LYNX pro Audio V28 Passive Two Way Column Speaker Owner’s Manual
- September 18, 2024
- Lynx Pro Audio
Table of Contents
LYNX pro Audio V28 Passive Two Way Column Speaker
Specifications
- Model: Ionic V28
- Speaker Type: Two-way passive column speaker
- Frequency Response: 80 Hz – 20 KHz (-6dB)
- Power Handling: 560W (1120W program, 2240W peak)
- Max SPL: 126 dB / 132 dB peak
- Connectivity: 1 x Neutrik NL4MP / 4 poles PHOENIX connector
- Construction: 9mm birch plywood
- Dimensions: 1004 x 118 x 149 mm (H x W x D)
- Weight: 12 Kg (26.5 lbs)
Product Usage Instructions
Installation:
- Place the Ionic V28 column speaker in the desired indoor location.
- Ensure proper power supply from the subwoofer unit with the included DSP.
- Connect the speaker using the provided Neutrik NL4MP connector for optimal performance.
Setup and Configuration:
- Adjust the DSP presets on the subwoofer unit to match your sound application needs.
- Position the speaker vertically for enhanced directivity thanks to the waveguide technology.
Maintenance:
- Clean the speaker cabinet and grille regularly with a soft, dry cloth.
- Avoid exposing the speaker to excessive moisture or extreme temperatures to prolong its lifespan.
FAQ:
Q: Can the Ionic V28 be used outdoors?
A: The Ionic V28 is designed for indoor installations. For outdoor use,
consider the Outdoor suitable models in the Ionic series like the Ionic-5CXv.
Q: How do I power the Ionic V28 speaker?
A: The Ionic V28 is powered from the subwoofer units which include a DSP
offering different presets. Ensure proper connectivity using the provided
Neutrik NL4MP connector.
lonic Series
The lonic series is Lynx Pro Audio’s answer to light, portable or permanent
installation column speakers.
The lonic series comprises four full-range modular columns (two of them
Outdoor suitable), one coaxial speaker and two subwoofers.
These columns are very low profile, versatile,aesthetically pleasing and are
designed for reverberant installations where intelligible, clear voice
reproduction is paramount and where a low profile,discreet column is required.
The full-range columns can be powered from the active subwoofers and also
offer various preset configurations from the integrated DSP.
Available in a variety of colours, with the full range cabinets finished in
anti-rust steel and the subs finished in rugged, premium birch plywood, coated
with polyurea. All protected by front steel grilles and backed with a special
triple layer, acoustical textile which allows greater air flow and reduces
heat and humidity.
FEATURE
- Compact & versatile
- Powered from the sub bass unit
- DSP presets for various applications
- Weather proof components
- Easy to use, easy to install
- Portable
- Available in RAL colours by request and water-vinyl customization
- Outdoor suitable
The Ionic-V28 is a two-way passive column speaker part of the Ionic series.
This column is oriented to contain high fidelity voice and has more vertical
directivity thanks to the waveguide.
It is the newest and most powerful column system in the series and it is ideal
for indoor installations. Water-based paint available in several colors.
Powered from the subwoofer units which include a DSP offering different
presets to cover a wide range of sound applications.
TECHNICAL DATA
-
Components
Low/mid: 8 x 4″ speakers with 1″ voice coil
High: 1 x1″ exit on waveguide -
Frequency Range
80 Hz – 20 KHz (-6dB) (processed) -
Sensitivity*
99 dB (1W@lm) -
Max. SPL**
126 dB / 132 dB peak -
Coverage
100° H x 25° V -
Rated Power (AES)
560 W (1120 W program, 2240 W peak) -
Nominal Impedance
16 Ω -
Connectors
1 x Neutrik NL4MP / 4 poles PHOENIX connector -
Finish
Water-based paint -
Material
9 mm birch plywood -
Dimensions
1004 × 118 × 149 mm (H x W x D) -
Weight
12 Kg (26.5 lbs)
2,83v@1m Pink noise with 12 dB crest factor processed.
