MAYTAG W11436568 Top Loading Washing Machine User Guide

: September 12, 2024
: Maytag

Table of Contents

MAYTAG W11436568 Top Loading Washing Machine
Product Usage Instructions
CONTROL PANEL AND FEATURES
MORE WATER WHEN YOU WANT IT
CLEANING WITH LESS WATER
ASSISTANCE OR SERVICE AND ADDITIONAL INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MAYTAG W11436568 Top Loading Washing Machine

Specifications:

Model: Varies
Capacity: Varies
Energy Efficiency: High Efficiency (HE)
Water Levels: Auto, Max
Special Features: Extra Power, Deep Fill

Product Usage Instructions

Power Control:
Press the Power button to turn the washer on or off. To cancel a cycle, press the Power button. Ensure to read the IMPORTANT SAFETY INSTRUCTIONS in the Owner’s Manual before operating the appliance.
Cycle Selection:
Turn the Cycle Knob to select the desired wash cycle based on your laundry needs.
Starting and Pausing a Cycle:
Press and hold the Start/Pause button for 1 second to start a cycle. Press it during a cycle to pause the cycle and unlock the lid. Note that unlocking may take longer if the machine is spinning.
Cycle Modifiers:
- Temperature: Adjust the temperature settings using the Temperature knob for optimal washing results.
- Deep Fill: Set the Deep Fill knob to Auto or Max for water level selection, especially useful for reducing residue on dark clothing.
- Soil and Rinse: Use this knob to select soil level and number of rinses. Extra Rinse setting is recommended when using fabric softener.
- Extra Power: Turn on for enhanced cleaning performance, but note that it may increase cycle duration.
Adjusting Cycle Settings:
After selecting the cycle, adjust additional settings such as water level, soil level, and rinse options as needed.
Starting the Cycle:
Press and hold the Start/Pause button for 1 second to begin the selected cycle.

Choosing the Right Cycle:
Refer to the online cycle guide at www.maytag.com to identify the most suitable cycle for different types of loads. For example, Normal cycle with Warm water is recommended for cottons, linens, and mixed- garment loads.

Pre-Treating Before a Wash Cycle:
To pre-treat, turn the cycle knob to Water Faucet, then press and hold the Start Button to start. Press the Pause or Power button to stop the pre- treating process.

Frequently Asked Questions (FAQ):

Q: Can I use regular detergent instead of HE detergent?
A: No, this washer is designed to use only High Efficiency (HE) detergents for optimal performance.
Q: How do I prevent an out-of-balance condition during a wash cycle?
A: Avoid washing water-resistant or water-repellant clothing. Ensure garments are evenly distributed in the washer to prevent vibrations and out- of-balance issues.
Q: What should I do if the washer pauses during a cycle?
A: If the washer detects an out-of-balance condition, it may pause briefly to correct it. Wait for it to resume automatically or adjust the load if necessary.

MAYTAG® TOP LOADING WASHING MACHINE QUICK START GUIDE

WARNING

Fire Hazard

Never place items in the washer that are dampened with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in your appliance’s Owner’s Manual, before operating this appliance.

Step 1. ADD HE DETERGENT
Designed to use only HE (High Efficiency) detergents.
Step 2. LOAD CLOTHES
For best results, load garments in loose heaps evenly around the basket wall. NOTE : See ADDING LAUNDRY PRODUCTS (below) for more information on adding HE detergent, fabric softener, and/or bleach.
Step 3. PRESS POWER TO TURN ON THE WASHER NOTE: See ADDING LAUNDRY PRODUCTS (below) for more information on adding HE detergent, fabric softener, and/or bleach.
Step 4 . PRESS POWER TO TURN ON THE WASHER
Step 5. ADJUST CYCLE SETTINGS AND SELECT ADDITIONAL OPTIONS *****
Step 6. PRESS AND HOLD START/PAUSE TO BEGIN CYCLE

NOTE: Start button must be held for 1 second to start cycle.

Not all cycles, settings or options are available with all models.

ADDING LAUNDRY PRODUCTS

IMPORTANT: Using non-HE detergent will likely result in longer cycle times and reduced rinsing performance. It may also result in component malfunction and, over time, buildup of mold or mildew. HE detergents should be low-sudsing and quick-dispersing to produce the right amount of suds for the best performance.

ADDING HE DETERGENT TO BASKET
Add a measured amount of HE detergent or single-dose laundry packets into the basket. If using oxi-type boosters, color-safe bleach, or fabric softener crystals, add to the bottom of the washer basket before adding clothes.

NOTE: Follow the manufacturer’s instructions to determine the amount of laundry products to use.

