MILORA PM 050-K Bed with Lifting Mechanism Instruction Manual
- September 17, 2024
- MILORA
Table of Contents
- PM 050-K Bed with Lifting Mechanism
- Product Specifications:
- Product Usage Instructions:
- Package Contents:
- Assembly Instructions:
- Legs and Base Setup:
- Mattress Holders:
- Q: How do I determine the correct placement of the side
- Q: Can I use a different size mattress with this bed?
- Q: Are additional tools required for assembly?
PM 050-K Bed with Lifting Mechanism
“`html
Product Specifications:
- Model: Bed with lifting mechanism
- Side Bars Type: 050-, 280-
- Compliance: GOST (Russian National Standard) 19917-2014
- Dimensions: 14014090 V2
- Material: Metal
Product Usage Instructions:
Package Contents:
The package includes various parts and accessories required for
assembling the bed with lifting mechanism. Refer to the packing
list for details on each item.
Assembly Instructions:
-
Start by unpacking all the components from the packages.
-
Identify each part based on the provided packing list.
-
Follow the detailed assembly instructions provided in the
manual. -
Use the appropriate tools such as screws and nuts to secure the
different components together. -
Ensure all parts are tightly fastened to guarantee stability
and safety.
Legs and Base Setup:
The legs and base setup may vary depending on the specific bed
model. Refer to the showroom sample or website representation for
guidance on installing the legs correctly.
Mattress Holders:
Insert the mattress holders in the designated slots on the bed
base. Ensure they are securely attached to prevent any movement of
the mattress during use.
Frequently Asked Questions (FAQ):
Q: How do I determine the correct placement of the side
bars?
A: The side bars model is shown on the product label. Refer to
the label for proper orientation and placement of the side bars
during assembly.
Q: Can I use a different size mattress with this bed?
A: The bed is designed to accommodate a specific mattress size.
Using a different size might affect the functionality and safety of
the lifting mechanism. Stick to the recommended mattress size for
optimal performance.
Q: Are additional tools required for assembly?
A: The necessary tools for assembly, such as screws and washers,
are usually included in the packaging. However, having a
screwdriver and wrench on hand may facilitate the assembly
process.
“`
Instructions for furniture assembling
050-, 280- Bed with lifting mechanism
with side bars type 050-, 280-
- / *side bars model is shown on the product lable
025/2012, 19917-2014 The bed is in full compliance with GOST (Russian National Standart) 19917-2014 . . 11 11.09.2024. 0: 50-, 280- Instructions for furniture assembling. Bed with lifting mechanism. Version 11 from 11.09.2024 For sidebars types0: 50-, 280-
1
2
2
3
01
09
(*
)
()
( )
02
03
04 24 81
. 2020
175
14014090 V2
20 19
3052 L-120
50100*25
06
–
1 1 1 1 2 1 1 8
20
4
4 4
2
12
6*1,6
4
01
6*20
36
57
6*25
4
11
6
4
08
3,8*32
(. )
05
(*
)
36 1 1 2
. . 11 11.09.2024. 0: 50-, 280-
2 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
4
01
10 17
14 31
(* )
101
6*16
01 07 06
8*45 8 8
1
1 2 2 2 8 4 4 4
,
!
. *
( – Star, Star Grand)
1
77
h-100
4
39
8
4
42
8
4
2
54
1156 h-150 (.8 )
4
39
8
4
42
8
4
. . 11 11.09.2024. 0: 50-, 280-
3 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
3
4
5
6
7
8
9
Mira
69
1156 h-120
39
8
42 130 144 81 129 144 81 122 144 81 127 144 81 148 40
8 6045120 8
8
2020
h-150 8 2020
h-100 8 2020
h-150 8 2020 8
39
8
149 176 145 81
820 h-120
6663/4840 850
20*20
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 12 12 12 4 4 4
. . 11 11.09.2024. 0: 50-, 280-
4 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
Package
Part
Package No1
Package No2
Package No2 Accessories
pack
Packing list for the bed
Item
Name
01
Backrest
09
Cover for side bars (*for beds with removable cover)
Instructions for use (certicate)
Fabric sample (sewed in the cover for sidebars)
02
Lateral sidebar
03
Intermediate sidebar
04 24 81
Intermediate crosspiece
The rails complete set depending on the bed size Glidw self-adhesive 2020
175
Furniture angle piece 14014090
20 19
Fngle piece 3052 L-120 oval black
Metal shelf 50100*25
06
Strap
12
Washer 6*1.6
01
Screw 6*20
Quantity 1 1 1 1 2 1 1 8
20
4
4 4 2 4 36
57
Screw 6*25
4
11
Nut M6
4
Package No3
08
Screw self-fapping 3.8*32
Assembly instructions
Legs Legs variant depends on a bed model that is represented
as a sample in showroom or on the website. (See Legs Delivery list)
Linen box bottom
05
(may be packed together
with the backrest)
36 1 1 set 2
. . 11 11.09.2024. 0: 50-, 280-
5 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
Package
Package No4
Packing list for the bed
Part
Item
Name
01
Bed base
Quantity 1
10
Lifting mechanism
1 set
17
Gas shock absorbers
2
14
2
Mattress holders (*may be of different variant)
31
2
101
Screw 6*16
8
01
Bolt 8*45 (head)
4
07
Washer M8
4
06
Nut M8
4
Legs variant depends on bed model that is represented
!
