FIREPOWER ADXHS1125 Gaming Headset Instruction Manual
- September 17, 2024
- FIREPOWER
Table of Contents
FIREPOWER ADXHS1125 Gaming Headset
Specifications
- Model: ADXHS1125
- Rating: 5 V 100 mA
- Frequency Range: 20-20,000 Hz
- Speaker Sensitivity: – dB
- Impedance: – Ohms
- Speaker Diameter: 50 mm
- Speaker Input Power: 20mW / 30mW max
- Microphone Sensitivity: – dB
- Microphone Directivity: Omnidirectional
- Dimension: –
- Net Weight: 368 g
Product Overview
The Firepower HS11 Gaming Headset is designed to provide an immersive audio experience for gaming enthusiasts. With its high-quality speakers and microphone, this headset offers crystal-clear sound and seamless communication with other players.
Headset Connection
- Plug the unit into the USB port of your computer.
- Download the latest gaming software from https://downloads.adxgaming.com.
Software Installation
- Run the software installer (ADX ADXHS1125 setup.exe).
- Follow the on-screen instructions to complete the installation.
- Restart your computer when prompted.
User Interface – EQ Effects
The headset offers EQ effects such as None, Theater, Bathroom, Living Room,
and Corridor to customize your audio experience.
User Interface – Microphone
The user interface shows the audio input level of the microphone for clear
communication.
User Interface – Virtual 7.1
The headset features virtual 7.1 surround sound for an immersive gaming
experience.
Hints and Tips
For optimal performance, adjust the volume gradually to avoid hearing
damage. Refer to the user manual for troubleshooting tips.
FAQ
-
Q: How do I adjust the microphone settings?
A: You can adjust the microphone settings through the software interface on your computer. Make sure the microphone is selected as the input device -
Q: Can I use the headset with consoles?
A: The Firepower HS11 Gaming Headset is designed for use with computers. Compatibility with consoles may vary.
GAMING HEADSET
INSTRUCTION MANUAL ADXHS1125
Safety Warnings
- Read all the instructions carefully before using the unit and keep them for future reference.
- Retain the manual. If you pass the unit onto a third party, make sure to include this manual.
- For traffic safety, do not use the unit while driving or cycling.
- Listening to loud sounds for prolonged periods of time may permanently damage your hearing.
- Before putting on the unit, turn the volume down then put the unit on and slowly increase the volume until you reach a comfortable listening level.
Thank you for purchasing your new product.
We recommend that you spend some time reading this instruction manual in order
that you fully understand all the operational features it offers. You will
also find some hints and tips to help you resolve any issues.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
Unpacking
Remove all items from the packaging. Retain the packaging. If you dispose of
it please do so according to local regulations.
The following item is included:
- Microphone
- Volume + Button
- Volume – Button
- Microphone On/Off
- Button Headphone On/Off Button
Headset Connection
System Requirements
Operating Systems: Microsoft® Windows® 10 / 11 Hardware: 1 available USB A port
Download the Installation Software
- Plug the unit into the USB port of your computer.
- Download the latest gaming software from
https://downloads.adxgaming.com (under SOFTWARE DOWNLOADS).
Software Installation
- Run the software installer (ADX ADXHS1125 setup.exe).
- Click “Next >” to start installation.
- After the installation is complete, select “Yes. Restart now“ to restart your computer. Click “Finish” to confirm.
- To access the user interface, you can find the installed software in the System Tray. Look for the software’s icon in the System Tray to bring up the user interface on your desktop.
- You may “Save” your settings and “Load” it when desired.
User Interface – EQ Effects
After launching the software, select “EQ“.
EQ and 3D effect settings
- Select “EQ on” for EQ effect, and “3D on” for 3D effect.
Profile 1/2/3/4
- Select one of the profiles, adjust the level on 60 Hz / 300 Hz / 1200 Hz / 3600 Hz / 12000 Hz from -inf db to 12 db.
- Select “Reset“ to reset all levels to 0 db.
User Interface – Effect
- After launching the software, select “Effect“.
Select different Effect between “None”, “Theater“, “Bathroom“, “Living Room“ and “Corridor“.
User Interface – Microphone
After launching the software, select “Mic“.
- Set the microphone sound level from 0 to 100.
- Select “Mute“ to mute the microphone.
- The microphone level meter shows audio input level.
User Interface – Virtual 7.1
After launching the software, select “Virtual 7.1“. It allows for personal
calibration to fit for your ears, enabling you to configure to your perfect
individual setting.
- After selecting “Virtual 7.1“, you may further select between “CCW“ (counter clockwise) and “CW“ (clockwise) for the rotating direction.
- Select “Reset“ to reset the default settings.
Hints and Tips
- Make sure the plug is fully plugged into the port of your device, and the device is on, or try to use a different USB port.
- If the unit is not working properly, re-insert the plug(s) into the port(s) of your device.
- If the software is not working properly, uninstall it and then reboot the computer. Re-install the software.
Specifications
| Model | ADXHS1125 |
|---|---|
| Rating | 5 V 100 mA |
| Frequency Range | 20-20,000 Hz |
| Speaker Sensitivity | 103dB ± 3dB |
| Impedance | 32 Ω ±15% |
| Speaker Diameter | 50 mm |
| Speaker input power | 20mW / 30mW max |
| Microphone Sensitivity | -28 ±3 dB |
| Directivity | Omnidirectional |
| Dimension | 175 × 95 × 198 mm |
| Net Weight | 368 g |
Features and specifications are subject to change without prior notice.
Currys.co.uk All the support you need. Whether it’s a tech emergency or you need plain good advice, we’re always on hand to help. UK: 0344 561 1234 IRE: 0818 810575
Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day. Visit www.partmaster.co.uk or call 0344 800 3456 (UK customers only). Calls charged at National Rate.
The symbol on the product or its packaging indicates that this product must
not be disposed of with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment.
For more information about where you can drop off your waste for recycling,
please contact your local authority, or where you purchased your product.
Windows is a registered trademark of Microsoft Corporation in the United
States and other countries.
All trademarks are the property of their respective owners and all rights are
acknowledged.
Currys Group Limited (co. no. 504877) 1 Portal Way, London, W3 6RS, UK
EU Representative
Currys Ireland Limited (259460) 3rd Floor Office Suite Omni Park SC, Santry,
Dublin 9, Republic of Ireland
IB-ADXHS1125-240702V1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>