HEAD RUSH HC03 FRFR-GO Bluetooth Speaker Owner’s Manual
- September 12, 2024
- HEAD RUSH
Table of Contents
QUICKSTART GUIDE
GETTING STARTED
Package Contents : FRFR-GO, Power Cable, Quickstart Guide, Safety & Warranty Manual
- REGISTER YOUR PRODUCT
- DOWNLOAD THE USER GUIDE
https://inmusic.to/HeadRushFRFR-112MK2
SETUP
Notes:
Consult the full User Guide for additional safety precautions.
For best results, do not connect a guitar directly to FRFR-GO’s input as the
circuitry is designed to only be connected to an amp modeler’s line output.
To avoid unwanted distortion, set the output of your amp modeler’s line-level
output as close to unity gain (0 dB) without going over. For HeadRush
modelers, set their main volume knob around “7”, depending on your rig’s
setup. If you are unsure of where the unity gain position of your amp modeler
is, check your amp modeler’s User Guide.
A.Power Input: Use the included power cable to connect this input to a
power outlet.
B. Power Switch : Use this switch to power the speaker on or off.
FEATURES
C. Charge LED: This LED will be lit green when fully charged and lit red
when charging.
D. Input: Use a 1/4” (6.35 mm) cable (not included) to connect your amp
modeler to this line-level input.
E. Input Volume: Turn this knob to adjust the gain of the input.
F. Bass: Turn this knob to adjust the low-end frequency sound.
G.Treble: Turn this knob to adjust the high-end frequency sound.
H. Main Volume: Turn this knob to adjust the overall volume of the
speaker and the PHONES output.
I. Aux: Connect an optional stereo audio source (e.g., smartphone,
tablet, etc.) to this input using an 1/8” (3.5 mm) stereo cable (not
included).
J. Phones: Connect standard 1/8” (3.5 mm) stereo headphones to this
output.
Note: This will mute the internal speaker.
BLUETOOTH
- Press and hold the BLUETOOTH button for 3 seconds, then release it. FRFR-GO will enter pairing mode and the BLUETOOTH LED will flash.
- Select “FRFR-GO” from your Bluetooth device’s setup screen.
- When paired successfully, the Pair LED will be lit solid.
To control the input level, make sure your Bluetooth device volume is turned up and then adjust the MAIN VOLUME knob.
To unpair, press and hold the BLUETOOTH button for 3 seconds.
DOWNLOAD THE FULL USER GUIDE TO LEARN MORE
HEADRUSHFX.COM
HEADRUSHFX.COM/SUPPORT
For articles, videos, and web support.
Model: HC03
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>