ADDING LIQUID CHLORINE BLEACH
Do not overfill, dilute, or use more than 1 cup (236 mL). Do not use color- safe bleach or oxi products in the same cycle with liquid chlorine bleach.
ADDING LIQUID FABRIC SOFTENER TO DISPENSER
Pour a measured amount of liquid fabric softener into dispenser; always follow manufacturer’s directions for correct amount of fabric softener based on your load size. Dilute liquid fabric softener by filling the dispenser with warm water until liquid reaches the underside of the rim. See Max Fill line arrows.

NOTE : When using fabric softener, always use the Soil & Rinse knob to select a setting with ‘+Extra Rinse.’ This will ensure that no fabric softener remains on clothing after the cycle is finished.

CONTROL PANEL AND FEATURES

$MAYTAG-W11436568-Top- Loading-Washing-Machine- $12$$

Appearance may vary depending on model.
1. POWER
  Press to turn on/off or to stop/cancel a cycle.
2. CYCLE KNOB
  Turn knob to select desired cycle.
3. START/PAUSE
  Press and Hold Start/Pause button for 1 second to begin cycle. Press during a cycle to pause cycle and unlock lid.
  NOTE: If machine is spinning it may take longer to unlock lid.
4. CYCLE MODIFIER S (Not all modifiers are available on all cycles)

TEMPERATURE
Turn knob to modify the cycle’s available temperatures (Tap Cold, Cold, Cool, Warm, or Hot).=

DEEP FILL
Use the Deep Fill knob to determine how much water you want to add to your wash cycle. Set it to Auto for the machine to automatically determine the optimal water level. Set it to Max for the maximum allowable water level for that cycle. Higher water levels can be used to reduce the likelihood of white residue on dark clothing.

SOIL AND RINSE
Use this knob to choose the soil level as well as the number of rinses desired. If using fabric softener, make sure to use the two topmost settings which add an Extra Rinse to the cycle.

EXTRA POWER
Turn the Extra Power knob to On for a boost in cleaning performance on any wash cycle.
NOTE: The Extra Power option will increase the duration of the cycle.
NOTE: If the washer detects an out-of-balance condition it may pause and attempt to correct the situation. During this time the Sense and Rinse/Spin status indicators will both briefly illuminate.
WARNING: Do not wash water-resistant or water-repellant-type clothing. Failure to closely follow these instructions may result in an abnormal vibrating and
out of-balance condition that could result in physical injury, property damage, and/or appliance damage.

CHOOSING THE RIGHT CYCLE

A cycle guide for your washer can be found online at www.maytag.com. The document will help identify which cycle to choose for various load types as well as the default cycle options. For example we recommend using the Normal cycle with Warm water for cottons, linens and mixed-garment loads.

PRE-TREATING BEFORE A WASH CYCLE

Turn the cycle knob to Water Faucet and press and hold the Start Button to turn on, press the Pause button or Power button to turn off.

Turn the cycle knob to Water Faucet and press and hold the Start Button to turn on, press the Pause button or Power button to turn off.
Faucet will automatically shut off after 10 minutes or when max water level is reached.
Water will automatically drain if water level becomes too high. Water will also drain after 10 minutes if the lid is left open or 3 hours if the lid is left closed.

MORE WATER WHEN YOU WANT IT

AUTO SENSING AND DEEP FILL

When you select Deep Fill-Auto, the washer will adjust the water level to the optimal amount for a High-Efficiency wash of the detected load size.
Select Deep Fill – Med, High or Max to automatically add more water to your wash cycle.
It is recommended to use Bulky Items cycle with Deep Fill – Max option for loads where maximum water level is desired.
Expect longer cycle times due to extended fill duration when using the Deep Fill options besides Auto.

CLEANING WITH LESS WATER

The washer has been designed and optimized to provide a thorough cleaning using less water to conserve energy and resources.
As the washer dampens and moves the load, the level of the items will settle in the basket. This is normal, and does not indicate that more items should be added. IMPORTANT: You will not see a full basket of water as with older, less efficient washing machines. It is normal for some of the load to be above the water line.

For detailed installation instruction and maintenance information, winter storage, and transportation tips, please see the Owner’s Manual included with your machine.

ASSISTANCE OR SERVICE AND ADDITIONAL INFORMATION

For information on any of the following items, a full cycle guide, warranty, detailed product dimensions, or for complete instructions for use and installation, please visit www.maytag.com/owners or in Canada www.maytag.ca/owners. This may save you the cost of a service call.

$MAYTAG-W11436568-Top- Loading-Washing-Machine- $15$$

To speak with a customer service representative or if you have additional questions, call us toll free at 1–800–344–1274 or in Canada call 1–800–807–6777.
You can write with any questions or concerns at:

United States: