ERAZER XM102 Wireless Speaker User Manual
- September 5, 2024
- ERAZER
Table of Contents
ERAZER XM102 Wireless Speaker
Specification of Product
Model of Product: ERAZER XM102
Version: VS.4
Effective Distance: Approx. l0m
Speaker Diameter: <1>40mm
Impedance: 40
Frequency Respinse: 220Hz-15KHz
Waterproof level: I PX6
Input: 5V ⎓ 1A
Battery Capacity: l000mAh
Duration: Approx. 8 H
Charging Time: Approx. 2 H
Item List
-
Speaker *1
-
Instruction *1
-
Charging cable *1
Overview
Connection
Operating Instruction of Product
Power On {NO. ① )
Long press the multi-function button for 3 seconds, turn on the device.
Shut Down {NO. ① )
Long press the multi-function button for 5 seconds, turn it off.
Note: After powering on, if it is not paired with a Bluetooth device for
3 minutes, it will automatically shut down; If it is not connected to a
Bluetooth device after 3 minutes, it will automatically power off after 3
minutes.
Bluetooth Device Connection (NO. ⑥ }
a. For the first time, through the Bluetooth device setting option, search for
the Bluetooth pairing name of the speaker “FRA7E’R XM107”, and tap to connect
successfully.
b. For reusing, and automatically connect the Bluetooth device.
Note: The Android system shall be turned on: the volume of Bluetooth
device is synchronized with the device
Function Operation (NO. ①,②,③,④,⑤ )
Pause/Play: Click the multifunction button once (NO.①)
Volume increase: Click n+” once {NO.②)
Volume reduction: Click”-” once (NO.③)
Previous song: Press and hold the”-” for 2 seconds {NO.③)
Next song: Press and hold the “+” for 2 seconds (NO.②)
Call answering/ending: Click the multifunction key once (NO.①)
Call rejection: Press and hold the multifunction key for 2 seconds(NO.①)
FM/Bluetooth: Click the “M” button once to switch FM radio, and then
click the M button again to switch Bluetooth (NO.④)
Turn on/off lights: When the Bluetooth speaker is turned on, long press
and hold the light button for 1.5 seconds to turn off the lights, and then
long press and hold again for 1.5 seconds to turn on the lights (NO.⑤)
Light Switching: Click the light button to switch the light mode, with a
total of 7 lighting effects (NO.⑤)
Team up (NO. ④ )
Long press the 11M” button for 5 seconds to group speakers (two identical
speakers are required)
Reset pairing(NO. ④ )
Long press the “M” key for 8 seconds to clear pairing information and turn off
the speaker
Charging instructions
Speaker charging: The charging icon (lightning bolt) on the battery level digital display screen is constantly on, and the battery level increases step by step with the charging status. It stays on after being fully charged.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful! interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>