IKEA 105.045.47 BETTORP LED Mobile Lamp Wireless Charger Instruction Manual

IKEA 105.045.47 BETTORP LED Mobile Lamp Wireless Charger

Features

• Wirelessly rechargeable lamp.
• Certified according to specification Qi 1.2.4 BPP.
• 3 levels of dimming: 150lm/60lm/18lm.
• LED status indicator.

Instructions for use

This lamp can be recharged by a wireless charger. After being fully charged, it can be turned on for up to 6 hours.

• Before using the lamp for the first time, remove the outer base cover and remove the battery box lid.
• Insert 4 x 1.2V AA/HR6 NiMH batteries (not included) with correct polarity.
• Close the lid and put back the outer cover on the lamp base.
• Attach the shade at the top.
• The lamp is now ready for use.

Charging

• ChargingFor wireless charging, place the device to be charged on top of the plus sign (+) on the charger. The device must be placed directly over the plus sign (+) on the charger for the charging function to work optimally.
• If your battery is completely discharged, it may take a few minutes before it starts charging. This is entirely normal.
• The LED charging indicator on the lamp will alternate between flashing red and green in case of wrong battery types or incorrect polarity.

Note!
Never use abrasive cleaners or chemical solvents since this can damage the product.

Save these instructions for future use.

WARNING:

• Only use the product in dry locations.
• Children should be supervised to ensure they do not play with the product.
• Do not subject the product to wet, moist or excessively dusty environments since this can cause damage to the unit.
• If the product is damaged, it should be disposed of.
• Only to be used with Qi-certified chargers.

Product servicing

Do not attempt to repair this product yourself.
If you open or remove parts, you may expose yourself to dangerous voltage points or other risks.
Recommended battery types:
4 x IKEA LADDA 2450 (AA/HR6, 1.2V, 2450mAh, Ni-MH) (not included). Use only Ni-MH type batteries. Do not use Alkaline, Carbon Zink or other similar battery types. Do not mix batteries of different capacities, types or date stamps. Remove the batteries if the product is to be stored for a long time or before it is scrapped.

Technical data

Type: E2022 BETTORP Input: 5.0V DC/4 x 1.2V AA/HR6 Ni-MH Estimated charging time: 4-5 h Estimated battery time: 6 h at 100% brightness Brightness: 150lm/60lm/18lm Indoor use only

Manufacturer: IKEA of Sweden AB Address: Box 702, SE-343 81 Älmhult, SWEDEN The ‘Qi’ symbol is a trademark of the Wireless Power Consortium

DISPOSAL
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>