MARTUBE MAR-22E Share Cake Bluetooth Speaker User Manual
- September 6, 2024
- MARTUBE
Table of Contents
MARTUBE MAR-22E Share Cake Bluetooth Speaker
Product Introduction
Usage Instructions
-
Power On Long press the power button for 3 seconds to turn on the device. When two speakers are used together, both speakers need to be turned on at the same time.
-
The two speakers will automatically connect, and then use the mobile phone to connect to Bluetooth.
Note: The speakers are divided into Device 1 (LIGHT) and Device 2 (FLOWER), Device 1 has a small candlelight. Device -
Long press the power button for 3 seconds to turn on the device; short press the power button to switch to the night light function, and short press again to turn off the night light function. You can also use the blow hole to turn off the nole light by blowing on it; long press for 3 seconds to turn off the device.
-
Recording: Long press the record button for 3 seconds to start the recording and storage function. (After the prompt sound, single-click to play the last recorded content.) In recording mode, double-click the record button again (after the prompt sound) to re-record, single-click to end the recording, single-click the record button again to play the recording, and long-press the record button for 3 seconds to exit the recording function.
Note : The device connected to the phone is the master unit. When you long-press the master speaker, you can record with both units simultaneously; pressing the secondary unit will record only that unit. For example, when the phone is connected to Device 1, Device 1 is the master unit. Using the recording function will record on both speakers simultaneously- only; to exit the recording function, you need to long press both devices for 3 seconds. -
Volume Control: There are two volume buttons, one for increasing and one for decreasing the volume. Single-click to increase or decrease the volume by 5%, Long press the volume button to continue- only increase or decrease the volume.
Note: After connecting the speaker via Bluetooth, you can control the volume and switch songs on your phone. -
TWS (True Wireless Stereo) Connection: When the speakers are connected in TWS mode, double-click the power button to disconnect and use them separately. To reconnect in TWS mode, and turn off both devices and then turn them on again; they will automatically connect in TWS mode.
Charging Indicator
- When the device is charging, the red light will be steady.
- When fully charged, the green light will be steady.
- When the devices are not connected in
- TWS mode: the blue lights on both devices will flash quickly.
- When the TWS connection is successful but not connected to a phone via Bluetooth: the blue light on LIGHT will be steady, and the blue light on FLOWER will flash slowly.
- When the TWS connection is successful and connected to a phone via Bluetooth: the blue lights on both devices will be steady.
- When the TWS connection is successful and playing music via Bluetooth: the blue lights on both devices will flash slowly.
- Note: If the device buttons do not respond, you can long press the power button for more than 10 seconds to clear the Bluetooth data and re-pair the devices.MARTUBE MAR-22E Share Cake Bluetooth Speaker
Product Specifications
- Product Name: Share Cake Bluetooth Speaker
- Product Model: MAR-22E-Light
- Rated Input: 5V =- 1A
- Battery Type: Lithium-ion Battery
- Battery Capacity: 500mAh
- Product Weight: Net weight per unit 100g
- Rated Power: 3W
- Quality Certification: Qualified
- Product Dimensions:
- Device 1: 56.6 x 78.3 x 71mm
- Device 2: 77 x 78.3 x 71mm
- Product Material: Silicone + ABS
- Standards Compliance: GB 4943.1-2022
- Manufacturer: Shenzhen Mark WorkshopTechnology Co., Ltd.
- Manufacturing Address: Block Q, Shashi Industrial Park, Baoan, Shenzhen, Guang-Dong Province, China
- Contact Number: 0755-27203380
Cautions
- This product contains a built-in battery. Do not place near fire, or immerse in water or fire.
- Do not squeeze or collide with this product.
- Do not disassemble or modify the product.
- Supervise children to ensure that children under 14 do not use this product as a toy to avoid unnecessary accidents.
- If any abnormal situation occurs during use, stop using the product immediately.
- Use the power adapter and the Type-Cable provided with the product for charging.
- If the consumer uses a power adapter for the power supply, they should purchase a compatible power adapter that has obtained ned CCC certification and meets standard requirements.
Reminders
- To ensure the safe transportation of the product, it is recommended that you retain the packaging box for at least 30 days from the date of receipt.
- If you require after-sales service, please call the after-sales service number: 0755-27203380.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used by the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>