as a samplein showroom or on the website Complete set is shown on the label of Accessories Pack
Packing set for legs (may be separately packed – for beds Star, Star Grand)
Package
Part
Item
Name
Quantity
Legs complete
set 1
77
Leg for beds chrome h-100
4
39
Nut M8
4
42
Washer M8
4
Legs complete
set 2
54
Leg for beds chrome h-150 (pin 8mm)
4
39
Nut M8
4
42
Washer M8
4
. . 11 11.09.2024. 0: 50-, 280-
6 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
Package
Part
Legs complete
set 3
Legs complete
set 4
Legs complete
set 5
Legs complete
set 6
Legs complete
set 7
Legs complete
set 8
Legs complete
set 9 only for the
bed Mira
Packing set for legs
Item 69
Name
Leg for beds chrome 1156 h-120
39
Nut M8
42 130 144 81 129 144 81 122 144 81 127 144 81 148
Washer M8
Leg wooden conical 6045120 veneer oak pin M8
Nut M8
Glidw self-adhesive 2020
Leg conical h-150
Nut M8
Glidw self-adhesive 2020
Leg wooden h-100
Nut M8
Glidw self-adhesive 2020
Leg wooden h-150
Nut M8
Glidw self-adhesive 2020
Leg black matte
40
Washer M8
39
Nut M8
149 176 145 81
Bolt 820
Leg plastic h-120 6663/4840 brown
Screw 850 Glidw self-adhesive
2020
Quantity 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 12 12 12 4 4 4
. . 11 11.09.2024. 0: 50-, 280-
7 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
: 1. . . . 2. . . 3. . – , , . , . 4. , ! – . 5. /-/ ! /-, . , . 6. /-/ . , ,
, ! 7. , . .
Prior to assembly: 1. Check all the parts for any damage before assembling.
Any claim for them on assembled article is not accepted by Manufacturer.
Package shall be kept until the end of assembly process. 2. When revealing any
defect or incompleteness in the process of assembling, the package shall be
kept until arepresentive of trading company arrives. Assembly and operation
Instructions shall be kept during all the period of exploitation. 3. Check the
parts and accessories quantity against the list. Manufacturer retains the
right to make structural changes into the article, change accessories and
metalware for analogous that do not affect design and do not inuence on
functional properties of the article. If incompleteness or any damage, mark
absent part number and inform the store to replace it. 4. Maintain the
assembly order given in these instructions! If the Assembly and Operation
Instructions are not followed the manufacturer’s warranty obligations are
removed. 5. To install sofa/armchair-bed/bed a at oor zone shall be chosen! If
the oor are curved may present deviations in the functioning of transformation
mechanism of sofa/armchair-bed/bed, distortions of the article form. Any
carpet presence is undesirable, because it makes transformation process
difcult. 6. Perform the sofa/armchair-bed/bed assembly by two. Move all the
parts gently without any jump, place them steady, escape their falls and hits!
7. Move furniture and their parts only slightly lifted. This will allow to
exclude any deformation or damage.
