Eurotec INC945591 Adjustable Pedestals Installation Guide
- September 16, 2024
- Eurotec
Table of Contents
Eurotec INC945591 Adjustable Pedestals
Installation
Adjustable pedestal ECO-Line
The ECO-Line series consists of four different height-adjustable base
pedestals. The adjustable pedestals ECO-Line:
Specifications
- Product Name: ECO-Line series Adjustable Pedestals
- Available Models:
- ECO S (Assembly height: 25-40 mm)
- ECO M (Assembly height: 35-65 mm)
- ECO L (Assembly height: 65-130 mm)
- ECO XL (Assembly height: 130-198 mm)
- Recommended Load-Bearing Capacity: 494 lbf (2.2 KN / pedestal)
- Slope Adjustment: 0% – 10% in steps of 0.5%
- Compatible Substructures: Aluminum, wood, composite
- Beam Width: Max. 70mm for ECO S, 90mm for ECO M, L, XL
Installation Guide
Adjustable pedestal ECO -Line
The adjustable pedestals and the components have a recommended load-bearing
capacity of 494 lbf (2,2 KN / pedestal).
In order to increase the bearing surface of the ECO S, the adjusting pedestal
can be combined with a suitable lower part.
To extend our ECO M ; ECO L and ECO XL pedestal to the full height, turn the upper part of the head clockwise and the lower counterclockwise. If the upper part of the head is already held in position by a profile, the height can be adjusted by rotating the lower head part.
To ensure a material separation between the floor covering and the adjustable pedestal, we recommend the use of roof protection cork under the adjustable pedestal
By turning it out, the adjustable pedestals can be adjusted to the exact right height
To increase the bearing surface of the ECO S, the adjustable pedestals can be combined with a suitable bottom part. The assembly height is increased by 2mm.
The adjustable pedestals ECO-Line are suitable for substructures made of aluminum, wood, and composite. The beam width of the proline pedestals is max. 2”3/4 inch (70 mm) for the ECO S and 3”1/2 inch (90 mm) for ECO M ; L and XL. All aluminum system profiles EVO; EVO-Slim and Eveco can be attached to the ECO-Line adjustable pedestals with screws
© by Eurotec, Inc. · Status 09/2018· Changes, additions, set, and printing errors reserved.
To compensate for a slope or unevenness in a laying area, we recommend the use of the Nivello 2.0 with the adjustable pedestals of the ECO-Line.
| ECO S|
---|---|---
Slope| Inches| mm
0% – 1%| 0”25/64 – 0”13/32| 10.00 – 10.25
2% – 3%| 0”13/32 – 0”27/64| 10.50 – 10.75
4% – 5%| 0”7/16| 11.00 – 11.25
6% -7%| 0”29/64 – 0”15/32| 11.50 – 11.75
8% – 9%| 0”15/32 – 0”31/64| 12.00 – 12.25
10%| 0”1/2| 12.75
| ECO M; L; XL|
---|---|---
Slope| Inches| mm
0% – 1%| 0”5/8 – 0”41/64| 16.00 – 16.25
2% – 3%| 0”21/32| 16.50 – 16.75
4% – 5%| 0”43/64| 17.00 – 17.25
6% -7%| 0”11/16 – 0”45/64| 17.50 – 17.75
8% – 9%| 0”45/64 – 0”47/64| 18.00 – 18.50
10%| 0”3/4| 19.00
The table shows the installation height of the adjustable pedestals of the
ECO-Line
To adjust the desired slope, the lever must be pulled upwards at the edge of
the Nivello 2.0. Now you can set the desired slope in 0.5% steps. The lever
locks in the respective position. It is possible to secure the lever with a
screw in the Nivello 2.0.
The installation height (see tables) must be taken into account when installing the system.
Eurotec, Inc. · 7418 Washington Avenue | Racine, WI 53406 · Office (+1) 262 254 9309 · email: info@eurotec.us · www.eurotec.us
FAQ
- Q: What is the recommended load-bearing capacity of the adjustable pedestals?
- A: The recommended load-bearing capacity is 494 lbf (2.2 KN / pedestal).
- Q: What substructures are suitable for the ECO-Line series adjustable pedestals?
- A: The adjustable pedestals are suitable for substructures made of aluminum, wood, and composite materials.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>