Chilye NACS EV Charging Connector User Manual
- September 5, 2024
- Chilye
Table of Contents
Chilye NACS EV Charging Connector
Specifications:
- Model Number: CL-C1NACSCD350TH
- Product Name: NACS EV Charging Connector
- Frequency: 315MHz
Product Usage Instructions
Opening the Charging Port:
- Park the vehicle in the charging station.
- Ensure the vehicle is positioned so that the charging cable can easily reach the charging port on the vehicle.
- Press and release the button on the charging cable to activate the radio remote and open the charging port door.
- The button location on the charging cable is shown in Figure 1.
Important Notes:
Pressing the button on the charging cable can open the charging port door,
even if the vehicle is locked or out of range of the identification key.
Refer to Figure 2 for the opening state of the charging port door.
FAQ:
Q: What should I do if the charging port door does not open?
A: If you encounter issues with opening the charging port door, ensure that
the vehicle is properly parked and try pressing the button on the charging
cable again. If problems persist, consult the dealer or a professional
technician for assistance.
Open the charging port
Once the vehicle enters the Park of the charging station. Park the vehicle to ensure that the charging cable easily reaches the charging port. The charging port is located on the vehicle. press and release the button on the charging cable to enable the radio remote to open the charging port door. (The button position is shown in Figure 1 below)
Please note that if the charging cable is near the charging port door, pressing the button on the charging cable can open the charging port door even if the vehicle is locked or out of range of the identification key. （The opening state of the charging port door is shown in Figure 2 below）
FCC
Warning: Changes or modifications to this device without the express approval of the compliance party may deprive the user’s permission to operate the device. FCC Terms Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC and Industry Canada radiation exposure limits set forth for an uncontrolled environment. The device must not be co-located or operating in conjunction with any other antenna or transmitter. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
This equipment complies with FCC and Industry Canada radiation exposure limits
set forth for an uncontrolled environment.
The Model number, PMN, and HVIN are as below
| CL-C1NACSCD350TH | NACS EV Charging Connector | C1NC3 | 315MHz |
|---|
NO 2 Rui en Lane,Xingpu Road,Suzhou Industrial Park, Jiangsu
Tel: +86-512-69566051
Fax: +86-512-69566055
http://www.chilye.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>