SENSTAR Multi Sensor User Guide
- September 15, 2024
- SENSTAR
Table of Contents
SENSTAR Multi Sensor
Product: Senstar MultiSensorTM
Specifications
- Model: MultiSensorTM
- Power over Ethernet (PoE) compatible
- Network Manager (NM) integration
- UCM (Unified Communications Manager) support
- Ethernet IP Address: 192.168.0.150
Product Usage Instructions
Setting up the Senstar MultiSensor
Ensure the MultiSensor is connected to a PoE switch with the correct IP
address (192.168.0.150).
Network Manager Setup
Access the Network Manager to configure and monitor the MultiSensor’s
network settings.
UCM Configuration
Adjust the height and detection zone settings in the UCM for optimal
performance.
Frequently Asked Questions (FAQ)
-
Q: How do I access the Network Manager?
A: You can access the Network Manager by visiting the following link: Senstar MultiSensor Help -
Q: What is the default IP address for the Senstar MultiSensor?
A: The default IP address for the MultiSensor is 192.168.0.150.
Senstar MultiSensor
Quick Start Guide
https://senstar.com/product-resources/multisensor-help
Copyright © 2024. All rights reserved. Senstar MultiSensor is a trademark of Senstar Corporation. E9DA0103-001 (07/24)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>