded status
Foot brace silicone cover
2
Power Cable
1
10
11
This QR code is a video tutorial for product use. It is recommended to scan this QR code to learn more about how to use the product.
Pay attention
before riding
1. Press the power key to open the scooter.
2. For safety, the factory setting of scooter ES14 is non-zero start, you
need to slide the
scooter to 2mph, and the throttle can be used normally. 3. The scooter can be
turned on normally and cannot ride in walking mode, but can only
be pushed.
4. Can’t start when charging. 5. Do not throw away the manual, please refer
to the manual for specific operations.
12
4 Scooter Assembly
1.Unfold the folding mechanism of ES14 and put down the kickstand.
Unfold ES14 and fix the folding mechanism. (Refer to “Folding and Carrying”
for retails of unfolding.)
2.Insert the handlebar into the scooter bar.
Connect the line connector in the head and riser.
3.Use the tools included in the package to tighten the screws.
4.After assembly, check whether the power switch can work normally.
13