Aijia AJ-SQ20-4G Low Power Video Camera User Guide
- September 18, 2024
- AIJIA
Table of Contents
AJ-SQ20-4G Low Power Video Camera
“`html
Product Specifications
- Model: XYZ-2000
- Class: B digital device
- Compliance: FCC Rules Part 15
- Radio Frequency Energy: Yes
- Interference Protection: Yes
Product Usage Instructions
1. Installation
Ensure the device is placed in a residential installation
following these steps:
- Find a stable location for the device.
- Connect the necessary cables as per the manual.
- Power on the device and ensure proper ventilation.
2. Operation
To operate the device effectively:
-
Refer to the user manual for specific functions and
features. -
Follow the instructions for using different modes or
settings. -
Monitor the device for any unusual behavior during
operation.
3. Maintenance
To maintain the device and prevent interference:
-
Regularly clean the device as per the maintenance
guidelines. -
Check and replace any worn-out cables or components
promptly. -
Keep the device away from sources of electromagnetic
interference.
Frequently Asked Questions (FAQ)
Q: What should I do if I experience radio or TV
interference?
A: If you notice interference, try turning the equipment off and
on. If the interference persists, refer to the manual for
troubleshooting steps or contact customer support.
Q: How can I ensure proper installation of the device?
A: Follow the installation guidelines provided in the manual
carefully. Ensure proper cable connections and adequate ventilation
for optimal performance.
“`
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable
protection against harmful interference in a residential installation. This
equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with
the instructions, may cause harmful interference to radio communications.
However, there is
no guarantee that interference will not occur in a particular installation. If
this equipment
does cause harmful interference to radio or television reception, which can be
determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by
one or more of the following measures: · Reorient or relocate the
receivingantenna.
· Increase the separation between the equipment and receiver. · Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. · Consult the dealer or an experienced radio/TV
technician for help. Caution: Any changes or modifications to this device not
explicitly approved by manufacturer
could void your authority to operate this equipment. This device complies with
part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation. RF Exposure Information This equipment complies
with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>