YUFANG W100 Series WIFI Multifunctional Intelligent Double Network Alarm System Instruction Manual

: September 6, 2024
: YUFANG

YUFANG W100 Series WIFI Multifunctional Intelligent Double Network Alarm

System

Specifications:

Model: W100 Series, W200 Series
Key Display: LED Light Indicator (W100), LCD Monitor (W200),LED Digital Color Monitor (W210)
Network: Wired Push via WIFI
Mobile App: Doodle Smart

Product Usage Instructions

Functional Interpretation:

Out of home deployment: Host enters alert state when user is out of home, and alarms when detectors are triggered.

At-home deployment: Host reacts to entrance/exit or peripheral detectors when the user is at home.

Dismissing: Host suspends ongoing alarms and will not alarm for ordinary defense zone triggers after dismissing the defense.

Host Networking:

Download Doodle Smart app on your smartphone based on the operating system.
Run the app and register/login (WeChat login available).
Enter 8* command on the keyboard to initiate EZ networking state. Once connected, WIFI icon will be constantly illuminated.
Enter 9* command to enter API network allocation state after successful networking.
Connect host to mobile app through WiFi for matching.

Append Accessories:

Add accessories through mobile app by clicking on the + icon in the accessories management interface.
For W200 series host addition, type 0* on the keyboard,trigger the remote control/detector, and repeat for adding more accessories.

Delete Accessories:
Delete accessories via mobile app by dragging the accessory left and clicking on the delete icon in the accessories management interface.

FAQ:

Q: How do I add accessories to the system?
A: You can add accessories through the mobile app by following the steps outlined in the user manual.

Q: How do I connect the host to the mobile app?
A: You can connect the host to the mobile app through WiFi for easy management and monitoring.

Instruction Manuals
.W100
Series
.W200
Series

Model Specification

Model| Key boa

rd

| Display| Wired Defense

Zone

| Push by Mobile App| WIFI| |
---|---|---|---|---|---|---|---
W100| —| LED Light

Indicator

| √| √| √| |
W200| √| LCD Monitor| √| √| √| |
W210| √| LED Digital

Color Monitor

| √| √| √| |

Performance Features

Providing color digital monitor and digital LCD monitor version, with clear display of host status.
Supporting the setting of cell phone APP and host keyboard, with an easy operation of APP, and without the complicated instruction of query. It can be accessed quickly for use.
With double network alarm Wi-Fi, it supports APP push, SMS, voice monitoring and other multi-channel alarm modes for reliable and stable alarm performance.
Supporting up to 50 remote controls and 100 wireless detectors in storage locations.
Supporting doorbell and greeting device functions, expanding the applications in stores, offices and other settings.
Name and number of gate, hall, bedroom, window, balcony, etc. can be set on all fittings.
The categories of body sensor, door magnet, smoke sensor, gas, water immersion, doorbell and greeting device can be set on all fittings.
Supporting Power outage alarm and other multiple extended alarms.
Four wired defense zones, supporting multiple wired detectors.
Storing and querying a number of daily operation records and alarm records.
Automatically calibrate time by WiFi network which ensures the clock is accurate all the time.
Dialing function, supporting 5 groups of redial numbers.
SMS sending function, support 5 groups of SMS numbers.
Supporting user deployment, dismissing and host alarm pushing to APP.
Fixed time deployment and dismissing function.

Functional Interpretation

Out of home deployment
Host enters alert state when user is out of home, and when detectors are triggered,host will alarm at once.
At-home deployment
Host reacts only to the entrance/exit or peripheral detectors when the user is at home.
Dismissing
Host suspends the ongoing alarm, and after dismissing the defense, the host will not alarm when the ordinary defense zone is triggered (except for emergency warning).
Time delay for deployment

After host deployment, the time delay is established to prevent false alarms caused by users leaving the site and passing through the armed area.

Time delay for alarm
The host will not alarm instantly after the user comes back and passes through the arming area to trigger the detector, which provides some time for the user to withdraw the defense of host, and the host will only alarm when the time is overdue and cannot be withdrawn.
Alarm
Once the host produces an alarm task, the site gives an audible and visual alarm,sending an SMS alarm to the preset cell phone, dialing the preset user phone and pushing the alarm content to the cell phone APP.

Host Networking

Application Download

Smartphone with Android System: Download “Doodle Smart” from the Applications.
Smartphone with IOS System: Download “Doodle Smart” from the AppStore.

Running applications

Running “Doodle Smart” from your smartphone.
Registration and login (You can login with WeChat).

Hosted Distribution Network

Entering “8*” command on the keyboard, the “WIFI icon” of the host will flash speedily and the host will enter the EZ networking state. Once the network is successfully connected, the host’s “WIFI icon” is constantly illuminated.