Calculated based on power rating and measured sensitivity processed.
Applications: PA system, clubs & theatres, houses of worship, public buildings, commercial complex; solo artists, band & DJ.
Oceanografic in Valencia, Spain
One of the most important marine complexes in the world, integrated in the
City of Arts and Science. This park has 10 ionic-100 column speakers in the
dolphinarium, including the roof of the amphitheater and the borders of the
dolphin pool.
Software
Prediction, control, DSP updates, management system…all our software are designed in-house and are a fundamental part of the Lynx Pro Audio technology. They are designed by and for sound technicians, with a very intuitive interface easy to use.
Masters of DSP technology and one of the few companies in the world that develops its own digital processing systems. This allows us to control all internal processing, from gain to crossover, dynamics, etc.
Online Control System (OCS)
Control and monitoring software for multiple devices (loudspeakers, amplifiers
and processors).
Allows control via Ethernet / USB for Lynx Pro Audio systems with integrated
DSP.
It controls the powered cabinets in real time and obtain detailed information
of cabinet behavior.
ARK Software
The ARK software works via USB or Ethernet (cable or wireless) and is the
interface to configure all the parameters of the range of processors ARK-70
and ARK-20 series.
The ARK software has been completely designed at the Lynx Pro Audio laboratory
by our own engineers. It allows you to configure every one of the parameters
in the processor, being in “Real Time” or “Offline”, storing them in the
processor via the USB interface or ETHERNET.
Cabinet Updater
Connect the cabinet by USB to your PC. The Cabinet Updater software will
automatically detects your cabinet hardware and updates the presets to the
latest and optimum configuration available.
Rainbow 3D
Rainbow 3D is an electro-acoustical prediction software for loudspeaker
systems, boasting comprehensive high-speed simulation in a three-dimensional
environment. With a sophisticated design, Rainbow 3D stands out for its speed,
being able to do a simulation in a few seconds.
Thanks to this software you will be able to “virtually” determine the
acoustical response of one or various cabinets at the same time.
Online Control System (OCS)
OCS is our control software, working in real time for all our digital processing systems. It is a user interface enabling the set-up of all digital devices in an installation.
With OCS you can configure / monitor all the parameters of a self-powered Lynx Pro Audio system (input levels, cabinet angles, module temperature, compression levels…), all parameters available in our processors and all settings for our HPX amplifiers, from the input sensitivity to the digital process for each channel independently. You can change the preset,gain, mute and polarity, activate the weather compensation and the SOLO mode.
OCS enables configuration from one single software system for all devices connected to an Ethernet network and incorporates direct communication with Smaart(R) measurement system. Through our Smart Link we can connect to any of Smaart(R) session connected to the local network. This allows us to see, in real time, the captured measurement directly in our process window.
Control and monitoring software for multiple devices (loudspeakers, amplifiers and processors). Allows control via Ethernet / USB for Lynx Pro Audio systems with integrated DSP.
-
Who is it for?
Users of Self powered DSP incorporated Lynx Pro Audio Cabinets where the user has requested the cabinets to be supplied with the Ethernet Module kit. -
What is it for?
Obtain detailed information of cabinet behaviour and monitor the cabinet/s in real time through the users PC so you can control online a single cabinet or a complete cabinet system from the OCS window. You can apply a Parametric EQ with 6 filters totally configurable, insert a delay up to 90 ms, change the preset, gain, mute, polarity and phase of every cabinet connected. You can also activate the air absorption compensation and select the «SOLO» mode. -
How does it work?
Via Ethernet (cable or wireless). Once installed, the OCS software automatically detects all the cabinets connected to the network and displays them in the OCS window on the users PC. -
What does it show?
As well as displaying the cabinet model and IP address the OCS will be monitoring in real time and the user will be able to view RMS levels, compression and output levels per way, delay, EQ, power module temperature, air absorption compensation and cabinet angulation.
