MOTOROLA SOLUTIONS MXM600 Mobile Radio User Guide
- September 13, 2024
- Motorola Solutions
Table of Contents
MXM600 Mobile Radio
“`html
Specifications:
-
IP Rating:
-
Dash/Desk Mount Control Head and Remote Ethernet Control Head:
IP54 -
Telephone Style Control Head: IP55
-
IP67 Remote Ethernet Control Head: IP67
-
-
Control Head Features:
- Large Rotary Control Knob
- Emergency Button
- Keypad with 15 Programmable Buttons
- Status LED
- Soft Key Buttons
- Micro USB Port
-
Connectivity Ports:
- Ethernet RJ50 Connector
- RJ50 Connector for SIM Port and RJ45 Ethernet
- 9-Pin SubD Connector (RS232)
- 25-Pin SubD Connector
- TETRA Antenna Port
- Bluetooth/Wi-Fi Antenna Port
- GNSS Antenna Port
- Power Connection
- 26-Pin Accessory Connector
Product Usage Instructions:
Cleaning:
To clean your radio, use a moistened or antistatic cloth.
Attaching the Antenna:
-
Connect the external Bluetooth/Wi-Fi antenna cable to the
Bluetooth/Wi-Fi antenna port of the transceiver. Tighten the cable
connector head to the transceiver. -
Connect the external GNSS antenna cable to the GNSS port of the
transceiver. Tighten the cable connector head to the
transceiver. -
Connect the external TETRA cable to the TETRA LMR port of the
transceiver. Turn the connector head of the cable to lock the cable
to transceiver.
Inserting the TETRA SIM Card:
-
Flip open the TETRA SIM card dust cover on the
transceiver. -
Insert the TETRA SIM card into the card slot. Ensure that the
gold contact area is facing downward. -
Close the TETRA SIM card dust cover. Ensure that the SIM card
dust cover is closed completely.
Installing the Control Head:
- Attach the Transceiver and Dual Remote Expansion Head.
- Use Ferrite clamp for secure installation.
- Connect Remote Mount RJ50 Ethernet Cable.
- Choose between Telephone Style Control Head and Remote Ethernet
Control Head for control interface.
FAQ:
How do I turn on the radio?
To turn on the radio, press and hold the Power button.
How do I select options on the screen?
To select the options displayed on the screen, press the soft
key.
How do I turn off the radio?
To turn off the radio, [instruction to be completed from user
manual].
“`
MXM600
QUICK START GUIDE
www.motorolasolutions.com
Knowing Your Radio
Control Head Overview
Remote Ethernet Control
Head
98
1 2
3
4
IP67 Remote Control
Head
98
1 2
3
4
Telephone Style Control Head (TSCH)
1
2
5
5
7
9 4 5
8
6
1 Large Rotary Control Knob
2 Emergency Button
3 GCAI MMP Dust Cover
4 Keypad with 15 Programmable Buttons
5 Status LED
6 Screws
7 Horizontal or Vertical Display
8 Power Button 9 Soft Key Buttons
10 Micro USB Port
Home Screen Overview
Veritcal Display
Horizontal Display
1
2
1 Status Icon Area 2 Display Area
3
3 Soft Key Area
3
Transceiver Overview Front View
Single Remote
Dual Remote
Top View
1
Data Box
1
23
Dash/Desk Mount
17
5 6
7
1
4
3
Side View
9 17 8 9
Rear View
1 Ethernet RJ50 Connector (for Remote Control Head)
2 RJ50 connector for SIM Port and RJ45 Ethernet
3 9-Pin SubD Connector (RS232)
4 25-Pin SubD Connector
5 Large Rotary Control Knob 6 Emergency Button 7 GCAI MMP Dust Cover
8 Keypad with 15 Programmable Buttons
9 Status LED
10 TETRA Antenna Port
11 Bluetooth/Wi-Fi Antenna Port
12 GNSS Antenna Port
13 Power Connection
14 26-Pin Accessory Connector
15 TETRA SIM Card Dust Cover
16 Trunnion Mounting Guide Point
17 Soft Key Buttons
Getting Started
Looking After Your Radio
Never leave your Control Head in extreme temperatures (over +85° C), for
example, behind a windscreen in direct sunlight.
The Dash/Desk Mount Control Head and Remote Ethernet Control Head is protected
against dust and water sprays (compliant with the IP54 rating). The Telephone
Style Control Head is protected and compliant with the IP55 rating. The IP67
Remote Ethernet Control Head is protected and compliant with the IP67 rating.
To clean your radio, use a moistened or antistatic cloth.
Attaching the Antenna
1. Connect the external Bluetooth/Wi-Fi antenna cable to the Bluetooth/Wi-Fi
antenna port of the transceiver. Tighten the cable connector head to the
transceiver.
2. Connect the external GNSS antenna cable to the GNSS port of the
transceiver. Tighten the cable connector head to the transceiver.
3. Connect the external TETRA cable to the TETRA LMR port of the transceiver.
Turn the connector head of the cable to lock the cable to transceiver.
Inserting the TETRA SIM Card
1. Flip open the TETRA SIM card dust cover on the transceiver. 2. Insert the
TETRA SIM card into the card slot. Ensure that the gold
contact area is facing downward. 3. Close the TETRA SIM card dust cover.