In EZ distribution network state, enter the “9*” command on the keyboard again.
The “WIFI icon” of the host flashes slowly, and the host enters the state of API network allocation. After successful networking, the host’s “WiFi icon” is always on.

The host is connected to the mobile APP through WiFi
Two methods are available to bind the alarm to the APP, one is the intelligent WIFI mode, the other is the AP mode.

intelligent WIFI mode (open cell phone Bluetooth can automatically identify the device networking)
Method of W100 series intelligent WIFI mode networking：After you login to the main interface, click on ” + ” in the upper right corner to “Add Device”. After entering the interface, click ” sensor “, find ” alarm WIFI ” in the security sensor, click the alarm (WIFI). Then long press the button behind the host for 5 seconds, the host indicates ” start network “, and the host ” WIFI ” indicator flashes speedily. The host enters the state of EZ network matching. Tapping “Confirm Indicator is flashing” on APP, entering the WIFI name and password and then tapping “Confirm”, APP will enter the countdown for matching, after successful matching, APP will automatically skip to the interface of device list.
Method of W200 series intelligent WIFI mode networking：After logging in to the main interface, click the top right corner + to “Add Device”. Then you can enter the “Sensing” interface, to find and click “Alarm WIFI”. After that, entering “8*” command on the keyboard, the “WIFI icon” of the host will flash rapidly, and the host will enter the EZ network state. After clicking “confirm indicator is flashing” on APP, you can type in the WIFI name and password and click “confirm”, APP will enter the matching countdown, and after successful matching, APP will automatically skip to the device list interface.
AP mode
Method of W100 series intelligent WIFI mode networking：Tapping the “+” in the upper right corner to “Add Device”, entering the “Sensing” interface, “then find and click ” Alarm WIFI “. After pressing the button behind the long press of the host for 5 seconds, the host will indicate “start network”, the “WIFI” indicator of the host will flash rapidly, then the host will enter the EZ network state. Once again pressing the button behind the long press of the host for 5 seconds, the host will indicate “start network allocation”. The “WIFI icon” of the host flashes slowly, and the host enters the API network allocation state. In the top right corner of the phone, click [Hotspot Network] and click Next to connect the phone to “SmartLife-XXXX” to complete the WIFI configuration.
Method of W200 series intelligent WIFI mode networking：Tapping the upper right corner + to “Add Device”. After entering the interface, you can click on “Sensor” and find “Alarm WIFI” in the security sensor, and click on the alarm (WIFI) and then input
“9*” command on the keyboard of the host.。 The host “WIFI icon” slow flashing, which enters the AP network state. In the upper right corner of the phone, click [Hotspot Network] and click Next to connect the phone to “SmartLife- XXXX” to complete the WIFI configuration.

Append accessories

Mobile APP addition: entering the mobile APP, clicking “accessories” to enter the interface of accessories management, and then clicking the “+” in the upper right corner. After that, it will trigger the remote control or other detectors. Once the host receives the signal from the accessory, a beep sound will be issued to complete the addition of the accessory.
W100 series Host addition：
Pressing the button on the back of the host, and then release. The host will sound a beep and then trigger the remote control or detector. Once the host receives the signal from the accessory, it sounds a beep to complete the addition of the accessory.
Repeatedly pressing the button behind the host, it can add other accessories again.
The host will automatically identify the remote control and detector. After adding, a mobile app can also be used to set the category, attributes and name of each detector.
W200 series host addition：
Typing “0 ” on the keyboard, the host beeps and then triggers the remote control or detector. Once the host receives the signal from the accessory, it will sound a beep to complete the addition of the accessory. Repeatedly input “0” on the keyboard, other accessories can be added again. The host can automatically identify the remote control and detector. After adding, mobile APP can also be used to set the category,property and name of each detector.

Delete accessories

Mobile APP deletion: entering the mobile APP, clicking “Accessories” to enter the interface of accessories management. After that, you can find the accessory you want to delete, drag the accessory left and click “Delete icon” to remove the accessory.
W200 series keyboard delete all accessories: all the accessories will be deleted by entering “3*” on the keyboard.

Host command table：

W200 series distribution network and sub-device management commands

Comm and| Forma t|

Command Description

---|---|---
0| 0| Inputting “0” on the keyboard, the host will enter learning mode.

And then, it will trigger the detector or press the remote control to increase the accessories.

3| 3| By inputting “3” on the keyboard, the host will delete all the accessories which contain remote control and detector.
8| 8| Host will enter the state of EZ distribution network.
---|---|---
9| 9| Host will enter the state of API distribution network.

