ShenZhen TBD Optoelectronic Technology s3296 Flexible LED Display Instruction Manual
- September 6, 2024
- ShenZhen TBD Optoelectronic Technology
Table of Contents
s3296 Flexible LED Display
“`html
Product Information
Specifications:
- Compliance: Part 15 of FCC Rules
- Exposure Limits: FCC approved for uncontrolled environment
- Minimum Distance: 20 cm between radiator and body
- Operation Conditions: No harmful interference, device must
accept received interference
Product Usage Instructions
Installation:
1. Ensure the device is placed with a minimum distance of 20 cm
between the radiator and your body.
2. Do not co-locate this transmitter with any other antenna or
transmitter.
Operation:
1. Power on the device following the manufacturer’s
instructions.
2. Use the device within the specified environmental conditions
mentioned in the manual.
Maintenance:
1. Keep the device clean and free from dust or debris.
2. In case of any issues, refer to the user manual for
troubleshooting steps.
FAQ
Q: What should I do if I experience interference while using
the device?
A: If you experience interference, try adjusting the position of
the device or moving it to a different location to minimize
interference.
Q: Can I use this device in close proximity to other electronic
equipment?
A: It is recommended to maintain a minimum distance of 20 cm
between this device and other electronic equipment to avoid
interference.
“`
FCC Information
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: –Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver. –Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. –Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum
distance of 20 cm between the radiator and your body. This transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>