HAGERMAN REPLICATE Ground Loop Eliminator Pedal Instruction Manual
- June 13, 2024
- HAGERMAN
Table of Contents
REPLICATE
Ground Loop Eliminator Pedal
Made in USA
Copyrights & Trademarks
- Copyright Hagerman Amplification 2023. All rights reserved. No part of this document may be photocopied, reproduced, or translated to another language without prior written consent.
Disclaimer
The information contained in this document is subject to change without
notice.
Hagerman Amplification shall not be liable for errors contained herein or for
consequential damages in connection with the furnishing, performance, or use
of this material.
Warranty
Hagerman Amplification warrants this product free of defects in materials and
workmanship for a period of 5 years (90 days tubes and footswitch). If you
discover a defect, Hagerman Amplification will, at its option, repair or
replace the product at no charge to you provided you return it during the
warranty period, transportation charges prepaid to Hagerman Amplification.
This warranty does not apply if the product has been damaged by negligence,
accident, abuse or misuse or misapplication, has been damaged because it has
been improperly connected to other equipment or has been modified without the
express written permission of Hagerman Amplification. This warranty is limited
to the replacement or repair of this product and not to damage to equipment
of other manufacturers. Any applicable implied warranties, including warranty
of merchantability, are limited in duration to a period of the express
warranty as provided herein beginning with the original date of purchase and
no warranties, whether express or implied shall apply to the product
thereafter. Under no circumstances shall Hagerman Amplification be liable for
any loss, direct, indirect, incidental, special, or consequential damage
arising out of or in connection with the use of this product.
Hagerman Amplification
1521 Alexander St
Honolulu, HI 96822
808-383-2704
www.hagamps.com
Description
The REPLICATE pedal is designed to drive two or three amplifiers at the same
time from a single guitar or pedal chain.
The main output is a direct connection to input, thereby providing the load
seen by guitar. Copied outputs are each independently isolated from ground in
order to prevent ground loops, which typically end up injecting hum or buzz
into the signal path. Internal opto-isolators eliminate such undesirable
noises.
Bandwidth is exceptional, operating all the way down to 10Hz, making the pedal
useful for bass and synthesizer as well. Output impedance is superbly low,
capable of driving long lines without treble loss.
Earth ground for guitar and pedals provided by Main Amplifier, as
shown.
Specifications
| Item | Specification |
|---|---|
| Gain | 0dB |
| Input Impedance | 100kohms |
| Bandwidth | 10Hz to 10kHz |
| Maximum Signal | 1.5Vrms |
| Distortion | 1.70% |
| Size | 4.4” x 2.4” x 1.2” |
| Input Power | 9V to 12V @ 15mA |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>