W200 series function setting commands

Command

|

Setting Function

| Command Format and Range|

Default settings

---|---|---|---
00| Dialing the phone| 00（Phone number #| None
15| Keypad password switch| 15（0/1)#| 0(Close）
16| Settings for power

detection sending SMS

| 16（0/1)#| 0(Close）
17| Settings for power

detection alarm

| 17（0/1)#| 0(Close）
27| Automatic shutdown of

display screen

| 27（0/1)#| 1(Open）
28| Remote deployment and dismissal alarm sound

setting

| 28（0/1)#| 0(Close）
30| Changing the keyboard

password

| 30(New six-digit

password)#

| Default Password

123456

31| Time setting| 31Four-digit time)#| None
32| APP push switch| 32（0/1）#| 1（Open）
---|---|---|---
33| Missed call redial times| 33（1-9）#| 3 times
34| Setting of alarm sound| 34（0/1)#| 1(Open）
35| Countdown audible

indicator

function switch

| Empty
53| Setting alarm phone 3| 53（Phone number

| Empty
54| Setting alarm phone 4| 54（Phone number

| Empty
55| Setting alarm phone 5| 55（Phone number

| Empty
60| sending alarm SMS

function switch

| 60（0/1)#| 1(Open）
61| Setting SMS number 1| 61（Phone number

| Empty
---|---|---|---
62| Setting SMS number 2| 62（Phone number

| Empty
63| Setting SMS number 3| 63（Phone number

| Empty
64| Setting SMS number 4| 64（Phone number

| Empty
65| Setting SMS number 5| 65（Phone number

| Empty
70| Time delay setting for

deployment

| 70（0-199s）#| 0
71| Time delay setting for

alarm

| 71（0-199s）#| 0
99| Default setting recovery| 99（six-digit

password）#

| None

Alarm and remote supervision

Host is able to support several types of alarms. If an alarm occurs, an alarm SMS with detector name and number will be dispatched to the user’s cell phone, and the alarm information will be pushed to the cell phone APP, while the user’s phone will be called, and the user will be able to listen to the scene and remote control after being connected.

The following alarm categories are also available for the host

Main power malfunction: This alarm will be triggered when the main power supply fails.
Main power restoration: This alarm will be triggered when the main power supply is recovered.

Wired Defense Zone

W100 Series

Note：v+ provides a single power output, which can output 9V DC power to provide wired accessories when an external power supply is applied. Please refrain from supplying power to high power loads.

W200 Series

Security alarm by SMS

Host can send alarm SMS to the preset groups of numbers when an alarm happens ( the function switch of sending alarm SMS must be enabled ).

Host alarm automatically dial preset phone
In the event of an alarm, the alarm host will take the initiative to call the preset groups of phones (phone dialing function switch must be enabled), when the user answers,the host first plays the current type of alarm, and then the recording if there is a preset recording, and then voice message “Press 1 to deploy, press 2 to dismiss, press 3 to supervise, press 4 to communicate”. When the user finds a false alarm, he can directly press 2 to dismiss the system and end the process of alarm. Also, the user can press 3 to turn off the on-site alarm to supervise the site more explicitly. If supervision is not required, you can hang up the phone by direct.

If the user did not answer the phone or the dialing failed, it will repeat dialing the preset number based on the preset times until the user answers.

Remote calling of host by pre-set telephone
Once the host has preset groups of phone numbers to proactively call the alarm, it will automatically be connected, and will be able to supervise the site or control the host as soon as the phone is connected.

Technical Parameters

W100 Technical Parameters

Voltage input： DC9V
Operating current：<200mA，
Standby current：<80mA
Alarm output：<500mA
Wireless frequency：315/433/868/915Mhz
Wireless code：eV1527
WIFI modulation： IEEE802.11b/g/n WIFI
Standard spare battery ： 3.7V/500mAh lithium battery
Working temperature：-10~55℃
Relative humidity：<80%（without condensation）

W200 Technical Parameters

Voltage input：DC5V（Powered by micro USB standard interface）
Operating current：<200mA，
Standby current：<80mA
Alarm output：<500mA
Wireless frequency：315/433/868/915Mhz
Wireless code：eV1527
WIFI modulation：IEEE802.11b/g/n WIFI
Standard spare battery ： 3.7V/500mAh lithium battery
Working temperature：-10~55℃
Relative humidity：<80%（without condensation）

List of packages

W100 Series
One set of host computer with built-in spare battery.
A standard 9V/1A power supply. All other accessories are available upon customer request.

W200 Series
One set of host computer with built-in spare battery.
Standard micro USB 5V/1A power supply. All other accessories are available upon customer request.

FCC

Warnning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer
could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.