MAYTAG W11678279C Washer User Guide
- September 12, 2024
- Maytag
Table of Contents
MAYTAG W11678279C Washer
PRODUCT REGISTRATION & OWNER INFORMATION
Find your serial tag on your product, as shown in the diagram.
OPERATING INSTRUCTIONS
WARNING
Fire Hazard
Never place items in the washer that are dampened with gasoline or other
flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on it (including cooking
oils). Doing so can result in death, explosion, or fire.
-
Add HE Detergent & Laundry Products to Dispenser then close the dispenser drawer.
-
Sort & load laundry loosely, then close the door.
-
Touch Power to Turn On the Washer.
-
Select the Desired Cycle for your Load.
-
Adjust Cycle Setting, if desired.
-
Select Additional Options.
-
Touch and Hold Start/ Pause to Begin Cycle.
NOTE: Before washing clothes for the first time, add liquid or powdered HE detergent to the detergent dispenser. Choose the Quick Wash cycle and run it without clothes. Use only HE detergent. This initial cycle serves to ensure the interior is clean and the dispenser drawer is ready for use before washing clothes. NOTE: Not all cycles, settings or options are available with all models.
CHOOSING THE RIGHT CYCLE
NOTE: Normal cycle with Warm water is recommended for cottons, linens and
mixed garment loads.
CLEANING THE PET FILTER
-
Pinch the filter at the cut out and push away to remove the filter.
-
Clean filter as needed. Remove pet hair from outside of filter. More or less pet hair will be in the filter depending on the load size and pet hair type. Open cover to remove hair inside of filter.
-
Place filter back by pinching the filter at the cut out and pull forward to lock in place.
CUSTOMER SUPPORT
®/™ ©2024 Maytag. All rights reserved. Used under license in Canada.
References
- Service & Support Owners Center | Maytag
- Mes produits service et soutien | Maytag
- Service & Support Owners Center | Maytag
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>