Ortek WKP-3170M Bluetooth Keypad User Manual
- June 5, 2024
- Ortek
Table of Contents
WKP-3170M Bluetooth Keypad
User Manual
About This Manual
This manual is designed to assist you in installing and using the Bluetooth
Keypad. Information in this document has been carefully checked for accuracy;
however, no guarantee is given to the correctness of the contents. The
information in this document is subject to change without notice.
Edition
1st Edition,
Copyright
© Copyright 2022
This document contains proprietary information protected by copyright. All
rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means, in any form, without prior written
permission of the manufacturer.
Trademarks
All trademarks and registered trademarks are the property of their respective
owners.
Federal Communications Commission Statement
This device complies with FCC Rules Part 15.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the Federal Communications Commission
(FCC) rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
causes harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by doing one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
The antenna(s) used for this transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Radiation Exposure Statement:
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or
transmitter.
Introduction
Thank you for purchasing the Bluetooth Keypad. This User’s Manual contains
information that will help to operate the device as well as answer questions
about certain special keys and buttons. Please keep this manual in a safe
place for future reference.
System Requirements
Mac OS
Package Contents
- Bluetooth Keypad
- USB-A to USB TypeC cable
- User’s manual
Note:
There is a power switch on the top of the Bluetooth Keypad. When not in use,
please turn to OFF to save battery power.
Technical Specifications
Keypad devices: use HID coordination Bluetooth devices
Keypad Size: 115 x 80 x 10 mm
Weight: 55g
Keypad layout: 20 keys
Battery Capacity: Li-ion battery 160 mA
Operating voltage: 3.0-4.2 V
Working current: under 3 mA
Sleep current: under 70 uA
Input: 5V 1A
Charging time: 1.5- 2hrs
Logo name: Bluetooth keypad
Awaken way: Press any key
LED lights:
Status | LED Colour | Display |
---|---|---|
Pairing | Blue | Fast flashing |
Battery Low | Blue | Slow flashing |
Charging | Red | ON |
Fully Charged | None | OFF |
Bluetooth pairing
- Turn on the power, and press the Pairing key to enter pairing mode. Pairing Blue light flashes.
PS: 1. Paring will stop when not paired, if needed, press the Pairing key for pairing again. 2. Power Switch: turn on shows green.
- Open the Bluetooth settings and switch Bluetooth to On.
- Select “Bluetooth Keypad” device.
- Bluetooth Keypad is now connected.
- Pairing complete.
Keypad key function:
Name | Function |
---|---|
1 | 1 |
2 | 2 |
3 | 3 |
4 | 4 |
5 | 5 |
6 | 6 |
7 | 7 |
8 | 8 |
9 | 9 |
0 | 0 |
0 | 0 |
. | . |
= | = |
+ | + |
– | – |
* | * |
/ | / |
Backspace | |
enter | Enter |
clear | Clear |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>