VIKEYUNVK B0D8785MLP Projector with Wi-Fi and Bluetooth User Manual

Table of Contents

Announcements

Thank you for purchasing this digital projector series.
Please read through this manual for proper use of this product.
After reading, please put this manual together with the warranty card in a safe place for reference.
Please read this instruction manual if you need to know something or have any problems.

NOTICE

To prevent electric shock, do not open the chassis. There are no parts in the machine that the customer can repair. Please entrust qualified professional maintenance personnel to carry out maintenance.
This sign reminds the user that great care must be taken in operation and repair, therefore, it must be read carefully to prevent any failures.
This sign warns the user that uninsulated voltages in the unit may cause electric shock from the surface magnetic field, and therefore it is dangerous to contact any part of the unit.

WARNING

To prevent fire or electric shock, do not expose the unit to rain or moisture. Do not open
Warning: Do not look directly at or stare at the light beam from the lens. Strong light may cause eye discomfort or damage. Parents should supervise and educate children to use it properly.
Suitable for altitude less than 2000 m and non-hot climate

Apple on the same screen

The projector and Apple mobile phone are connected to the same network, open the projector, select the projector end “my apps→” . The system will open Eshare on the same screen software.
Apple mobile phone drop -down status bar, find “screen mirror” and open, wait for the search projector equipment, select the projector equipment and click on, wait for the connection, complete the same screen.

The projector and mobile phone are connected to the same network. Open the projector and select the “my apps→” . The system will open the EShare on screen software.
Download the software by scanning the QR code in the bottom left corner of the mobile phone interface
Open the downloaded software, select “Scan Code Link”, wait for the connection, and complete the same screen.

Find the top left corner of the main interface “ ” Here you can find some commonly used settings, including connecting to WiFi, Bluetooth, and projection settings.
In projection settings, screen scale: can be switched between “16:9 and 4:3”
Installation mode: including “desktop forward projection, desktop backward projection, lifting forward projection, and lifting backward projection”
Trapezoidal correction: When the projector is side projection, it can be adjusted through the remote control to achieve a square image
Global zoom: Press the “left and right” buttons on the remote control to zoom the screen, supporting 30% – 100% screen adjustment

The screen is blurry
Please maintain a distance of at least 1.0 meters for focusing until the image is clear
How to adjust the size of the screen
Find “Settings” in the upper left corner of the main interface and open it. Find “Projection” and “Global Zoom”. Press the “Left and Right” keys on the remote control to zoom the screen, supporting 30% – 100% screen adjustment
Unable to connect to the internet
Please check the router settings connected and ensure that the projector device’s WiFi is turned on. Enter the correct password and connect to the network.
Open the mobile hotspot test. If the mobile hotspot can be connected to the internet, it is a problem with the router’s settings. Please contact the router manufacturer for debugging

Set projection screen trapezoidal scale and projection mode

Setting up wifi Connection

Open the Settings menu on the remote control or the Settings on the home page.
On the WLAN network connection page, enable Wireless and Network as shown in the figure.
Select the home wifi signal network, enter the wifi password, and connect.

Read User Manual Online (PDF format)