MAYTAG W11521159D Top Loading Washing Machine User Guide

: September 16, 2024
: Maytag

Table of Contents

MAYTAG W11521159D Top Loading Washing Machine
Step 1. ADD THE DETERGENT
Step 2. LOAD CLOTHES
ADDING LAUNDRY PRODUCTS
ADDING THE DETERGENT TO THE BASKET
CONTROL PANEL AND FEATURES
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MAYTAG W11521159D Top Loading Washing Machine

WARNING

Fire Hazard
Never place items in the washer that are dampened with gasoline or other flammable fluids. No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Doing so can result in death, explosion, or fire.

WARNING
To reduce the risk of fire, electric shock, or injury to persons read the IMPORTANT SAFETY INSTRUCTIONS, located in your appliance’s Owner’s Manual, before operating this appliance.

Step 1. ADD THE DETERGENT

Designed to use only HE (High Efficiency) detergents.

Step 2. LOAD CLOTHES

For best results, load garments in loose heaps evenly around the basket wall.

NOTE: See ADDING LAUNDRY
PRODUCTS (below) for more information on adding HE detergent, fabric softener, and/or bleach.

Step 3. PRESS POWER TO TURN ON THE WASHER

Step 4. SELECT THE THE DESIRED CYCLE FOR YOUR LOAD

Step 5. ADJUST CYCLE SETTINGS AND SELECT ADDITIONAL OPTIONS

Step 6. PRESS AND HOLD START/PAUSE TO BEGIN THE CYCLE

Not all cycles, settings, or options are available with all models.

ADDING LAUNDRY PRODUCTS

IMPORTANT: Using non-HE detergent will likely result in longer cycle times and reduced rinsing performance. It may also result in component malfunction and, over time, buildup of mold or mildew. HE detergents should be low-sudsing and quick-dispersing to produce the right amount
of suds for the best performance.

ADDING THE DETERGENT TO THE BASKET

Add a measured amount of HE detergent or single-dose laundry packets into the basket. If using oxi-type boosters, color-safe bleach, or fabric softener crystals, add them to the bottom of the washer basket before adding clothes.
NOTE : Follow the manufacturer’s instructions to determine the amount of laundry products to use.

ADDING LIQUID CHLORINE BLEACH
Do not overfill, dilute, or use more than 1 cup (236 mL). Do not use color- safe bleach or Oxi products.

ADDING LIQUID FABRIC SOFTENER

If you desire to use liquid fabric softener with this washer, Maytag suggests using the Downy Ball® dispenser. Pour a measured amount of liquid fabric softener into the Downy Ball® dispenser, pull the ring tightly to seal it, and place it on top of the load. Follow the manufacturer’s directions for the correct amount of fabric softener based on your load size. The Downy Ball® dispenser will automatically release the fabric softener at the correct time in the cycle. For questions on using the Downy Ball® dispenser visit www.downy.com.
NOTE: When using fabric softener, always use the Soil & Rinse knob to select a setting with ‘+Extra Rinse.’ This will ensure that no fabric softener remains on clothing after the cycle is finished.

ADDING LIQUID FABRIC SOFTENER MANUALLY
IMPORTANT: Select the Fabric Softener option on the control panel before starting a cycle. During the final rinse, wait until the washer has completed filling, and press the Start/Pause button to pause the washer. Lift the lid and add the recommended amount of liquid fabric softener. Close
the lid, press and hold the Start/Pause button to resume the cycle.

CONTROL PANEL AND FEATURES

Appearance may vary depending on the model.

POWER
Press to turn on/off or to stop/cancel a cycle.
CYCLE KNOB
Turn the knob to select the desired cycle.
START/PAUSE
Press and Hold the Start/Pause button for 1 second to begin the cycle. Press during a cycle to pause the cycle and unlock the lid.
NOTE: If the machine is spinning it may take longer to unlock the lid.
CYCLE MODIFIERS (Not all modifiers are available on all cycles)
TEMPERATURE
Turn the knob to modify the cycle’s available temperatures (Tap Cold, Cold, Cool, Warm, or Hot).
DEEP FILL
Use the Deep Fill knob to determine how much water you want to add to your wash cycle. Set it to Auto for the machine to automatically determine the optimal water level. Set it to Max for the maximum allowable water level for that cycle. Higher water levels can be used to reduce the likelihood of white residue on dark clothing.
SOIL AND RINSE
Use this knob to choose the soil level as well as the number of rinses desired. If using fabric softener, make sure to use the two topmost settings which add an Extra Rinse to the cycle.
EXTRA POWER
Turn the Extra Power knob to On for a boost in cleaning performance on any wash cycle.
NOTE: The Extra Power option will increase the duration of the cycle.
NOTE : If the washer detects an out-of-balance condition it may pause and attempt to correct the situation. During this time the Sense and Rinse/Spin status indicators will both briefly illuminate.
WARNING : Do not wash water-resistant or water-repellant-type clothing. Failure to closely follow these instructions may result in an abnormal vibrating and out-of-balance condition that could result in physical injury, property damage, and/or appliance damage.

MORE WATER WHEN YOU WANT IT AUTO-SENSING AND DEEP FILL

When you select Deep Fill-Auto, or Deep Fill-Auto + Extra Rinse, the washer will adjust the water level to the optimal amount for a High-Efficiency wash of the detected load size.
Select Deep Fill-Med, Max, or Deep Fill-Max + Extra Rinse to automatically add more water to your wash cycle.
It is recommended to use the Bulky Items cycle with the Deep Fill-Max option for loads where maximum water level is desired.
Expect longer cycle times due to extended fill duration when using the Deep Fill options besides Auto.

CHOOSING THE RIGHT CYCLE
A cycle guide for your washer can be found online at www.maytag.com. The document will help identify which cycle to choose for various load types as well as the default cycle options. For example, we recommend using the Normal cycle with Warm water for cotton, linens and
mixed-garment loads.

CLEANING WITH LESS WATER

The washer has been designed and optimized to provide a thorough cleaning using less water to conserve energy and resources. As the washer dampens and moves the load, the level of the items will settle in the basket. This is normal and does not indicate that more items should be added. IMPORTANT: You will not see a full basket of water as with older, less efficient washing machines. It is normal for some of the load to be above the water line.

PRE-TREATING AND SOAKING

Turn the cycle knob to Water Faucet and press and hold the Start Button to turn it on, press the Pause button or Power button to turn it off.
The faucet will automatically shut off after 10 minutes or when the maximum water level is reached.
Water will automatically drain if the water level becomes too high. Water will also drain after 10 minutes if the lid is left open or 3 hours if the lid is left closed.

For detailed installation instructions and maintenance information, winter storage, and transportation tips, please see the Owner’s Manual included with your machine.

ASSISTANCE OR SERVICE AND ADDITIONAL INFORMATION
For information on any of the following items, a full cycle guide, warranty, detailed product dimensions, or complete instructions for use and installation, please visit www.maytag.com/owners or in Canada www.maytag.ca/owners. This may save you the cost of a service call.

To speak with a customer service representative or if you have additional questions, call us toll-free at 1–800–344–1274, or in Canada call 1–800–807–6777.
You can write with any questions or concerns at:

United States
Maytag Brand Appliances
Customer Experience Center
553 Benson Road
Benton Harbor, MI 49022–2692

Canada
Maytag Brand Appliances
Customer Experience Centre
200–6750 Century Ave.
Mississauga, Ontario L5N 0B7
Please include a daytime phone number in your correspondence.