Zitta VAGUE 48 Inch Shower Door Instruction Manual
- September 9, 2024
- Zitta
Table of Contents
- Zitta VAGUE 48 Inch Shower Door
- Product Usage Instructions
- INSTALLATION
- Parts list
- Base protection
- Built-in installation
- Wall extrusion installation
- Door Panel installation
- Wall jamb installation
- Backsplash installation for clear glass
- Top rail installation
- WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Zitta VAGUE 48 Inch Shower Door
Product Specifications:
- Brand: Zitta Group
- Model: Not specified
- Color Options: Chrome = 2, Black = 7
- Material: Various components including PVC and metal
Product Usage Instructions
Installation:
- Check all the components listed in the manual to ensure nothing is missing.
- Identify the gap between the door panel and the wall for proper installation.
- Adjust the fixed panel screw if there is a gap to ensure a secure fit.
- Follow the provided instructions for installing the PVC spacer and screws.
- Use the specified tools for installation to avoid damage to the product.
Maintenance:
- Clean the product regularly with a mild soap solution and a soft cloth.
- Avoid using abrasive materials that could scratch the surface.
- Check for any loose screws or fittings periodically and tighten them if necessary.
Safety Precautions:
- Do not exceed the recommended weight capacity of the product.
- Keep small parts away from children to prevent choking hazards.
- Use caution when handling glass components to avoid breakage.
Frequently Asked Questions (FAQ):
Q: What should I do if there is a gap between the door panel and the
wall?
A: Please adjust the fixed panel screw again to close the gap and ensure
a proper fit.
Q: How do I clean the product?
A: Use a mild soap solution and a soft cloth to clean the product. Avoid
abrasive materials that could damage the surface.
Q: Can I use any tools for installation?
A: It is recommended to use the specified tools provided with the product
to avoid damage during installation.
MODELS
VAGUE 48″
VAGUE 54″
VAGUE 60″
The micro protective layer formed during its application will make the water
bead along the glass for easy maintenance.
We recommend cleaning the door with the squeegee after each use.
THE MAINTENANCE OF YOUR SHOWER
Never use of powder or scouring pads.
Simply clean the door with a solution of water and vinegar, 1 to 5. You can
use a mild detergent but never use ammoniac,it could damage the glass surface.
INSTALLATION
IMPORTANT
- Thoroughly inspect your product before proceeding with the installation.
- The warranty will be void if the productis installed with a conspicuous defect.
CAUTION
- To prevent leaks, silicone must be applied on the outside of the shower and not on the inside!
- Read all instructions carefully before starting the installation.
- Save this manual for future reference.
Parts list
Chrome = 2
Noir / Black = 7
Numero / NO| Qte / Qty| Description / Description|
Code
---|---|---|---
| | Channel cap extrusion| PQ000102
2| | Chrome Wall Channel| PA000102
3| | Squeeze gasket| PJ004210
4| 5| Wall anchor| PV000199
5| 4| 1 5/8″ flat head screw| PV000299
6A| | VAGUE Clear Return pannel 8 mm 32″| DG0132RX01
6B| | VAGUE Clear Return pannel 8 mm 36″| DG0136RX01
6C| | VAGUE Clear Return pannel 8 mm 42″| DG0142RX01
7| 2| Machine screw M5 x 14| PV001299
8| 2| gasket| PJ004810
9| 2| Sleeve| PQ010799
10| | Chrome cap for glass M5 VAGUE| PQ011902
11| | Screw cover for hole| PQ011602
12| | Flat head screw 8 X 1 5/8″| PV000699
13| | 90 Chrome bracket for back splash| PQ010902
14| 5| Glass Wedge spacer| PT000199
Tools and materials required
Base protection
Built-in installation
Wall extrusion installation
Fixed panel installation
Top rail installation
Backsplash installation for clear glass
Door Panel installation
Magnet installation
Caulking
Wall jamb installation
Glass panel installation
Backsplash installation for clear glass
Top rail installation
Door panel installation
Door adjustment
Gaskets installation
WARRANTY
Warranty Bathtub / Shower
- Acrylic 20 years
- System and composants 3 years
- ADA and / or commercial products 1 year
- Shower doors 10 years
- Roller and hinges Lifetime
- Slik stone / solid surface 5 years
- Slik cast / cast iron 25 years
- ZittaClean 10 years
- Accessory, drain & niche 5 years
- Shower column 10 years
- Electronics 1 year
Following the terms and conditions described below, ZittaGroup warrants the product to be free from defects in workmanship from the date of purchase. This warranty applies to the initial date of purchase from an authorized dealer for the owner/end-user only. This warranty cannot be transferred to a third party. This warranty excludes any expenses related to shipping, handling and/or installation fees.
The present warranty does not cover the defects or breaking resulting from any Act of God, accident, catastrophe, abuse, negligence, improper installation, addition or removal of parts or equipment, of misuse, intensive variation of temperature, exposures to chemicals and/or abrasives of any kind, stains caused by different types of water such as ferrous or alkaline water.
ZittaGroup cannot be held responsible for the direct or indirect damage caused by or resulting from fortuitous occurrences, from the expenses of sundries, labor, wastes of time, material or any other cost related to the application or the replacement of the product or one of its components. In the eventuality that a manufacturing defect appears, the owner/enduser must have followed the instructions of installation described in the installation manual, have in his possession the proof of purchase as well as a proof of installation by a professional recognized by the construction industry. ZittaGroup will, at its own discretion, repair or replace the product based on the selling price at the time of purchase. ZittaGroup reserves the right to inspect, on site, the defect by a representative of its choice. Any return of goods will not be accepted without the written authorization from ZittaGroup.
Care and cleaning
Zitta recommends the use of mild dishwashing liquids or water to keep the
surfaces bright and clean. Rinse well and dry with a clean cloth.
CAUTION : Powder detergents and liquid abrasive cleaners may damage surfaces. Do not allow the visible surfaces to come in contact with corrosive products such as drain cleaners.
DO NOT USE: Cleaning agents that contains chlorides, alcohol, ammonia or mineral essences, steel wool, scouring pad or wire brushes.
CD Need help? Contact us!
Tel: 1-855- 492-4242 450-704-2323
lip Fax: 1-866-735-6885
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>