/ For assembling required
cross-point screwdriver
10,13
Open-end wrench
1
2
3
1
Scissors
Tape-measure
. . 11 11.09.2024. 0: 50-, 280-
8 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
2
01 3,8*32 8
02 04
08
02
4
1
03
19
8
19
3.1 / Backrest
D
/ Installing the rails
/ cross-piece
D
25
25
25
/ Intermediate sidebar
/ Lateral sidebar
/ Lateral sidebar
25
25
3,8*32 28 08
1
24
28
24
04
24 24 The rails complete set
.3.2/ is to be seen in it. 3.2
. . 11 11.09.2024. 0: 50-, 280-
9 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
3.2
The rails complete set depends on the bed size
— 50 / rail 50cm
— 60 / rail 60cm
— 80 / rail 80cm
D — 130 /
rail 130cm — 30 /
rail 30cm
160*80
18080/19080
18090/180100/ 19090/ 190100
180120/190120
20090/200100
180140/190140
D D
180160/180180/ 180200/190160/ 190180/190200
D
D D
D
200*80
200*120
200*140
D
D
200160/ 200180/200*200
D
D
D
D
. . 11 11.09.2024. 0: 50-, 280-
10 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
4
10
6*20 10
01
2
2
1
175
20
5
10
6*20 10
01
2
2
1
175
20
6
6
6*20 6
01
2
1
175
. . 11 11.09.2024. 0: 50-, 280-
11 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
7
4
6*25 4
57
6*1,6 4
4
2
12
11
20
1
1
10
10
8
«»
.12-16/
If your bad has a backrest with “ears” move on to it.12-16
9
01
6*20 10 01 02 1
/ do not tighten
10
02
. . 11 11.09.2024. 0: 50-, 280-
12 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
10
03
6*20 6 01 1
/ do not tighten
6
11
6*20 4
01
04
1
.17/ then move on to it.17
12
, «»/
Bed assembly sequence if backrest with “ears”
6 / do not tighten
03
6*20 6
1
01
. . 11 11.09.2024. 0: 50-, 280-
13 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
13
4
6*20 4
01
04
1
14
,
!/
Only for beds with removable cover and side bars completely
upholstered with technical fabric
09
5-10cm
15
1
2
3
/
Bring together the cover seams with the side bars corners
/ Fix the cover edges
/
Fix the cover upper edge on the corners
Only for beds with side completely upholstered with technical fabric and removable cover
4
5
/ spread evenly the cover
on the side bars
/
Fix the cover wer edge
– .16/ If side bar is upholstered with fabric or articial leather move on it.16
. . 11 11.09.2024. 0: 50-, 280-
14 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
19
6, 7/
Legs complete set option 6, 7
13
4
4
4
122/ 127
144
4 81
1 13
20
4
8/ Legs complete set option 8
148
12
12
40 12
149 1
39
13
13
12
21
8*50 4
4
145 4
81 1
«» legs sloping sides shall face one another
. . 11 11.09.2024. 0: 50-, 280-
16 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
16
01
6*20 10 01 1
/ do not tighten
10
17
4 54/ 69/77
4
1, 2, 3/ Legs complete set option 1, 2, 3 13 4
42
4
1
39
13
18
4 130/ 129
4
4, 5/ Legs complete set option 4, 5
13 4
144
4
4
1
81
13
. . 11 11.09.2024. 0: 50-, 280-
15 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
22
12 81
23
R
05
/ Installation
/ Removal
30
kg
. . 11 11.09.2024. 0: 50-, 280-
17 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
24
=
/ After the perimetr adjustment tighten the screws
25
4
26
1
10
616 8
1
101
27
. . 11 11.09.2024. 0: 50-, 280-
18 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
28
8*45 4
01 4
06 4
07
29
0.5-1cm
0.5-1cm
0.5-1cm
30
13
. . 11 11.09.2024. 0: 50-, 280-
19 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
31
Depending on complete set
2 14
32 09
/ Only for beds with removable cover
2 31
5-10cm
33
/
Only for beds with removable cover
1
2
3
/
Bring together the cover seams with the side bars corners
4
/ Fix the cover edges
5
/
Fix the cover upper edge on the corners
/ spread evenly the cover
on the side bars
/
Fix the cover wer edge
. . 11 11.09.2024. 0: 50-, 280-
20 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
34
06
35
06
06
36
. . /
Complete set and assembly sequence may be changed depending on lifting mechanism modication. See Base Certicate
2
17
. . 11 11.09.2024. 0: 50-, 280-
21 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
37
. ( ) . . , . , . : 1. . . 2. . 3. . .
Do not try to fold gas spring prior to being installed on the article. Gas
springs folding without any mattress on the frame is prohibited and
traumatic.When folding beds for the rst time in some cases a light effort is
required. Close the frame without fear of damaging shock absorber. If the
frame is not closed with two gas springs installed, it may be connected with
underweight of bought mattress it is recommended: 1. Remove one of the gas
springs lower the bed frame with mattress installed on. 2. Same procedure
shall be performed with second gas spring. 3. Install both of gas springs on
the lifting mechanism and lower the frame. This will remove difculties with
bed folding.
4
1
2
. . . Complete set and sequence of assembly may be changed depending on
lifting mechanism modication. See Base certicate.
: 1. ; 2. ; 3. ; 4. .
To remove gas absorber: 1. Put at screwdriver under the xing metal staple; 2.
Lift the staple up; 3. Remove the absorber xing from the stud; 4. Repeat this
from the lower part.
38
4
18
4
8 81
. . 11 11.09.2024. 0: 50-, 280-
22 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
39
40
If necessary material sample may be cut off ot put under removable cover
41
/ Width / Weight
<120 cm
5-30 kg
140-200 cm
10-50 kg
. . 11 11.09.2024. 0: 50-, 280-
23 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
42
43
2 Rubbing parts lubrication shall be performed not less than twice a year
44
. . 11 11.09.2024. 0: 50-, 280-
24 Instructions for furniture assembling. Bed with lifting mechanism. Version
11 from 11.09.2024 For sidebars types0: 50-, 280-
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>