GENTENT V20240722 Frame Adapters Installation Guide

V20240722 Frame Adapters

“`html

Product Specifications:

• No tools needed for installation
• Quick and easy setup
• Designed for DuroMax generators
• Adjustable clamp for different panel configurations

Product Usage Instructions:

Installation Steps:

1. Place the notched rubber sleeve around the squared corner with
   the mouth facing out, just below the electric panel.

2. Firmly push the clamp mouth onto the frame leg below the
   sleeve, then bring it up and over the sleeve.

3. Tighten the clamp knob until it applies surface pressure, then
   turn it two more full turns for proper pressure.

4. For blocked panels, adjust the placement of the clamp assembly
   slightly higher where the electric panel is inset.

• Face the mouth of the rubber sleeve inwards to fit the blocked
  panel.

• Match the height with the clamp on the opposite corner to keep
  the canopy offset but level across the width.

Additional Resources:

Scan for more detailed instructions and installation videos, or
visit gentent.com/duromax.

Contact Information:

If you still have questions, contact our customer care team
at:
Email: support@gentent.com
Phone: 781-334-8368 Ext 1

FAQ:

Q: Do I need any tools for installing the frame adapters?

A: No, tools are not needed for installation. The process is
tool-free for your convenience.

Q: How do I adjust the clamp for different panel

configurations?

A: To adjust for blocked panels, place the clamp assembly
slightly higher where the electric panel is inset. Make sure to
match the height with the clamp on the opposite corner to maintain
a level canopy across the width.

Q: Where can I share my experience with the product and get a

free GenTent Tee?

A: You can share your experience and upload photos/videos by
following the instructions on gentent.com/duromax-offer
to claim your free T-shirt.

“`

No Tools Needed No additional installation time

IMPORTANT: READ THIS BEFORE INSTALLING FRAME ADAPTERS
GenTent ® Installation Addendum for Square Vertical Frame Posts
GenTent® has updated the design of its rubber sleeves to accommodate squared vertical frame posts. This addendum provides the necessary adjustments to install the GenTent on these posts.

Fig. A – New Rubber Sleeves with Notched Position
1. Place the notched rubber sleeve around the squared corner with the mouth facing out, just below the electric panel. (Fig. B)
2. Firmly push the clamp mouth onto the frame leg below the sleeve, then bring it up and over the sleeve. (Fig. C)

Fig. B – Rubber Sleeve around square tube with
mouth facing out

Fig. C – Clamp mouth slid up and over the
Rubber Sleeve

Fig. D – Rubber Sleeves placed higher, at inset panel

3. Tighten the clamp knob until it applies surface pressure, then turn it two more full turns for proper pressure.
4. For blocked panels (e.g., some DuroMax models), place the clamp assembly slightly higher where the electric panel is inset (Fig. D).
4a. Face the mouth of the rubber sleeve inwards to fit the blocked panel.
4b. Match the height with the clamp on the opposite corner to keep the canopy offset but level across the width. (Fig. E).

same height

The remaining frame rods and GenTent® Installation will continue along the steps of the standard GenTent® Installation Manual, although possibly slightly offset on one side.

Fig. E – Clamp height consistent along the width of the generator
SCAN FOR MORE DETAILED INSTRUCTIONS AND INSTALLATION VIDEOS, OR VISIT GENTENT.COM/DUROMAX STILL HAVE QUESTIONS? CONTACT OUR CUSTOMER CARE TEAM! | SUPPORT@GENTENT.COM | 781-334-8368 EXT 1
Copyright © 2024 GenTent® Safety Canopies, LLC ­ All Rights Reserved V20240722

HELP SPREAD THE WORD!

Let your DuroMax community know about your new custom hardware! We’re eager to spread the word to as many DuroMax customers as possible, and we need your help to make it happen. Share your GenTent pictures, post them to your online communities, or leave us a review.
Spread the good news, and we’ll send you a GenTent Tee! Don’t forget to send us the link to your post or review so we can thank you properly. Your support helps us continue to provide our quality products and services to the DuroMax community. Help us keep other families safe!

1 2

Write a Review or Post Your Experience
SHARE YOUR EXPERIENCE for your product and upload any photo(s) and/or video(s) you have. (Note: remember your “Review or Post Title”)
For GenTent.com: Follow the instructions received by email or find your product by searching for the model number above in the search box and click “Write a Review” under the “Review” tab.
For Online, Social, & In-Store Dealers (Lowes, Facebook, Power Equipment Direct, etc.): Please submit your review or post, and send us a link to the group, page or product page.
FILL OUT THE FORM at gentent.com/duromax-offer with the required information to claim your Free T-Shirt!

FOR FULL PROMOTION DETAILS AND TO CLAIM YOUR FREE T-SHIRT, VISIT GENTENT.COM /DUROMAX-OFFER/
Copyright © 2024 GenTent® Safety Canopies, LLC ­ All Rights Reserved V20240722

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>