N-TAC VT-44034 LED Flood Light Instruction Manual
- September 5, 2024
- N-TAC
Table of Contents
N-TAC VT-44034 LED Flood Light
Product Specifications :
- Model: VT-44034, VT-44053
- SKU: 23462, 23463
- Power: 30W, 50W
- Lumens @Wide Cone: 2310 Lm, 4000 Lm
- Input Voltage: AC: 220-240V, 50Hz
- Power Factor (DF): >0.9
- Color Rendering Index (CRI): 70
- Efficiency: 90+ Lm/w
- Life Span On/Off Cycle: 25,000 Hours, 15,000 Times
- Beam Angle:
- Operation Temperature:
- Body Type:
- Max. Mounting Height:
- Wire Length:
- Remote Range:
Product Usage Instructions
Installation :
- Ensure the power supply is turned off before installation.
- Mount the LED flood light securely in the desired location using appropriate fixtures.
- Connect the wires following the provided instructions and ensure a proper electrical connection.
- Adjust the beam angle as needed for optimal lighting coverage.
Operation:
To turn the LED flood light on or off, use the included remote control
within the specified range. Adjust the brightness and settings as required.
Maintenance :
Regularly clean the light fixture to prevent dust buildup that may affect
illumination. Check for any loose connections and replace any damaged parts
promptly.
FAQs (Frequently Asked Questions):
-
Q: What should I do if the LED flood light does not turn on?
A: Check the power source and connections to ensure they are secure. Replace the bulb if necessary. -
Q: Can I adjust the beam angle of the LED flood light?
A: Yes, you can adjust the beam angle to customize the lighting direction based on your needs. -
Q: Is the remote control waterproof?
A: The level of waterproofing for the remote control may vary. Please check the product specifications for more information.
INSTRUCTION MANUAL
LED FLOOD LIGHT
TECHNICAL DATA
| MODEL | VT-44034 | VT-44053 |
|---|
SKU
| ****
23462
| ****
23463
POWER| 30W| 50W
LUMENS
@WIDE CONE
| 2310 Lm| 4000 Lm
INPUT VOLTAGE| AC: 220-240V, 50Hz
DF| >0.9
CRI| 70
EFFICIENCY| 90+ Lm/w
LIFE SPAN| 25,000 Hours`
ON/OFF CYCLE| 15,000 Times
BEAM ANGLE| 115°
OPERATION TEMPERATURE| -20°C to +40°C
BODY TYPE| Aluminium
MAX.MOUNTING HEIGHT| <5 M
WIRE LENGTH| 0.15 M
REMOTE RANGE| ≤8-10 M
| NET WEIGHT | 0.35Kg | 0.48Kg |
|---|---|---|
| PROJECTED AREA (mm2) | 25168.5 | 31011.5 |
| DIMENSION | 164.5x34x153mm | 183.5x34x169mm |
*This product contains a light source of energy efficiency class
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.
In case of any query/issue with the product, please reach out to us at:
support@v-tac.eu For More products range, inquiry
please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Replace any cracked protective shield .
- Terminal block not included.
- Proper grounding should be ensured throughout the installation.
- Minimum distance from lighted objects 1m .
- Limitation of use indoors and outdoor.
NOTE : To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm’s reach.
- This marking indicates that this product should not be disposed of with other household wastes.
- Caution, risk of electric shock.
INSTALLATION DIAGRAM
INSTALLATION INSTRUCTION
-
DO NOT USE IN AREAS WITH LIMITED VENTILATION OR OUTSIDE THE RATED AMBIENT TEMPERATURE RANGE. CONNECT WITH WATERPROOF CABLE HOUSE ONLY. ENSURE ELEC-TRICITY IS SWITCH OFF BEFORE INSTALLATION.
-
Please do not mount to a surface that is prone to vibrations .*
Remove the screw and the bracket afterward. (Figure 1)Before drilling, mark the hole position for fixing the bracket onto the wall (Screw not supplied). (Figure 2) -
Screw the retaining bracket to the wall with a suitable quantity of screws. (Figure 4)
-
Mount the bracket back to the fixture. Adjust the floodlight according to the desired position. Tighten the screw. (Figure 5) Connect your main cable (HO5RN-F3G1.0mm2 Recommended) with the input lead of our product through the waterproof junction box. Note, the line (-) of the lead. (Need to use the junction box of IP65 or above, ensure to tighten the waterproof screw) Switch on the power to make sure if the product is working.
DISASSEMBLY DIAGRAM
For Market surveillance team only
REMOTE CONTROL FUNCTIONS
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>