AQFORM FLATTRACK Surface System Installation Guide
- September 13, 2024
- AQFORM
Table of Contents
AQFORM FLATTRACK Surface System
WHAT IS IN THE BOX
Straight Flattrack Line Requirements
- End Cap
- Power Supply OR Power End Cap (External Power Supply)
Flattrack Connectors
- ‘T’ Connector
- ‘L’ Connector
- Wall-Ceiling Connector
- Straight Connector
Required Tools
- Screwdriver
Installation Steps
Step 1
Unpack the components and ensure all parts are included.
Step 2
- Position the track on the ceiling.
- Secure the track using screws.
- Ensure the track is level and properly aligned.
Turn off the power supply before proceeding.
Step 3
Connect the track power supply:
- Attach the power supply to the track.
- Secure the power supply with screws.
- Connect the power cables to the power supply.
Step 4
Install the end cap:
- Place the end cap on the track.
- Secure the end cap with screws.
Step 5
Connect the power supply box:
- Attach the power supply box to the track.
- Connect the power cables to the power supply box.
- Secure the power supply box with screws.
Turn on the power supply to test the installation.
Mechanical Connections
| ‘L’ Connection | ‘T’ Connection | Straight Connection | Wall-Ceiling Connection |
|---|---|---|---|
| Connect the ‘L’ connector to the track. | Connect the ‘T’ connector to the | ||
| track. | Connect the straight connector to the track. | Connect the wall-ceiling |
connector to the track.
Specifications
| Dimension | Value (mm) |
|---|---|
| Length | 292 |
| Width | 24 |
| Height | 20 |
| Power Supply Hole | 14 x 28 |
Power Box Dimensions
The power box dimensions are as follows:
- Length: 292 mm
- Width: 24 mm
- Height: 20 mm
- Power Supply Hole: 14 x 28 mm
FAQ
-
Q: What tools are required for the installation?
A screwdriver is required for the installation. -
Q: How do I connect the power supply?
A: Attach the power supply to the track, secure it with screws, and connect the power cables. -
Q: How do I install the end cap?
A: Place the end cap on the track and secure it with screws. -
Q: What are the dimensions of the power box?
A: The power box dimensions are 292 mm (length), 24 mm (width), 20 mm (height), and the power supply hole is 14 x 28 mm.
For further assistance, please contact AQFORM Inc. sp. z o.o. at ul. Przemysłowa 12-14, 32-070 Czernichów, Poland, or call +48 12 270 21 22.
AQUAFORM Inc. sp. z o.o. ul. Przemysłowa 12-14 | 32-070 Czernichów | Poland | +48 12 270 21 22 | info@aqform.com | www.aqform.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>