Powerffy N10 Cordless Vacuum Cleaner Instructions
- September 11, 2024
- Powerffy
Table of Contents
Powerffy N10 Cordless Vacuum Cleaner
KNOW YOUR PRODUCT
INSTALLATION
Battery Pack Installation
Take the battery and push it forward into the slot. the latch goes into the slot and locks with a clicka.
Dust Cup Installation
Note: The dust cup can only be installed and removed when the battery pack is removed.
Install the Desired Cleaning Accessory
USING
Before use. make sure that
- The battery is fully charged, and fixed in place.
- The dust cup and filters are cleaned, dried, and fixed in place.
Power On/Off
Press the switch button, the appliance will start to work. Press the button again to shut down the appliance.
Select Cleaning Mode
There are two suction modes. and the press of a button cycles between low and high suction modes.
CLEANING
Main Body Cleaning
Turn off the power before cleaning the body. Please use a neutral detergent. wipe the body with half-wet cloth. Please avoid sun exposure and store in a cool and dry place.
Dust Cup Cleaning
Empty the Dust Cup
Press the dust cup release button to empty the dust. When using. if the garbage in the dust cup exceeds MAX Line. please empty it in time
Clean the Dust Cup and Filters
When the battery pack is removed, turn the dust cup counterclockwise to remove it. Then pinch the air inlet HEPA handle and pull out the metal filter upwards, then pinch the air inlet HEPA handle and rotate counterclockwise to unlock and pull out the air inlet HEPA upwards. Turn the outlet HEPA cover counterclockwise to unlock and remove it.
Note: Wash the filters with cold water at least once every month. Filter sponge can be rinsed with water to remove dust. Please ensure the filters are completely dry before reassembly
Brush Roller Cleaning
WARNING
Note: After long periods of use. the bristle may be jammed by hair or similar
build-up. It’s recommended to clean the brush roller periodically to ensure
efficient operation and maintain suction.
Remove the brush roller. gently clean the motored brush window and suction
mouth.
Remove the debris wrapped around the roller with Powerffy Hair Cleaning Tool. then flush with water.
Insert the brush roller into the motored brush window.push down the cover until it securely in place. (Please make sure the brush roller is completely dry before using.I
TROUBLESHOOTING
Scan and Get the PDF User Manual
WHERE TO GET MORE HELP
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>