Novtie HMI080 Industrial Tablet PC User Manual
- September 6, 2024
- Novtie
Table of Contents
HMI080 Industrial Tablet PC
“`html
Specifications:
- Name: Industrial Tablet PC
- Model: HMI080
- Size: 8 inch
- CPU: RK3288W 1.8GHz Quadcore Cortex-A17
- GPU: Mali-T764 GPU
- Internal Memory: 2GB DDR3
- Storage: 16GB eMMCMLC
- Communication: RJ45, WIFI, RS485, RS232
- OS: Android 7.1.2
- Case Material: PC+ABS
- Operating Temperature: -10 to 60°C
- Operating Voltage: DC12V/2A
- Wireless: WIFI
- Wired Network: Gigabit RJ45
- Mobile Network: 4G (optional)
- Serial Communication: 1xRS485, 2xRS232
- USB Interface: 1xUSB Host, 1xUSB OTG
- Mounting: Snap-in, VESA hole 75x75mm
Product Usage Instructions:
Network Setup:
WIFI Setup:
1. Enter the system settings interface.
2. Select the WLAN option and turn on WIFI.
3. Wait for the device to search for WIFI hotspots and select
the desired hotspot.
4. Enter the correct password to connect.
WIFI Hotspot Setting:
– Select Network Sharing and Portable Hotspot in the Wireless
and Networking screen of the System Settings for more settings.
– Set the hotspot name and password in the WLAN Hotspot
option.
Ethernet Settings:
– Open the settings and go to Setup -> More -> Ethernet to
configure Ethernet.
– Default Ethernet settings are to get IP automatically; for
static IP, configure Ethernet Eth0.
Application Installation:
1. Copy the APK to a USB flash drive.
2. Insert the USB flash drive into the USB HOST port of the
industrial tablet.
3. Open the built-in Apk installer of the industrial tablet.
4. Find the desired APK and click to install it.
System Extension Settings:
Screen Rotation Setting:
– Set screen rotation in System Settings/Display/Screen
Rotation.
– To lock the screen rotation, check the Do not allow app to
rotate the screen option.
FAQ:
Q: How do I set up timed power on/off and reboot functions on
the HMI080 industrial tablet?
A: The HMI080 industrial tablet comes with
timed power on, timed power off, and timed reboot functions that
can be set according to your needs. It is recommended to set up
timer restart settings to enhance system stability. You can
configure these settings in the system settings menu.
“`
Industrial Tablet User Manual
HMI080 Specifications
Name: Industrial Tablet PC Model: HMI080 Size: 8 inch CPU:RK3288W 1.8GHz Quadcore Cortex-A17 GPU : Mali-T764 GPU Internal Memory: 2GByte DDR3 Storage: 16G eMMCMLC Communication: RJ45 WIFI RS485 RS232 OS: Android7.1.2 Case Material: PC+ABS Operating Temperature: -1060 Operating Voltage: DC12V/2A
Resolution: 1280*800 Contrast Ratio: 800 Backlight Brightness: 300 Backlight Type: LED Backlight Life: 20000 hours Screen Ratio: 16:10 Viewing Angle: 160° Touch Screen: Capacitive Touch Sound: Built-in speakers (external),
headphone jack output Wireless: WIFI
Wired Network: Gigabit RJ45
Mobile network: 4G optional
Serial communication: 1xRS485 2xRS232
USB Interface: 1xUSB Host, 1xUSB OTG
Mounting: Snap-in, VESA hole 75x75mm
Interface definition
No.
definition
1
Power
2
+12
3
GND
4
RS485-B
5
RS485-A
6
GND
7
RS232-RXD3
8
RS232-TXD3
9
GND
10
RS232-RXD1
11
RS232-TXD1
HMI080 Hardware options
No. Functions Default
1
Storage
16GB
2
WIFI
2.4G
3
4G
N/A
4
CAN
N/A
5
RS485
x1
6
RS232
x2
7
antenna(WIFI,4G) inside
8
speaker
inside
9
PoE
N/A
Option
32GB 2.4G+5.8G optional N/A
remark
Support 4G+GPS
outside outside optional
Automatic directional control
Support 10W max
Network Setup
WIFI setup
Enter the system settings interface, select the WLAN option, turn on WIFI, and
then wait for the device to search for WIFI hotspots, select the hotspot you
want to connect to,
and enter the correct password to connect. The operation flow chart is as
below:
WIFI Hotspot setting
Select “Network Sharing and Portable Hotspot” in the “Wireless and Networking”
screen of the System Settings screen for more settings.
Set the hotspot name and password in the “WLAN Hotspot” option.
Ethernet Settings
Please open the setting, go to Setup->More->Ethernet to configure Ethernet,
the default Ethernet is to get IP automatically, if you need to set static IP,
you can click Ethernet Eth0 to configure it. The specific flow chart is as
follows:
Application Installation
Copy the APK to a USB flash drive, insert it into the USB HOST port of the
industrial tablet, and open the built-in Apk installer of the industrial
tablet.
Find the APK you want to install and click to install it. The management of
the Apk installer allows you to uninstall installed APKs.
System Extension Settings
1Screen Rotation Setting Set screen rotation in System Settings/Display/Screen
Rotation. If
you want to lock the screen to prevent the system from responding to the app’s
rotation request, you can check the “Do not allow app to rotate the screen”
option.
2Hide toolbars, message boards
3Setting the backlight to turn off automatically Set the hibernation time in
System Settings/Display/Hibernation, the
system will turn off the display automatically after the timeout, and turn on
the display automatically after tapping the touch screen again.
4Setting up timed power on/off and timed reboot HMI080 industrial tablet comes
with timed power on, timed power
off, timed reboot function, which can be set according to the actual needs. It
is recommended to do the timer restart setting, timer restart can enhance the
stability of the system.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. NOTE: This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: — Reorient or relocate the receiving antenna. — Increase
the separation between the equipment and receiver. — Connect the equipment
into an outlet on a circuit different
from that to which the receiver is connected. — Consult the dealer or an
experienced radio/TV technician for help. The device has been evaluated to
meet general RF exposure requirement. The device can be used in portable
exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>