BOSCH BSS715CARP-03 Power Tools Instruction Manual

: September 6, 2024
: Bosch

Table of Contents

BOSCH BSS715CARP-03 Power Tools
Safety instructions
Product description and specifications
Charging process
- What the display elements mean
Troubleshooting
FAQ
Maintenance And Service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BOSCH BSS715CARP-03 Power Tools

Safety instructions

Read all the safety and general instructions. Failure to observe the safety and general instructions may result in electric shock, fire and/or serious injury.

Store these instructions in a safe place.
Only use the charger if you can fully evaluate all functions and carry them out without restrictions, or if you have received corresponding instructions.

This charger is not intended for use by children or persons with physical, sensory or mental limitations or a lack of experience or knowledge. This charger can be used by children aged 8 or older and by persons who have physical, sensory or mental limitations or a lack of experience or knowledge if a person responsible for their safety supervises them or has instructed them in the safe operation of the charger and they understand the associated dangers. Otherwise, there is a risk of operating errors and injuries.
Supervise children during use, cleaning and maintenance. This will ensure that children do not play with the charger.
Only charge Bosch Li-ion batteries or PBA 18V POWER FOR ALL system batteries with a capacity of 1.5 Ah or more. The battery voltage must match the battery charging voltage of the charger. Do not charge any non-rechargeable batteries. Otherwise there is a risk of fire and explosion.
Only use the charger in enclosed spaces and do not expose it to wet conditions. Water entering a charger increases the risk of electric shock.
Keep the charger clean. Dirt poses a risk of electric shock.
Always check the charge, including the cable and plug, before use. Stop using the charger if you discover any damage. Do not open the charger yourself, and have it repaired only by Bosch or by an authorised after-sales service centre using only original replacement parts. Damaged chargers, cables and plugs increase the risk of electric shock.
Do not operate the charger on an easily ignited surface (e.g. paper, textiles, etc.) or in a flammable environment. There is a risk of fire due to the charger heating up during operation.
Do not cover the ventilation slots of the charger. Otherwise, the charger may overheat and no long function properly.
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
In case of damage and improper use of the battery, vapours may also be emitted. Ensure the area is well-ventilated and seek medical attention should you experience any adverse effects. The vapours may irritate the respiratory system.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

Products sold in GB only:

Your product is fitted with an BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. The replacement plug should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere.

Product description and specifications

Intended use

The battery charger is intended for charging the rechargeable Bosch Li-ion batteries or PBA 18V POWER FOR ALL system batteries.

Product Features

Charging slot
Green battery charge indicator
Red temperature monitoring/error indicator
Wall mount

Technical Data

Charging process

Pay attention to the mains voltage. The voltage of the power source must match the voltage specified on the rating plate of the charger.
Ensure that the charging bay (1) and the battery contacts are free of coarse dirt. Ensure that the battery is fully inserted.
The charging process begins as soon as the mains plug for the charger is inserted into the mains socket and the battery is inserted into the charging bay (1).
The charging process is only possible when the temperature of the battery is within the permitted charging temperature range (0–45 °C).
Thanks to the intelligent charging process, the state of charge of the battery is automatically detected and then charged up with the optimal charge current depending on battery temperature and voltage.
A significantly reduced operating time after charging indicates that the battery has deteriorated and must be replaced.
When the charger is used continuously, or for several consecutive charge cycles without interruption, the charger may heat up. This is, however, harmless and does not indicate that the charger has a technical defect.

Charging times

The following table displays the approximate time required in minutes in order to fully charge the battery, depending on thebattery type. Charging times can vary. To find out more, visit: www.bosch-diy.com/wac

Rechargeable battery

PBA 18V-1,5 Ah W-A	≈ 30
PBA 18V-2,0 Ah W-B	≈ 34
PBA 18V-2,5 Ah W-B	≈ 43
PBA 18V-3,0 Ah W-B	≈ 51
PBA 18V-3,0 Ah W-C	≈ 45
PBA 18V-4,0 Ah W-C	≈ 59
PBA 18V-4,0 Ah Power Plus	≈ 65
PBA 18V-5,0 Ah W-C	≈ 71
PBA 18V-6,0 Ah W-C	≈ 87

****corresponds to a full state of charge

What the display elements mean

Green battery charge indicator flashing (quickly)

The rapid-charging procedure is indicated by the quick flashing of the green battery charge indicator (2).
The battery can be removed at any time and used.
Once approx. 80% of the battery capacity has been reached, the flashing of the green battery charge indicator will slow down. The rapid-charging process is now completed. If the battery remains in the charger, the charging process will be performed at a slower pace.

Continuous light green battery charge indicator

The continuous light of the green battery charge indicator (2) signals that the battery is fully charged. The battery can then be removed for immediate use.
When there is no battery connected, the continuous light of the battery charge indicator (2) signals that the mains plug is plugged into the plug socket and that the charger is ready to be used.