Ensure that the SIM card
dust cover is closed completely.
Installing the Control Head
1 2
1 Transceiver
2 Dual Remote Expansion Head
3 Ferrite clamp
4 Remote Mount RJ50 Ethernet Cable
5 Telephone Style Control Head
6 Remote Ethernet Control Head
www.motorolasolutions.com
More Information on the Radio
Visit the Motorola Solutions web site or scan the QR code:
http://www.motorolasolutions.com/
Learning Experience Portal
User documentation available at: https://learning.motorolasolutions.com/
Open Source Software Legal Notices
Available in Integrated Terminal Management (iTM)
This document is copyright protected. Duplications for the purpose of the use
of Motorola Solutions products are permitted to an appropriate extent.
Duplications for other purposes, changes, additions or other processing of
this document are not permitted. Only this electronically-saved document is
considered to be the original. Duplications are considered merely copies.
Motorola Solutions, Inc., and its subsidiaries and affiliates do not vouch for
the correctness of such kinds of copies. MOTOROLA, MOTO, MOTOROLA SOLUTIONS
and the Stylized M Logo are trademarks or registered trademarks of Motorola
Trademark Holdings, LLC and are used under license. The Bluetooth® word mark
and logos are registered trademarks owned by the Bluetooth SIG, Inc. and are
used under license. All other trademarks are the property of their respective
owners. © 2024 Motorola Solutions, Inc. All rights reserved.
MN009995A01-AA
MN009995A01
Printed in
MXM600 QUICK START GUIDE
www.motorolasolutions.com
Using the Radio
Turning the Radio On
To turn on the radio, press and hold the Power button.
Soft Keys
To select the options displayed on the screen, press the soft key.
Turning the Radio Off
To turn off the radio, press and hold the Power button.
Entering Emergency Operation
Press and hold the Emergency button. NOTE: If the terminal is turned off,
press and hold the Emergency button to turn on the terminal in Emergency
Operation (if configured by your Service Provider).
Rotary Knob Functions
The service provider can program the Rotary Knob to perform one of the
following functions:
Dual Control – The knob is used as a volume control and for scrolling through
lists. Press the knob to switch between volume and list (default programming).
List Control – The knob is used to scroll through lists or menu items. Volume
can then only be adjusted through the menu or external accessory.
Volume Control – The knob is used to adjust the volume. Press and hold the
Rotary Knob to lock or unlock the volume setting.
Menu Key
Pressing the Menu button allows you to enter the following functions: Menu
(when there is no ongoing activity): The menu allows you to control your
terminal settings. Menus are organized in a hierarchy. The menu options
provide access to the sub-menu.
The context sensitive menu (when the context sensitive icon is on): This
function allows you to view a list of items for the current menu.
Locking or Unlocking Keys
Press the Menu button, and then the * button.
Unlocking the Terminal
Enter the unlock code at the prompt. NOTE: The default unlock code is “0000”.
Ask your service provider if the default code is changed when receiving your
terminal.
Selecting Trunked or Direct Mode Operation
From the Home screen, press Options, and then select Trunked Mode or Direct
Mode.
Selecting Gateway or Repeater Mode Operation
In Gateway Mode, your termnial connects DMO and TMO. In Repeater Mode, your
terminal extends the DMO range by enhancing the received information. 1. From
the Home Screen, press the Options button. 2. Select either Gateway Mode or
Repeater Mode.
Sending a New Message
1. Press the Menu button and select Messages > New Message. 2. Enter your
message. 3. Select a contact to send your message. 4. Select Send or press the
Send key.
www.motorolasolutions.com
Indication
Sending Status Messages
1. Select a group. 2. Press the Menu button and select Messages > Send
Status. 3. Select a status and press the Send key or PTT buton.
Making TMO or DMO Group Calls
1. Select TMO or DMO mode. 2. From the Home screen, select a group and press
Select. 3. Press and hold the PTT button. 4. Release the PTT button to listen.
Making TMO or DMO Emergency Group Calls
1 Select a TMO or DMO mode. 2. Press and hold the emergency button. 3. Press
and hold the PTT button. 4. Release the PTT button to listen.
NOTE: If you are using the Hot Mic feature, wait for the Emgcy Mic On message
to appear on the display and talk without pressing the PTT button. 5. To exit
Emergency Mode, press and hold the Exit soft key.
Making Simplex Private Calls
1. From the Home screen, dial a number. 2. Press and release the PTT button.
3. When the receipient answers, wait for their response to finish. 4. Press
the end End key to terminate the call.
Making Duplex Private Call/Phone/PABX Calls
1. From the Home screen, press and release the Send key. 2. When the ringing
sounds, the called party answers. 3. Press the End Key to terminate the call.
LED Status Indicator
Indication
Status
Solid green
In use Repeating call
Control head update, downgrade, or language change successful
Blinking green
In service or idle Switching modes from TMO to DMO
Solid red Blinking red
Out of service Radio checks for software update (OTAP over Wi-Fi) failed
Failure or error detected during control head programming
Connecting to a network Switching modes from DMO to TMO
Solid orange Blinking orange
Radio is powering on Transmit inhibit mode in service Channel busy in DMO
Radio interference in DMO
Incoming call Programming control head
No indication
Red and orange interchanging
Radio powered down
Radio does not detect Certificate Enrollment
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>