TPtech MGS101-05B Entertainment Tablet User Manual
- September 13, 2024
- TPtech
Table of Contents
TPtech MGS101-05B Entertainment Tablet
Product Function Description
| ① | Micro SD | ② | DC Jack |
|---|---|---|---|
| ③ | Pogo connector | ④ | Mini USB |
| ⑤ | 3.5mm Audio Jack | ⑥ | Power button |
| ⑦ | Speaker | ⑧ | Fan |
| ⑨ | battery LED | ⑩ | Power/WiFi LED |
Product Specification
| Project | Description |
|---|---|
| Dimension | 325.0(L) x 197.0(W) x 39.7(H)mm |
| CPU | Intel Celeron BayTrail-M N2807 Dual-core 1.58-2.17GHz |
| LCD panel | 10.1″ Screen(MiPi), Resolution 800X1280 WXGA; 10:16 Aspect Ratio, |
| Touch panel | Capacitive 10 Multi touch panel, I2C, IK07 hardness |
| Memory | 2GB DDR3L-On board BGA memory module |
| Storage | 64GBm-SATASSD,Supportto 1TB |
| Card Reader | Support Secure digital MSD card 8GB to 512GB |
| Front camera | 500MP+AF, MIPI interface (Option) |
| WI-FI | IEEE 802.11 a/b/g/n/ac Wireless card (Intel 7265 module) |
| Light bar | RGB LED.UART interface,5V operation voltage (Option) |
| Speaker | 2X speaker, rated resistance 8Q, rated power 0.6W,sensitivity |
92dB/5cm
G-sensor| Automatic screen orientation 3 axis
Fan| Dimension 45455mm, working voltage 5V, revolution speed 5200RPM,
noise 27dB
Rear I/O| lxmini USB(Host)； lxMicro SD； 1×3.5mm audio Jack； lxDC Jack
Pogo connector| 2x4pins,with DC IN; 2x6pins,with DC IN，LAN(10/100M) (Option)
Battery| Li-Lon 16000mAh, 7.4V, 118.4Wh, 20Hrs
Sleep function| Hall IC switch near pogopin-External magnet action
Power button| Power buttonxl
Operating System| Windows 8.1/ Android 8.1 (Option)
Regulations| FCC; SAR;CE; UKCA
RFID Tag
| 60X12.5Xlmm,with ground plane, white synthetic label, EPC class 1 gen 2V2;
866-868MHz(EU), 902-928MHz(US), IQ 150,Omni-ID (Option)
VESA mount| 75mmX75mm mounting hole
I/O cover| Rubber cover with Logo without button hole (Default)
Panel protector| PET film ,251.9X163.4X0.125mm (Option)
---|---
Weight| 1.8Kg(16000mAh，7.4V)
FCC STATEMENT
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuantto Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipmentand receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning : Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment
SAR WARNING
FCC RF Exposure Information and Statementthe SAR limit of USA (FCC) is 1.6
W/kg averaged over one gram of tissue. This Gaming tablet had been tested
against this SAR limit. This device was tested for typical body-worn
operations with the back of the device kept Omm from the body. To maintain
compliance with FCC RF exposure requirements, use accessories that maintain an
0 mm separation distance between the user’s body and the back of the device.
The use of belt clips, holsters and similar accessories should not contain
metallic components in its assembly. The use of accessories that do not
satisfy these requirements may not comply with FCC RF exposure requirements,
and should be avoided.
Guarantee Card
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>