LIFESPAN KIDS LSK Basketball Connector Bracket to Suit Stanley Monkey Bars User Manual

September 16, 2024
LIFESPAN KIDS

LIFESPAN KIDS LSK Basketball Connector Bracket to Suit Stanley Monkey

Bars User Manual

IMPORTANT:

This product may contain sharp points and small parts prior to assembly. The owner’s manual contains safety, assembly, use and maintenance instructions. This product must be assembled by an adult who has read and understood these instructions. Keep the packaging away from children and dispose of all packaging before use.
For the installer and your children’s safety, it is important to fully read and understand the instructions and safety hazards before commencing the assembly of the product.

NOTE:

This manual should not be used to guide your purchasing decision. Your product, and the contents inside its carton, may vary from what is listed in this manual. This manual may also be subject to updates or changes. Updated manuals are available through our website at www.lifespankids.com.au.

GENERAL SAFETY INSTRUCTIONS

NOTE: This product is intended for outdoor domestic use only.

DANGER FOR CHILDREN

  • Children do not recognize potential dangers from this The unassembled product must be stored out of reach of children and pets.
  • This product may only be used with adult supervision at all
  • The packaging material is not suitable for children due to choking and suffocation

RISK OF INJURIES

  • Do not use the product if it is damaged or If it is damaged or defective, please contact a qualified technician.
  • Check the product before each use. Defective parts must be changed immediately as they can impair the function and the safety of the product.
  • Adhere to the weight loading and user at a time as specified on the product manual or website product specifications.
  • Use the product only on even and non-slipping Never use it near water and keep sufficient space around for safety.
  • Beware of moving parts such as the springs or elastics, which could catch your arms and legs. Do not place any objects or body parts in the product’s openings.

PRODUCT DAMAGE

  • Do not make alterations to the product. Only use original spare parts. Qualified technicians should only carry out repairs – improper repairs can lead to danger for the user. Use this product only as described in this manual.WARNING      3

ASSEMBLY ADVICE

  • The product should not be installed over concrete, asphalt or any hard

We recommend installing on grass area or dirt ground with playground wood- chips (mulch) or other impact absorbing ground cover on top (see page 6).

  • The assembly of the product must be done carefully and by an able-bodied adult. If in any doubt, ask a technically qualified person.
  • Before you start with the assembly, read the instructions
  • Remove all packaging materials and lay down all parts on an open space. This gives you an overview and simplifies the assembly procedure.
  • Check with the parts list that all parts are Dispose of the packaging material when the assembly is completed.
  • Beware that when using tools or doing technical work, there is always a risk of injuries. Assemble the product with care.
  • Create a danger free environment; for example, do not let tools lay around the Store the packaging material in a way that cannot cause any danger.
  • After installing the product according to the instruction manual, ensure all screws, bolts and nuts are correctly installed and tightened and that all joints are
  • Reasonable space must be kept between the product and possible sources of danger, such as other equipment swimming pools and fences.
  • The product must be assembled correctly before
  • Your play structure must be installed on a flat horizontal surface with a minimum of 2m between it and any structure or obstacle such as a fence, garage house, tree branches, cloths lines, or electric cables.
  • Modifications made to the original product shall be carried out according to the instructions of the manufacturer.
  • The product must always be used in a well-lit
  • Do not place anything under the
  • Use gloves during assembly and
  • Outdoor products should be equipped with devices to prevent displacement in strong wind conditions (e.g. steel bars in the ground or loads like sandbag or water bags).
  • In certain areas during winter, snow buildup and the low temperatures can damage the product. It is recommended to remove snow buildup and to store the product indoors.
  • We strongly recommend visual inspections every 3 months to ensure the integrity of the entire product. Replace any parts as necessary.

 GENERAL SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Installation

  • Carefully follow the manufacturer’s instructions for installing the basketball hoop
  • Ensure the adapter is securely fastened to the existing basketball hoop or
  • Regularly inspect the mounting hardware for any signs of looseness or

Proper Use

  • Only use the basketball hoop adapter for its intended
  • Do not hang or climb on the adapter, hoop, or

Supervision

  • Always supervise children while they are using the basketball
  • Educate children on the proper use of the basketball hoop, emphasizing the importance of not hanging on the rim.

Clear Playing Area

  • Keep the playing area around the basketball hoop clear of obstacles and tripping
  • Ensure the surface beneath the hoop is soft and impact-absorbing, such as rubber mats, mulch, or sand.

Weather Conditions

  • Regularly check the adapter for any damage caused by weather

SAFETY INSTRUCTIONS

Consumer Information Sheet for Playground Surfacing Materials

The US Consumer Product Safety Commission (CPSC) estimates that about 100 000 playground equipment-related injuries resulting from falls to the ground surface are treated annually in US hospital emergency rooms. Injuries involving this hazard pattern tend to be among the most serious of all playground injuries, and have the potential to be fatal, particularly when the injury is to the head. The surface under and around playground equipment can be a major factor in determining the injury-causing potential of a fall. It is self-evident that a fall on to a shock-absorbing surface is less likely to cause a serious injury than a fall onto a hard surface. Playground equipment should never be placed on hard surfaces, such as concrete or asphalt, and while grass may appear to be acceptable, it may quickly turn to hard-packed earth in areas of high traffic. Shredded bark mulch, wood chips, tine sand or the gravel are considered to be acceptable shock absorbing surfaces when installed and maintained at a sufficient depth under and around playground equipment.

Table B.1 lists the maximum height from which a child would not be expected to sustain a life- threatening head injury in a fall on to four different loose- fill surfacing materials if they are Installed and maintained at depths of 150 mm, 225 mm and 300 mm.
TABLE B.1: Fall height in millimetres from which a life-threatening head injury would not be expected.

TYPE OF MATERIAL DEPTH OF SURFACING MATERIAL

  150mm 225mm 300mm
Double Shredded Bark Mulch 1800 3000 3300
Wood Chips 1800 2100 3600
Fine Sand 1500 1500 2700
Fine Gravel 1800 2100 3000

However, it should be recognised that all injuries due to falls cannot be prevented, no matter what surfacing material is used.
It is recommended that a shock absorbing material extend a minimum of 1800mm in all directions from the perimeter of stationary equipment such as climbing frames and slides. However, because children may deliberately jump from a moving swing, the shock absorbing material should extend in the front and rear of a swing a minimum distance of twice the height of the pivot point measured from a point directly beneath the pivot on the supporting structure.
This information is intended to assist in comparing the relative shock- absorbing properties of various materials. No particular material is recommended over another. However, each material is only effective when properly maintained. Materials should be checked periodically and replenished to maintain correct depth as determined necessary for the equipment in question. The choice of
a material depends on the type and height of the playground equipment, the availability of the material in a particular area, and its cost.

 SAFETY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS

SET UP

NOTE:

This part is used for fitting a basketball board to LK206 Stanley Heavy Duty Monkey bars.

WARNING:

Small parts within the carton.
Keep away from children – choking hazard.

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals