behringer XTM-D MIC ADAPTER Digital Wireless Adapter Set User Guide
- September 6, 2024
- Behringer
Table of Contents
- behringer XTM-D MIC ADAPTER Digital Wireless Adapter Set
- FAQs
- Safety Instruction
- XTM-D MIC ADAPTER
- Accessories Supplied
- CONTROLS
- TRANSMITTER HOOKUP
- RECEIVER HOOKUP
- Operation
- Status LED Indicator
- Specifications
- WARRANTY
- FCC
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
behringer XTM-D MIC ADAPTER Digital Wireless Adapter Set
FAQs
Q: How do I pair the transmitter and receiver?
A: To pair the transmitter and receiver, press the PAIR/MUTE button on both devices simultaneously until they indicate they are paired.
Q: What is the working distance of the wireless system?
A: The working distance of the wireless system is up to 30 meters.
Safety Instruction
- Please read and follow all instructions.
- Keep the apparatus away from water, except for outdoor products.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Use only attachments/accessories specified by the manufacturer.
- Use only specified carts, stands, tripods, brackets, or tables. Use caution to prevent tip-overs when moving the cart/apparatus combination.
- Avoid installing in confined spaces like bookcases.
- Do not place near naked flame sources, such as lighted candles.
- Operating temperature range 5° to 45°C (41° to 113°F).
WARNING
- Replacement of a battery with an incorrect type can defeat a safeguard. Disposal of a battery into a fire or a hot oven, or mechanically crushing or cutting of a battery can result in an explosion. Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Attention should be drawn to the environmental aspects of battery disposal. Batteries (battery packs or batteries installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.
XTM-D MIC ADAPTER
- Unleash wireless superior sound and mobility with the XTM-D upgrade
- Empower your performance with our versatile tool suitable for broadcasters, presenters, lecturers, vocalists, instrumentalists, actors, and artists
- Experience wireless freedom at its best with XTM-D’s 30 m (100 ft) range
- Perform with confidence knowing XTM-D’s impressive 9-hour runtime won’t let you down
- Enjoy the highest signal integrity with XTM-D’s gold-plated 3-pin XLR output connector
- Perform without restrictions with XTM-D’s license-free digital wireless connectivity
- Keep your XTM-D safe and secure with our high-quality zipper case and USB charging cable included
Accessories Supplied
- USB charging (Y) cable x 1
- Protective case
CONTROLS
- USB Type C charging port
- Status LED
- Transmitter POWER and PAIR/MUTE Button
- Receiver POWER and PAIR/MUTE Button
- Transmitter XLR 3 Pin Female Connector (A3F)
- Receiver XLR 3 Pin Male Connector (A3M)
TRANSMITTER HOOKUP
RECEIVER HOOKUP
Operation
A charger is not included. The power delivered by the charger must be between 4V/465mA (1.86W) minimum required by this equipment, and 6.5V/550mA (3.58W) maximum, in order to achieve the maximum charging speed. This equipment supports the USB Power Delivery charging protocol.
- Please charge the transmitter and receiver before use.
- Connect the transmitter directly to the XLR output connector of your dynamic microphone.
- Connect the receiver directly to the microphone XLR input of your mixer or powered speaker.
- Power ON/OFF
- Press and hold the power button for 3 seconds to turn ON/OFF the transmitter.
- Press and hold the power button for 3 seconds to turn ON/OFF the receiver.
- Mute / Unmute
- Short-press the power button once to mute or unmute the transmitter or the receiver.
- Pairing
- The transmitter and receiver come pre-programmed for auto-pairing immediately after power on. In case the automatic pairing is not working, please follow the method below
- Press and hold the power button on the transmitter and receiver for 5 seconds, then enter pairing mode. Once pairing is successful, perform a short press of the power button to exit pairing mode.
Status LED Indicator
Status | LED |
---|---|
Not Paired to Receiver* | Amber flashing every 3 seconds |
Pairing Mode | Red/Amber flashing alternately |
Paired to Receiver* | Amber |
Mute ON | Amber flashing every 1 second |
Low Battery | Red Flashing |
Charging | Red |
Fully Charged | Off |
*Note : The wireless receiver and transmitter communicate directly with each other, and do not require Bluetooth.
Specifications
****Behringer is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
WARRANTY
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss that may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances, and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones, and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2024 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at community.musictribe.com/support
Behringer XTM-D MIC ADAPTER
- Responsible Party Name: Music Tribe Commercial NV Inc.
- Address: 122 E. 42nd St.1, 8th Floor NY, NY 10168,
- United States
- Email Address: legal@musictribe.com
- XTM-D MIC ADAPTER-T FCC ID: QWHXTM-DMIC-T
- XTM-D MIC ADAPTER-R FCC ID: QWHXTM-DMIC-R
XTM-D MIC ADAPTER
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC
RF Radiation Exposure Statement:
The FCC SAR limit is 1.6 W/kg, with a maximum SAR value of 0.38 W/kg when
testing the device for use on the body. The device was tested at 0 mm and
meets RF exposure requirements. CAN ICES-003 (B)/NMB-003(B) IC RF Radiation
Exposure Statement:
Caution! This device contains license-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science, and Economic Development Canada’s
license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device. The IC SAR limit is 1.6 W/kg, with a maximum SAR value of 0.38 W/kg when testing the device for use on the body. The device was tested at 0 mm and meets RF exposure requirements.
Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office or your household waste collection service.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>