v2 RF Power Meter

“`html

Product Information

Specifications:

• Product Name: RF Power Meter v2

• Meter Versions: v2

• Display Modes: Meter Display, PowerScope Display, Sniffer
  Display

• Signal Type: RF

• Frequency Range: Not specified

• Accuracy: Not specified

Product Usage Instructions:

Meter Display Mode:

In Meter Display Mode, the RF Power Meter v2 shows the current
power level of the RF signal being measured.

Setup Menu:

Access the Setup Menu to configure settings such as units (dBm
or mW) and display brightness.

PowerScope Display Mode:

Switch to PowerScope Display Mode to visualize the power
spectrum of the RF signal for detailed analysis.

Sniffer Display Mode:

The Sniffer Display Mode allows you to detect and analyze RF
signals in the vicinity.

Calibration:

Ensure accurate measurements by calibrating the RF Power Meter
v2 periodically as per the provided instructions.

Conducted vs. Radiated Power:

Understand the difference between conducted and radiated power
measurements for proper usage of the meter.

Signal Frequency:

Take note of the signal frequency being measured to ensure
compatibility with the RF Power Meter v2.

FAQ:

How Accurate Is the RF Power Meter v2?

The accuracy of the RF Power Meter v2 is not specified in the
manual. It is recommended to calibrate the meter regularly for
reliable measurements.

What is the Best Way to Measure Signals >1 Watt?

For signals above 1 Watt, it is advisable to use an attenuator
to prevent damage to the meter. Consult the manual for guidance on
selecting the appropriate attenuator.

How Does Signal Type Affect Measurement?

The RF Power Meter v2 is designed for RF signals. Ensure that
the signal type matches the capabilities of the meter for accurate
readings.

“`

RF Power Meter v2 Manual (EN)

RF Power Meter v2
­ Introduction
Meter Versions Meter Display Mode Setup Menu PowerScope Display Mode Sniffer Display Mode A Word on Calibration Think in dBms, not mW! Conducted vs. Radiated Power How Does The Meter Work?
How Accurate Is It? Harmonics Attenuator Leakage Signal Type Signal Frequency
Measuring Vtxs >1Watt As described in the previous s… What you want to buy is an att… If a 3dB attenuator is used you… Take note that when you make… Best way to do that is to use a … Now repeat this same measur…

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>