Lowes HD983-R7Q Oil Filled Radiator Instruction Manual
- September 9, 2024
- lowes
Table of Contents
HD983-R7Q Oil Filled Radiator
“`html
Specifications
- Model No. : HD983-R7Q
- Item No. : U630181/U630182/U630183
- Power Input : 120V 60Hz
- Power Consumption : 1200W
Product Information
Product Characteristics:
Our electrothermal warmer operates using a tubular element as a
heat source and efficient heat conduction oil as the medium. Heat
is dissipated through radiation fins, and room temperature is
increased via air circulation. The warmer is convenient, safe,
aesthetically pleasing, operates quietly, and is free from
electromagnetic interference. It is suitable for various settings
such as research rooms, hospitals, hotels, training houses, and
bedrooms, providing comfort during cold seasons.
Product Structure Diagram
Operation Instructions
HD983-R7Q / HD984-R7Q Features:
-
Level Control: Adjust the heat level as
needed. -
Tip-over Switch: Automatically shuts off the
warmer if tipped over. -
Thermostat: Maintains the desired room
temperature. -
Lamp: Indicates the operational status of the
warmer.
Product Usage Instructions
-
Place the electrothermal warmer on a stable surface in the
desired room. -
Ensure proper ventilation around the unit for efficient air
circulation. -
Plug the warmer into a 120V power outlet with the provided
power cord. -
Adjust the level control to set the desired heat output.
-
Monitor the thermostat to maintain a comfortable room
temperature. -
In case of a tip-over, reset the unit before resuming
operation.
Contact Information
For Inquiries and Support:
If you have any questions or require assistance regarding
missing parts, assembly, or operation, please contact us via Amazon
Message or call our customer service at 213-4467172 or
661-4358826.
Warranty Information
Important:
Please retain your proof of purchase for warranty service. For
warranty inquiries or service, contact our customer service
department at the provided phone numbers during operating hours
(8:30am – 5:30pm P.S.T.).
Address
ROWAN ELECTRIC APPLIANCE LLC
28407 Ascent Way, Santa Clarita, CA 91350
Phone: 213-4467172 or 661-4358826
FAQ
Q: How do I reset the tip-over switch on the
warmer?
A: To reset the tip-over switch, ensure the
warmer is on a stable surface, then turn it off and back on again
to reset the safety feature.
“`
Model No.: HD983-R7Q Item No.: U630181/U630182/U630183
Model No.: HD984-R7Q Item No.: U630192/U630193
Model# HD983-R7Q 120V 60Hz 1200W
Model# HD984-R7Q 120V 60Hz 1200W
IMPORTANT INSTRUCTIONS
When using heater, basic precautions should always be followed to reduce the
risk of fire, electric shock, injury to persons, and hyperthermia, including
the following: 1) Read all instructions before using this heater. 2) This
heater is hot when in use. To avoid burns, do not let bare skin touch hot
surfaces. If provided, use handles when moving this heater. Keep combustible
materials, such as furniture, pillows, bedding, papers, clothes, and curtains
at least 3 feet (0.9 m) from the front of the heater and keep them away from
the sides and rear. 3) Extreme caution is necessary when any heater is used by
or near children or invalids and whenever the heater is left operating and
unattended. 4) Always unplug heater when not in use. 5) Do not operate any
heater with a damaged cord or plug or after the heater malfunctions, has been
dropped or damaged in any manner. Discard heater, or return to authorized
service facility for examination and/or repair. 6) Do not use outdoors. 7)
This heater is not intended for use in bathrooms, laundry areas and similar
indoor locations. Never locate heater where it may fall into a bathtub or
other water container. 8) Do not run cord under carpeting. Do not cover cord
with throw rugs, runners, or similar coverings. Do not route cord under
furniture or appliances. Arrange cord away from traffic area and where it will
not be tripped over. 9) To disconnect heater, turn controls to off, then
remove plug from outlet. 10) Do not insert or allow foreign objects to enter
any ventilation or exhaust opening as this may cause an electric shock or
fire, or damage the heater. 11) To prevent a possible fire, do not block air
intakes or exhaust in any manner. Do not use on soft surfaces, like a bed,
where openings may become blocked. 12) A heater has hot and arcing or sparking
parts inside. Do not use it in areas where gasoline, paint, or flammable
liquids are used or stored. 13) Use this heater only as described in this
manual. Any other use not recommended by the manufacturer may cause fire,
electric shock, or injury to persons. 14) Always plug heaters directly into a
wall outlet/receptacle. Never use with an extension cord or relocatable power
tap (outlet/power strip). 15) SAVE THESE INSTRUCTIONS 16) Hyperthermia can
result in death. Symptoms of hyperthermia include high body temperature,
headache, nausea, vomiting, tiredness, dizziness, fainting, and rapid pulse.