Rainbow 3D Electroacoustical prediction software
Rainbow 3D is an electro-acoustical prediction software for loudspeaker
systems,boasting comprehensive high-speed simulation in a three-dimensional
environment.
With a sophisticated design, Rainbow 3D stands out for its speed, being able
to do a simulation in a few seconds.
Being a technology that has been developed in-house by our engineers, we are
able to adapt to the needs of our clients, make improvements when necessary
and develop new tools. Rainbow 3D is an ongoing project that will be
constantly adding new features.
Designed from scratch by professionals
Despite the existence of the previous Rainbow 2D, this new software has been
coded from scratch by our engineers in order to achieve an ultra-fast
simulation and to create a visually rich 3D environment. The simulation takes
advantage of all cores in the computer using multi-threading techniques for
optimised calculation speed.
The program can simulate all Lynx Pro Audio’s acoustic enclosures located in a
3D space.
New spherical measurements of the loudspeakers have been performed. with up to
one degree of accuracy, in the recently built anechoic chamber.
Complex-shaped surfaces
The program can simulate all Lynx Pro Audio’s acoustic enclosures located in a
3D space.
including the classic side and top views. It can also define multiple
listening zones and allows offset positioning and symmetry.
You can create complex-shaped surfaces as listening zones (venues):
trapezoidal forms.
semicircles, circles, rectangles and other asymmetrical forms. Each corner in
a 4-vertex surface is independently definable as straight or round.
Blueprints, textures and ornaments
Blueprints can be loaded and used as a reference point or template on which
reproduce the venue more closely to reality.
Furthermore, you can add textures and ornaments (decorative 3D objects) that
you will find in the library to make the project more realistic and visually
appealing.
Create projects with endless zones
You can create customized designs using multiple edition and productivity
tools: create surfaces, duplicate, apply symmetry on X and Y, show/hide
surfaces, change dimensions. change position, change rotation, take
screenshots, etc.
Unlimited sound sources
Allows the acoustic simulation for an unlimited number of sound sources and
audio systems.
You can place as many systems (subwoofers, line arrays, columns and individual
cabinets) as you desire or you can create your own group of customized sound
systems.
Line arrays can be placed in stack or flown configuration. Also, you can
create clusters from any individual cabinet available in the library.
Create your own “Sound Systems”
You can select different models of cabinets from the library, create a group
with the desired configuration and save them as a sound system. In this way,
you can create a group of customized sound systems with your own
configurations and reuse them in other projects, saving time.
To make this possible, you will need to create a “system” file. This can be
integrated upon other projects with the “Load sound system from file” option
or you can import it directly into the library to get access whenever you need
it with the “Insert sound system” option.
When you create a Sound System, you can add a name, a description and you have
the chance to upload a picture.
Organisation by layers
To work in a more organized way you can create multiple layers, with different
names and colors to distinguish them. All elements within a layer can be
selected and/or moved among them. You can also lock a layer, delete it or
disable the speakers for simulation.
DSP process over sound sources
Adding DSP process to sound sources to make corrections and optimize sound,
using EQ filters, delay, gain and polarity inversion. In the near future,
direct communication with Lynx Pro Audio’s cabinets will be available.
Multiple measures and tools
Likewise, the R&D department is developing multiple measurements and analysis
tools for the calculated data. For example, adding virtual microphones that
show the frequency response in the points of location indicated.
Among other tools you will find a wizard to set up different line array
arragements, a tool for line array autosplay and a ruler to take measurements
(meters) in the 3D scene.
A PDF report can be generated with extensive information that includes 3D views of the project as well as a list of surfaces and loudspeakers with set- up data and EQ.
Follow us on
or visit our website www.lynxproaudio.com
More info at www.lynxproaudio.com
Lynx Pro Audio S.L
Calle 1. Pol. Ind. Picassent
Picassent, Valencia
46220 SPAIN
Tel: +34 961 109 601
Mail: info@lynxproaudio.com
Web: www.lynxproaudio.com