Continuous light red temperature monitoring indicator

The continuous light of the red indicator (3) signals that the temperature of the battery is outside of the permitted charging temperature range (0–45 °C). The charging process begins as soon as the permitted temperature range has been reached.

Flashing light red error indicator

The flashing light of the red indicator (3) signals that the charging process has been interrupted by a different fault (see “Battery is not being charged”).

Wall mounting

Pull the plug out of the socket before carrying out any work on the charger.
The charger can be used either free-standing (for use on a desktop) or mounted on the wall.
When affixing to the wall: Drill 2 holes, leaving a clearance of 56 mm. To secure it, use round-head screws with a diameter of 5 mm to max. 6.5 mm.

Troubleshooting

Battery is not being charged

Battery is not being charged, the red indicator (3) is flashing and the green battery charge indicator (2) is lit up continuously.
- Cause: The charger has identified an internal error.
- Corrective measure: Ensure that all batteries are fully inserted. Remove the mains plug and reinsert. If the error occurs again, have the charger checked by an authorised after-sales service centre for Bosch power tools.
- Cause: Battery is not correctly inserted.
- Corrective measure: Insert the battery into the charger correctly.
- Cause: The battery contacts and charging contacts are dirty.
- Corrective measure: Clean the battery contacts and charging contacts; e.g. by inserting and removing the battery several times.
- Cause: Battery defective
- Corrective measure: Replace the battery.
Battery is not being charged and the indicator (3) is lit up red.
- Cause: Battery temperature is outside of the charging range
- Corrective measure: Wait until the battery temperature is back within the permitted charging temperature range (0– 45 °C).

Indicators do not light up

None of the indicators are lighting up, battery will not be charged.

Cause: Plug socket, mains cable or battery charger defective
Corrective measure: Check the mains voltage. If necessary, have the charger checked by an authorised after-sales service centre.
Cause: Mains plug of the battery charger is not (correctly) plugged in
Corrective measure: Plug the mains plug (fully) into the plug socket.

FAQ

Q: What should I do if the charger overheats during operation?
- A: Do not cover the ventilation slots of the charger and avoid using it on easily ignited surfaces to prevent overheating.
Q: Can I charge non-Bosch batteries with this charger?
- A: It is recommended to only charge Bosch Li-ion batteries or PBA 18V POWER FOR ALL system batteries with this charger to avoid risks of fire and explosions.

Maintenance And Service

Maintenance and Cleaning

In order to avoid safety hazards, if the power supply cord needs to be replaced, this must be done by Bosch or by an after-sales service centre that is authorised to repair Bosch power tools.

After-Sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts.
You can find explosion drawings and information on spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any questions about our products and their accessories.

In all correspondence and spare parts orders, please always include the 10‑digit article number given on the nameplate of the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park North Orbital Road Denham Uxbridge UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com

People’s Republic of China

China Mainland
Bosch Power Tool (China) Co. Ltd.
Bosch Service Center
567, Bin Kang Road Bin Kang District Hangzhou, Zhejiang Province China 310052
Tel.: (0571) 8887 5566 / 5588
Fax: (0571) 8887 6688 x 5566# / 5588#
E-Mail: bsc.hz@cn.bosch.com
www.bosch-pt.com.cn

India Bosch Service Center

69, Habibullah Road, (Next to PSBB School), T. Nagar Chennai – 600077
Phone: (044) 64561816

Bosch Service Center

18, Community Center Phase 1, Mayapuri New Delhi – 110064
Phone: (011) 43166190

Bosch Service Center

Shop no 7&8, Aspen garden Walbhat road , Goregaon (E)
Near to Ram Mandir Railway Station Mumbai – 400063
Mobile: 09819952950

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd. Power Tools Locked Bag 66 Clayton South VIC 3169

Customer Contact Center

Inside Australia:
- Phone: (01300) 307044
- Fax: (01300) 307045
Inside New Zealand:
- Phone: (0800) 543353
- Fax: (0800) 428570
Outside AU and NZ:
- Phone: +61 3 95415555
- www.bosch-pt.com.au
- www.bosch-pt.co.nz

You can find further service addresses at: www.bosch- pt.com/serviceaddresses

Disposal

Chargers, accessories and packaging should be recycled in an environmentally friendly manner.
Do not dispose of chargers along with household waste.

Only for EU countries:

According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its implementation into national law, chargers that are no longer usable must be collected separately and disposed of in an environmentally friendly manner.
If disposed incorrectly, waste electrical and electronic equipment may have harmful effects on the environment and human health, due to the potential presence of hazardous substances.

Only for United Kingdom:

According to The Waste Electrical and Electronic Equipment Regulations 2013 (SI 2013/3113) (as amended), products that are no longer usable must be collected separately and disposed of in an environmentally friendly manner.

Robert Bosch Power Tools GmbH