Pump Controls N2P Sentry Remote Alarm Panel Installation Guide
- September 19, 2024
- Pump Controls
Table of Contents
Pump Controls N2P Sentry Remote Alarm Panel
Product Information
Specifications
- Product Name: Sentry Remote Alarm Panel
- Compatibility: Integrates with N2P pump control series
- Functionality: Notifies of faults, compatible with voltage-free contact alarms
- Power Supply: 230V
Product Usage Instructions
Installation Guide
The Sentry controller is designed to notify users of faults and can be
integrated with N2P pump control series. It is suitable for pump controls, UV
treatment systems, blocked filters, or any application that requires an alarm
triggered by a voltage-free contact.
Electrical Work
All electrical work related to the installation of the Sentry controller must
comply with required wiring regulations to ensure safety and proper
functionality.
Wiring Diagram
Refer to the attached wiring diagram provided in the user manual when
installing the controller to ensure correct connections.
Installation Instructions
- Connect a protected 230V power supply to the alarm panel.
- Refer to the wiring diagram for proper connections.
- Ensure all electrical work is conducted according to regulations.
- Integrate the alarm panel with the compatible N2P pump control series.
FAQ (Frequently Asked Questions)
Q: Can the Sentry Remote Alarm Panel be used with other pump control
series?
A: The Sentry Remote Alarm Panel is specifically designed for integration with
the N2P pump control series for optimal performance.
Sentry Remote Alarm Panel
Installation Guide
OVERVIEW
The Sentry controller notifies you in the event of a fault and can be
integrated with any of the N2P pump control series.
Use it for pump controls, UV treatment, blocked filters, or any application
that has a voltage-free contact for an alarm.
CONTROLLER SPECS
The controller is rated to 200–260 VAC, 0.1kW, 50Hz and is designed to be
mounted in a standard light switch flush box.
- All electrical work must be carried out per required wiring regulations.
- Refer to attached wiring diagram when installing the controller.
pumpcontrols.com.au pumpcontrols.co.nz
Installation Instructions
- Connect a protected 230V power supply to the alarm panel. The rated current draw of the alarm panel is <0.1A at 230V.
- The alarm panel can accept a voltage-free connection to the terminals labelled Black and Brown. If this input closes, a buzzer will sound and the Fault LED will illuminate. The buzzer can be muted by pressing themute button.
- When there is no fault, the green System OK LED illuminates.
- Place the alarm panel into a standard light switch flush box and ensure it is secured in place.
Note: The top two terminals labelled Phase and Neutral is where to wire power supply and the fault inputs are wired into the terminals at base, labelled Float.
Any questions about installation? Please visit our website | www.pumpcontrols.com.au | www.pumpcontrols.co.nz
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>