SMRT V300 Personal Locator Beacon User Guide

: September 7, 2024
: SMRT

Table of Contents

SMRT V300 Personal Locator Beacon
Product Usage Instructions
Frequently Asked Questions
WHAT IS THE SMRT V300
APP FEATURES
FEATURE LIST
CONTENTS
PERFORM SELF TEST
HOW TO USE
- ACTIVATION METHODS
SPECIFICATION
WARRANTY
Documents / Resources

SMRT V300 Personal Locator Beacon

Specifications

Model: sMRT V300
Frequency: VHF DSC, 121.5 MHz
Class: M
GNSS: Yes
Compliance: RTCM Standard 11901.2, EU standard EN 303 132 V2.1.1

Product Usage Instructions

Product Features

Antenna
Lanyard Attachment Point
Strobe Light
TEST Button
Arming Door
LED Indicators
ON/OFF Button
GNSS Zone (including GPS & Galileo)
NFC Zone
Water Sensor

What’s in the Box

MRT V300
Life Jacket Bladder Attachment Clip
Lanyard
Oral Tube Mounting Clip

How to Test

Ensure the ARMING SWITCH is [OFF]
Hold the TEST BUTTON for more than 3 seconds

The LED indicators will show different states during testing, refer to the user manual for a full list of indications.

How to Use

Open the DOOR COVER
Slide the ARMING SWITCH to [ARMED]
Close the DOOR COVER

LED Pattern

Ensure the device is [ARMED]
Press the ON BUTTON for 1 second, or Immerse in water for 2 seconds

How to De-activate

Hold the ON BUTTON for 3 seconds, or Slide the ARMING SWITCH to [OFF]

The LED indicators will show different states during activation and deactivation.

Frequently Asked Questions

Q: Is the sMRT V300 compatible with all types of life jackets?

A: The smart V300 is designed to be compatible with most life jackets. However, it is recommended to verify compatibility with your specific life jacket model.

Q: How can I check the battery level of the sMRT V300?

A: You can monitor the battery level using the sMRT Beacon Management App or by referring to the LED indicators on the device.

Q: What should I do if the device displays a RED LED during testing?

A: If a RED LED is displayed during testing, please try the test again. If the issue persists, remove the device from service and contact an authorized service center.

WHAT IS THE SMRT V300

The sMRT V300 is a multi-system MSLD designed to RTCM Standard 11901.2 and EU standard EN 303 132 V2.1.1 for use during a man overboard (MOB) emergency. By integrating VHF DSC, AIS technologies, and 121.5 MHz, mariners in distress are equipped with life-saving tools that greatly enhance the likelihood of rapid location and recovery by vessels or Search and Rescue (SAR) authorities.

MOBILE APP COMPATIBILITY

Test, check, and maintain all sMRT devices in one mobile application.
The ‘smart Beacon Management App’ has been designed to give you peace of mind that your device is ready when you need it most and is compatible with all-new SMRT devices.

APP FEATURES

Check beacon status
View test history
Monitor battery level
Pair MMSI number
Please see the user manual for further details on how to use the sMRT mobile app.

FEATURE LIST

A Antenna
B Lanyard Attachment Point
C Strobe Light
D TEST Button
E Arming Door
F Left LED
G Right LED
H ON/OFF Button
I GNSS Zone (inc GPS & Galileo)
J NFC Zone
K Water Sensor

In your sMRT V300 box, you will receive the below accessories.
If you believe that anything is missing please contact your retailer as soon as possible.
sMRT V300
- P/N: MOA-50075
Life Jacket Bladder Attachment Clip
- P/N: 713020300
Lanyard
- P/N: 713020321
Oral Tube Mounting Clip
- P/N: 713020301

PERFORM SELF TEST

To perform a test of the sMRT V300, ensure the ARMING SWITCH is [OFF] and hold the TEST BUTTON for more than 3 seconds.
During operation, the LEFT LED indicates device test status and the RIGHT LED indicates GPS test status.

The LEDs may display the following indications:

Please refer to the user manual for the full list of LED indications.
IMPORTANT NOTE: During any test, if a RED LED is displayed, please try again. If the issue persists, remove it from service and return it to an authorized service center.
Ack = acknowledgement
Alt = alternating
Rx’d = received
Txing = transmitting

HOW TO USE

ACTIVATION METHODS

HOW TO ARM

Open the DOOR COVER
Slide the ARMING SWITCH to [ARMED]
Close the DOOR COVER

HOW TO ACTIVATE

Ensure the device is [ARMED]
Press the ON BUTTON for 1 second
OR- Immerse in water for 2 seconds

HOW TO DE-ACTIVATE

Hold the ON BUTTON for 3 seconds
OR- Slide the ARMING SWITCH to [OFF]

LED PATTERN

SPECIFICATION

TECHNICAL DETAILS

ACTIVATION
- Water activation (After 2 seconds of immersion)
- Manual activation
WATERPROOF
- Up to 10 meters (does not float)
SIZE
- 207mm (H) (including antenna) x 59mm (W) x 23mm (D)
WEIGHT
- 190g
TEMPERATURE RANGE
- Storage: -30° to +70°C (-22° to +158°F)
- Operating: -20°C to +55°C (-4°F to +131°F)
BATTERY
- 1-year service life
- 9V Lithium battery

BATTERY SHIPPING INFORMATION

UN3901 Lithium metal batteries contained in equipment in compliance with IATA PI: 970 Section II.

WARRANTY

WARRANTY REGISTRATION

This product has a warranty period of 1 year from the date of purchase.
Sign in or create a sMRT account to register your warranty for your product at warranty.smrtsos.com.
You will be required to list the serial number of the product(s) purchased.
Failure to complete registration could delay any warranty claim.
Please check the user manual for full warranty information.

IMPORTANT WARNINGS

The sMRT V300 is a local area Maritime Survivor Locating Device (MSLD), that transmits emergency messages via VHF DSC, 121.5 MHz, and the wearer’s GNSS position via AIS.
Before first use, perform a full system test to confirm that the device functions correctly as per manual.
After deployment into active service, a full system test of the sMRT V300 should be performed every month.
The sMRT V300 should ONLY be used in an emergency. DELIBERATE MISUSE MAY INCUR A PENALTY.
Annual inspection and recertification of the sMRT V300 by an authorized service partner is mandatory every 12 months. Please see the full list of service partners on smrtsos.com.
Do not dismantle the sMRT V300 as it contains no user-serviceable parts. Authorized service partners offer a full and comprehensive service and repair facility for the recertification of units and battery replacement.
Please see the full list of service partners on smrtsos.com.
Please check the user manual for full safety information.
Marine Rescue Technologies Ltd. and authorized service agents offer a full and comprehensive service and repair facility for the recertification of units and battery replacement.
Please visit smrtsos.com to find your nearest service agent.
Marine Rescue Technologies Ltd
Wescom Group, Unit J1, Anlaby Trade Park, Springfield Way, Anlaby, Hull, HU10 6RJ, UK
+44 (0) 1482 679 300 Iwww.smrtsos.com
VIEW FULL USER MANUAL
Scan the QR code to view the product user manual online