If you begin to experience symptoms related to hyperthermia, turn off the
heater and seek medical attention. 17) To avoid excessive room temperatures
which can cause hyperthermia: DO NOT leave product running unattended in a
confined space around infants, or individuals with reduced physical, sensory,
or mental capabilities.
PLEASE READ AND SAVE THESE INSTRUCTIONS
Thank you for choosing our heater please read this instruction carefully
before operating and keep it for future reference.
I. Product characteristics
Our electrothermal warmer operates as follows: tubular element is taken as a
heat source, efficient and permanent heat conduction oil is taken as the
medium, heat eliminates via radiation fin, room temperature is increased via
air circulation.
Our electrothermal warmer has the following advantages: convenient, safe,
beautiful, tranquil operation, without electromagnetic disturbance etc. It is
suitable for such locations as scientific research rooms, hospitals, hotels,
training practice houses, and bedrooms, etc. The warmer keeps your room or
office more comfortable in cold seasons!
II. Product structure diagram
C’-onta.Jner
–
I I I I I I I IIll 0o – Control box
I I I I I I I Il
–
TruckJe
Ill. Operation instruction
Mounting: Take out the heater and all the parts from the packing carton; 1.
The heater should be unplugged during assembly or disassembly 2. For the
convenience of assembly, turn the unit upside down. 3. Place the footplate on
the top of both radiation fins; You’d better refer to the product structure
diagram, and check the wheels location between the first and last set of fins;
4. Fix the footplate on the heater with specified U type bolt and wing
nut,tighten the screw; 5. After assembly is complete, turn the unit wheel side
down for operation Note: Do not operate without wheels attached.
Level
Tip-over Switch Thermostat
automatic
1
2
lamp
HD983-R7Q HD984-R7Q
Thank you for purchasing this product! If you have any questions about the
product, such as missing parts, damaged products, product assembling, and
operation, please contact us via Amazon Message or customer service number:
213-4467172 or 661-4358826.
IMPORTANT Please call our customer service department for any consulting:
213-4467172 661-4358826 (8:30am – 5:30pm P.S.T.) DATED PROOF OF PURCHASE IS
REQUIRED FOR WARRANTY
SERVICE.
AVIS Veuillez appeler le service a la clientele pour toutes questions au:
213-4467172 661-4358826 (8:30am – 5:30pm P.S.T.) PREUVE D’ACHAT ORIGINALE
REQUISE POUR SERVICE DE GARANTIE.
IMPORTANTE S61o hay que llamar nuestro departamento de servicio
al cliente en caso de tener preguntas o inquietudes: 213-4467172 661-4358826
(8:30am – 5:30pm P.S.T.) SE REQUIERE PRUEBA DE COMPRA CON FECHA PARA
SERVICIO BAJO GARANT[A.
Address: ROWAN ELECTRIC APPLIANCE LLC 28407 Ascent Way, Santa Clarita, CA
91350 Phone: 213-4467172 or 661-4358826
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>